Sharp UP-3300 (serv.man20) User Manual / Operation Manual ▷ View online
51
The master declaration procedure is as follows:
1.
Select “PGM2 MODE” from the mode selection menu
and touch the
ENTER
key.
2.
Select “DECLARATION” and touch the
ENTER
key.
3.
Select “MASTER DECLARE” and touch the
ENTER
key.
52
(2) When the back-up master breaks down — Master declaration at the
master
1) A satellite detects a breakdown of the back-up master through the system retry function
when it is sending updated GLU/PBLU data to both the master and back-up master. At
this point, the message “NO REPLY/BACKUP” appears in the pop-up window of the
display.
NO REPLY/BACKUP
2) The master declaration operation must be done at the master. This operation causes
each master to inform all satellites of the breakdown of the back-up master.
3) Each satellite in the IRC system sends updated GLU/PBLU data only to the master.
4) The master processes the received data and sends back the processed data to each
satellite.
Flow of a master declaration at the master
The master declaration procedure is the same as “(1) When the master breaks down.”
1) Detection of a master breakdown
3) Updated data
Satellite
(Processing)
4) Processed data
(Transmission stops.)
Back-up master
Master
2) Master declaration
53
3. Recovery declaration — when the master
or back-up master recovers from a breakdown
When the master or back-up master recovers from a breakdown, the recovery declaration
operation should be taken to inform satellites of the recovery.
(1) When the master recovers from a breakdown — Recovery declaration at
the back-up master
1) The recovery declaration operation is done at the back-up master.
2) Each satellite stops sending updated GLU/PBLU data to the back-up master.
3) The back-up master sends the updated GLU/PBLU data files to the master.
4) The back-up master informs all satellites of the master’s recovery.
5) The satellites restart sending updated GLU/PBLU data to the master.
Flow of a recovery declaration at the back-up master
3) Updated data file
Satellite
(Processing)
4) Master
recovery
information
recovery
information
2) Transmission stops.
Master declaration
1) Recovery
declaration
operation
declaration
operation
Back-up master
Master
5) Restart of updated
data transmission
data transmission
54
The recovery declaration procedure is as follows:
1.
Select “PGM2 MODE” from the mode selection
window and touch the
ENTER
key.
2.
Select “DECLARATION” and touch the
ENTER
key.
3.
Select “RECOVER DECLARE” and touch the
ENTER
key.
Click on the first or last page to see other UP-3300 (serv.man20) service manuals if exist.