DOWNLOAD Sharp UP-X300 (serv.man48) Service Manual ↓ Size: 1.58 MB | Pages: 127 in PDF or view online for FREE

Range

To make a range settings for department, PLU and dynamic PLU settings.  New data is
created. *1

New

To create a new data, such as to create a new PLU code.

Del

To delete the selected data.  Click the No. column of the target PLU to delete entire data
of the line.

NEXT PLU BLOCK To display next 1000 PLUs.  The details are described in the section PLU.

*1

When you select “Range”, the following window will open.  Enter start code and end

code using the keyboard connected to your POS server, and click [OK].  To cancel,

click [CANCEL].

In the Card Type editor, the icon [PLU SELECT] will be displayed at a parameter cell to prompt you
select a PLU.  When you select “PLU Select”, the following window will open.
Enter a part of PLU name at the column of Search Text, and click Search.
To find a PLU by PLU Menu, click the arrow at PLU Menu column, and click Search.
In case not specifying a PLU, click Not Specified.
To chancel, click Cancel.

■  Priority of programming setting

Each PLU (item) should belong to a department and each department should belong to a group.
For programming, some parameters commonly appear in the PLU, PLU Menu, Department, Group
programming.  If you program a parameter in Group programming, the setting affects all departments
belonging to the group; and all PLUs belonging to the departments.  However, the priority that your POS
system refers are PLU, PLU Menu, Department, Group from the highest.  Therefore, in case a
parameter is set in Group and PLU programming, for example,  the parameter set in the PLU has the
priority.

When [View] or [Print] is selected on a programming setting window, the following window will open.
In case it is required to set a range, for example PLU codes, an window to specify the range will appear.
Specify the range, and click [OK].

Refresh

Updates parameters.

Print (Printing)

Prints programming settings.

Exit (EXIT)

Exits from the window.

Filter

When you must specify a range for viewing, [Filter] will be displayed so that you can
change the filter setting.

Filter (range)
setting

Double click a module on the left window or click a module icon in the icon window.  Keep selecting a
module until the lowest module is selected.  The grid type editor or card type editor for the selected
option will open.  Start necessary programming.

For details of parameters in each module, please refer to each module section.  For the description of
programming items, a table may be shown.  For the abbreviation of authority level, please refer to “POS
Programming module list” section.

For better understanding for POS programming items, please firstly read through POS Terminal
Instruction Manual.

When you select POS Programming module on the main menu, the main menu of the POS
programming will appear.