Sharp UP-X300 (serv.man48) User Manual / Operation Manual ▷ View online
44
Category
Authority Item
Parameter
End of Session ADM
Automatic End of Session
Yes / No
(Automatic End of Session is
executed if “Yes” is selected)
ADM
Time for automatic End of Session *
1
00 : 00 - 23 : 59
ADM
Printer error at the End of Session reports Abort End of Session
/ Ignore printer error
ADM
Registration after End of Session *
2
Enable / Disable
*1
This is the time when Session of Day is processed. This option is effective when “Yes” is selected
at the “Automatic End of Session”.
at the “Automatic End of Session”.
*2
You can select to execute the registration enable or disable after executing the End of Session.
When “Disable” is selected, registration can’t execute before the End of Day is executed at the
Back Office.
When “Enable” is selected, you can execute registration before the End of Day is executed.
When “Disable” is selected, registration can’t execute before the End of Day is executed at the
Back Office.
When “Enable” is selected, you can execute registration before the End of Day is executed.
45
■ Edit Mode
For the parameters you set or change in the POS Programming module, there are two edit modes,
programming mode and maintenance mode.
You should first specify an edit mode before you start programming. When you select Edit Mode, the
edit mode selection window will open.
programming mode and maintenance mode.
You should first specify an edit mode before you start programming. When you select Edit Mode, the
edit mode selection window will open.
Programming mode
The parameters you will change directly affects the data base of your Back Office.
Maintenance mode
The parameters you will change are saved in the maintenance file. The data will be downloaded to the
data base by either executing a download operation manually in the Maintenance Data List module or
setting a date and time for downloading.
data base by either executing a download operation manually in the Maintenance Data List module or
setting a date and time for downloading.
NOTE
You can control and download the maintenance data on the Maintenance Data List in Supervisor of
System Setting module.
System Setting module.
46
■ Programming Restrictions
You can change authority levels of PLU, PLU Happy Hour, Set PLU and Combo among operators,
supervisors and submanagers.
supervisors and submanagers.
When you select Programming Restrictions from Administrator of System Setting module, the
following window will open.
Click the target column to restrict the function. “o” appears for the restricted function.
following window will open.
Click the target column to restrict the function. “o” appears for the restricted function.
47
■ Euro Status
When your country introduces EURO currency, you can change EURO status to suit the stages that
EURO is introduced. Prior to program EURO status, firstly refer to the EURO Migration Operation
section. The details of EURO migration procedure is described.
EURO is introduced. Prior to program EURO status, firstly refer to the EURO Migration Operation
section. The details of EURO migration procedure is described.
When you select Euro Status from Administrator of System Setting module, the following window will
open.
open.
Review the current euro status, and select a new euro status. Then click [OK] to change to that status.
To exit, click [CANCEL].
To exit, click [CANCEL].
NOTE
Please note that the selectable status for New Euro Status is as follows:
Current status
Selectable status
A
B
C
D
A
No
Yes
Yes
Yes
B
No
No
Yes
Yes
C
No
No
No
Yes
D
No
No
No
No
Click on the first or last page to see other UP-X300 (serv.man48) service manuals if exist.