DOWNLOAD Sharp UP-3500 (serv.man33) Service Manual ↓ Size: 4.79 MB | Pages: 127 in PDF or view online for FREE

••••• 

••••• C

The character entry screen is used when you need to enter text data.

■

■

■

■

■ Customer display

There are two customer display options available for the UP-3500.
The pole type customer display or an integrated type rear display can be installed.

■

■

■

■

■ Screen save mode

The screen save function starts when the POS terminal is left idle for an extended period of time. You can
program the time for which your POS terminal should keep the normal status before it goes into the screen
saver mode. If the time has not been preset, the screen saver will be started after 100 minutes.
To exit the screen saver mode, touch anywhere on the touch panel (a secret code may be required at this
time).

••••• 

The character entry screen is used when you need to enter text data.

The preview of the key text (When the [PREVIEW] key is touched, the display is updated.)

This POS terminal allows the operator to use the following four clerk identification systems:

••••• Contactless clerk keys (max. 126 clerks)
••••• Clerk code entry (max. 255 clerks)
••••• Clerk entry keys (max. 10 clerks)
••••• WMF clerk keys (max. 127 clerks)*
* The WMF clerk key is not a SHARP product.
The standard POS terminal comes with a combination of the contactless clerk key and clerk code entry
systems by default. If you want to change the clerk identification system, contact your authorized SHARP
dealer.

Put one of the contactless clerk keys to the clerk switch.

Clerk code entry (1 through 9999)
Enter the clerk code by using the following procedure:
 (XXXX: Clerk code) 

➝ [CLK#] (Sign On)

Clerk entry keys
 

➝ [CLK n] (Sign On)

These keys identify clerks. Touch any one of these keys.

WMF clerk keys
Put one of the WMF clerk keys in the WMF clerk switch.

This chapter describes those steps required prior to using the POS terminal for the first time.

The display may be positioned for the best viewing angle.
The allowable tilt angle of the display is within 53 degrees as
shown in the illustration at the right.

CAUTION:
Do not pull the display beyond the maximum tilt angle nor apply
excessive pressure to the display.
When adjusting the display, hold the body of the terminal when
pulling the display of the terminal to minimize terminal
movement.

This POS terminal can be configured with multiple types of printers. For specific instructions related to the
handling and care of the printer, please refer to the applicable printer’s instruction manual.

53˚