Sharp UP-3300 (serv.man18) Service Manual ▷ View online
5. [5 SSP]
DISPLAY: SSP item selection screen
Select the desired item, press the ENTER key.
DISPLAY: OUTPUT read destination select screen
The setting content is displayed and printed
DISPLAY:
PRINTER:
File memory start address
Empty memory start address
Memory end address
Empty memory start address
Memory end address
– 8 –
CHAPTER 4. SRV MODE
PROGRAMMING
("2 SETTING")
("2 SETTING")
DISPLAY: SRV mode screen
Select "2 SETTING" and press the ENTER key.
DISPLAY: SETTING item selection screen
Select the desired item, press the ENTER key.
The item setting input screen is displayed.
1. [1 DEVICE CONFIG]
DISPLAY: Setting item select screen
Select "1 DEVICE ASSIGN" and press the ENTER key.
DISPLAY: DEVICE ASSIGN select screen
Select the item to be changed and press the ENTER key.
The setting content is described on Page 11.
– 9 –
[1 DEVICE CONFIG]
- [ 01 JOURNAL PRINTER ]
DISPLAY: Setting screen
DISPLAY
CONTENTS
SELECT ITEM
MRS
NOTE
TERMINAL#
Terminal No.
000 ~ 254
000
000 : Self terminal No.
This means local device.
1 ~ 254: Except self terminal No.
This means re-routed device.
Re-routing programming is only valid for printer.
CHANNEL#
Channel No.
0 ~ 7
0
0: No RS232 channel is assigned.
1 ~ 7 : RS232 channel is assigned.
PRINTER NAME
Connected printer name
SHARP UP-T80BP
SHARP ER-01PU
★
SHARP ER-03/04RP
EPSON TM-U950
EPSON TM-T88/85
EPSON TM-300
EJ FILE
AUTO CUTTER
Auto cutter function
No
★
Yes
PAPER SHEET
Paper sheet type selecting
ONE SHEET
★
TWO OR MORE
[1 DEVICE CONFIG]
- [02 RECEIPT PRINTER ]
DISPLAY: Setting screen
DISPLAY
CONTENTS
SELECT ITEM
MRS
NOTE
TERMINAL#
Terminal No.
000 ~ 254
000
000 : Self terminal No.
This means local device.
1 ~ 254: Except self terminal No.
This means re-routed device.
Re-routing programming is only valid for printer.
CHANNEL#
Channel No.
0 ~ 7
0
0: No RS232 channel is assigned.
1 ~ 7 : RS232 channel is assigned.
PRINTER NAME
Connected printer name
SHARP UP-T80BP
★
SHARP ER-01PU
SHARP ER-03/04RP
EPSON TM-U950
EPSON TM-T88/85
EPSON TM-300
AUTO CUTTER
Auto cutter function
No
★
Yes
– 10 –
DISPLAY
CONTENTS
SELECT ITEM
MRS
NOTE
PAPER SHEET
Paper sheet type selecting
ONE SHEET
★
TWO OR MORE
HEAD LOGO PRINT
Header logo print timming
PRE-PRINT
★
When a printer is not shared with another type of
printer, this selection should be done. This
selection allows paper saving.
printer, this selection should be done. This
selection allows paper saving.
EACH ISSUE
When a printer is shared with another type of
printer, this selection should be done. This
selection does not allows paper saving. But
RECEIPT LOGO will not be printed on another
type of printer.
printer, this selection should be done. This
selection does not allows paper saving. But
RECEIPT LOGO will not be printed on another
type of printer.
RCPT LENGTH
Minimum length for BILL on
receipt
receipt
00 ~ 30 lines
00
PRINT TYPE
ADDITION
★
SINGLE/DOUBLE
S/D + ADDITION
ADDITION + SINGLE
ADD WITHOUT TL
DOUBLE ADDITION
DOUBLE ADD +
SINGLE
SINGLE
[1 DEVICE CONFIG]
- [03 SLIP PRINTER ]
DISPLAY: Setting screen
DISPLAY
CONTENTS
SELECT ITEM
MRS
NOTE
TERMINAL#
Terminal No.
000 ~ 254
000
000 : Self terminal No.
This means local device.
1 ~ 254: Except self terminal No.
This means re-routed device.
Re-routing programming is only valid for printer.
CHANNEL#
Channel No.
0 ~ 7
0
0: No RS232 channel is assigned.
1 ~ 7 : RS232 channel is assigned.
PRINTER NAME
Connected printer name
SHARP ER-FBP40
★
EPSON TM-295
EPSON TM-U950
EPSON TM-T88/85
INITAL FEED#
Initial SLIP feed line number
00-64
00
SLIP MAX LINE
Slip print maximum line No.
00-99
99
VP PRINT TIMES
No. of times of validation print
0-9
1
*
It can be programmed in the SRV mode whether or not to Validate the limits to SLIP feed initial feed , the No. of times of slip printing , and the
number of times of Validation printing.
number of times of Validation printing.
– 11 –
Click on the first or last page to see other UP-3300 (serv.man18) service manuals if exist.