Sharp UP-V9900 (serv.man3) Service Manual ▷ View online
2-8
Using BIOS
Introduction
Expansion
Installation Locations
Connecting Peripheral Devices
Turn On and Off the System Restoring HDD Drive to factory default configuration
Setting
Appendix A Appendix B
Troubleshooting
Connect power cord to rear side of the system as the pictures.
Connecting the Power Cord
Please cover the primary LCD rear cover
4
2-9
Using BIOS
Introduction
Expansion
Installation Locations
Connecting Peripheral Devices
Turn On and Off the System Restoring HDD Drive to factory default configuration
Setting
Appendix A Appendix B
Troubleshooting
▶ Checking the Voltage Selection
Verify that the voltage selection switch on the power supply of your system is properly set before turning on your system.
(The power switch in this system is located on the power supply inside.)
(The power switch in this system is located on the power supply inside.)
▶ If you set the voltage selection switch incorrectly, your system will be damaged. Make sure this switch is set correctly for your system environment.
▶ The UPV9900 series are set to 120V AC by default
Note !
Power Cord
Power Socket
❶
❷
❷
Set the switch to show
‘115’ for AC Voltage in the
100~120V range.
Set the switch to show ‘230’ for
AC Voltage in the 200~240V
range.
AC Voltage in the 200~240V
range.
❶
❶
❶
❷
❸
❸
❷
❶
❷
2-10
Using BIOS
Introduction
Expansion
Installation Locations Connecting Peripheral Devices
Turn On and Off the System
Restoring HDD Drive to factory default configuration
Setting
Appendix A Appendix B
Troubleshooting
2-10
Turn On the System
Turn On and Off the System
After setting up your system, you are ready to turn on the system. Follow the instructions :
Follow instructions to turn on/off the system as the below.
Power on the peripherals connected to the system.
Power Botton
Power Light
1
Press the <power> button located on the left side of the LCD panel.
2
The power light located on the upper right corner of the front LCD
panel lights up. Shortly thereafter, the system starts to check memory
capacity and executes a POST (Power-on Self Test). This series of
actions are to check whether all the system's functions are working
normally.
3
Shortly after the POST is completed, the initial Windows screen appears.(If a message related to creating a Recover Pro
partition is displayed, see ‘creating Recover Pro Partition’ on the following page.)
4
2-11
Using BIOS
Introduction
Expansion
Installation Locations Connecting Peripheral Devices
Turn On and Off the System
Restoring HDD Drive to factory default configuration
Setting
Appendix A Appendix B
Troubleshooting
Creating a Recover Pro partition
A brief description of Recover Pro is provided as the below.
A window appears when you turn on the system for the first time. You will see a message about creating a Recover Pro partition as the above.
To use the system backup/recovery function provided by Recover Pro, click on the <Confirm> button and create a Recover Pro partition.
Click on the first or last page to see other UP-V9900 (serv.man3) service manuals if exist.