DOWNLOAD Sharp UP-3500 (serv.man33) Service Manual ↓ Size: 4.79 MB | Pages: 127 in PDF or view online for FREE

➀

Connect the AC power cord to the AC adapter.

➁

Open the plug frame and connect the AC adapter 

plug to the AC adapter jack.

➂

Close the plug frame and lock the AC adapter plug 

to prevent disconnection.

➃

Plug the AC power cord into the wall outlet.

➀

➁

➃

➁

➂

AC adapter

AC power cord

AC adapter plug

AC adapter jack

Plug frame

Mode switch

Side cover

Contactless clerk switch

Power indicator

Operator display (touch panel)

This chapter describes the part names and functions of this POS terminal.

■

■

■

■

■ Front view

■

■

■

■

■ Rear view

The switch has the position ON ( I ) and STANDBY ( ).
Set the mode switch to the ON ( I ) position after the terminal has been plugged into the wall outlet.
The STANDBY ( ) position locks all operations of the POS terminal. When you select this position, the
screen will disappear.

When the mode switch is set to the ON ( I ) position with the POS terminal plugged in, the power indicator
at the lower right corner of the LCD panel will light up. When the mode switch is set to the STANDBY ( )
position or the POS terminal is unplugged, the power indicator will light out. The power indicator will remain
on while the display’s backlight is off.

Contactless clerk switch
Contactless clerk switch is used with contactless clerk keys.

Contactless clerk key
Put the key to the contactless clerk switch.

How to open the side cover
While moving the side cover release lever towards you,
pull the side cover and rotate the cover upward as shown
in the illustration at the right.

The application software will determine the usage and availability of the external port.

Side cover release lever
(located at the bottom cabinet)

Side cover

1

2

3

RESET switch
DO NOT move the reset switch unless instructed to do.
Doing so may damage or delete the data.

SD card slot

RS232 port

This POS terminal is equipped with a color LCD operator display. The operator display is a touch panel.
Operations can be performed by touching the screen (that shows keys or items in the window) of the
operator display.

■

■

■

■

■  Operator display (touch panel)

••••• Initial screen

Numeric entry: An entered figure is appeared.

M:

Received the electronic mail

L01 – L10: Level shift no.
P1 – P8:

Price level

V:

VAT shift mode

R:

Receipt switch off

r:

Receipt shift symbol

X:

Appears when the cash in drawer exceeds the programmed sentinel amount.
The sentinel check is performed for the total cash in drawer.

1 - 3:

When a VMP file (file1 - file3) used memory is 90% or more, its file number is indicated.

!:

Appears when the stock of the PLU which you entered is zero, negative or reaches the
minimum stock.

E:

Electronic journal memory is full. (Green 

➝ Yellow ➝ Red)

T:

T-Log memory is full. (Green 

➝ Yellow ➝ Red)

••••• Registration screen

The registration screen consists of several sub-windows (Receipt/Menu/Category/Function/Ten key pad).
When the cashier is signed-on, a registration screen is displayed automatically.

Ten key pad window:
The Ten key pad is used to enter various numerical data (e.g. clerk code, amounts, quantities).
When numeric entries are necessary (e.g. secret code is forced), the ten key pad pops up automatically.

Numeric entry: The entry displays here.