Sharp UP-3300 (serv.man18) Service Manual ▷ View online
918-D: 1. Tip paid includes cash tip
2. Clearing of tip totalizer at clerk Z1 report
3. Printing of tip totalizer on the clerk report
1. Tip paid
includes
cash tip
cash tip
2. Clearing of tip
totalizer at
server Z1 report
server Z1 report
3. Printing of tip
totalizer on the
server report
server report
918-D
Yes
No
No
0
★
Yes
1
Yes
No
2
Yes
3
No
No
No
4
Yes
5
Yes
No
6
Yes
7
[JOB#919] : MRS=4000
919-A: 1. Guest look up system or PB look up system
1. Guest look up system or PB look up system
919-A
PBLU
2
GLU
4
★
919-B: 1. Checking of clerk# on guest check when a reorder is
made
2. Entry of the number of guests
3. Guest check number
1. Checking of
clerk# on
guest check
when a
reorder is
made
guest check
when a
reorder is
made
2. Entry of the
number of
guests
guests
3. Guest check
number
919-B
Yes
Inhibit
Auto generation
0
★
Manual
1
Compulsory
Auto generation
2
Manual
3
No
Inhibit
Auto generation
4
Manual
5
Compulsory
Auto generation
6
Manual
7
919-C: 1. Change of entry amount by with / without
Note: If change of entry amount is set to "No", the Depart-
ment for COMBO MEAL is updated (by minus or plus
amount) in order to match the turnover totals (DEPT.
Total = PLU Normal Sales Total).
This update should be considered for the influence of
VAT calculation.
amount) in order to match the turnover totals (DEPT.
Total = PLU Normal Sales Total).
This update should be considered for the influence of
VAT calculation.
2. PB entry
3. Amount printing when PLU unit price is zero
1. Change of
entry amount
by with /
without
by with /
without
2. PB entry
3. Amount
printing when
PLU unit price
is zero
PLU unit price
is zero
919-C
No
Non-compulsory
No
0
★
Yes
1
Compulsory
No
2
Yes
3
Yes
Non-compulsory
No
4
Yes
5
Compulsory
No
6
Yes
7
919-D: 1. Conversion ST printing of native ST
1. Conversion SBTL print of native SBTL
919-D
Yes
0
★
No
4
[JOB#920] : MRS=0040 : INLINE PROGRAMMING
AREA
920-A: 1. Racapitulate registration.
2. Non add entry printing.
3. Back-up master function.
1. Racapitulate
registration.
2. Non add entry
printing.
3. Back-up
master
function.
function.
920-A
Yes
Only last one
before item entry
Not
0
★
Exist
1
All
Not
2
Exist
3
No
Only last one
before item entry
Not
4
Exist
5
All
Not
6
Exist
7
920-B: 1. System report and down-load job is executed in the back-
up master.
2. The GLU finalization is executed in the satellite.
3. The clerk system
1. System report
and
down-load job
is executed in
the back-up
master.
down-load job
is executed in
the back-up
master.
2. The GLU
finalization is
executed in
the satellite.
executed in
the satellite.
3.The clerk
system
920-B
Disable
Enable
Centralized
0
★
Individual
1
Disable
Centralized
2
Individual
3
Enable
Enable
Centralized
4
Individual
5
Disable
Centralized
6
Individual
7
920-C: 1. Broadcast communication (in-line)
2. PGM-mode programming at the satellite
1. Broadcast
communication
2. PGM-mode programming at
the satellite
920-C
Exist
Disable
0
Enable
1
By terminal No.
Disable
4
★
Enable
5
920-D: 1. The register is
1. The register is
920-D
Standard alone machine
0
★
Satellite
1
Master
2
Back up master
3
[JOB#921] : MRS=0000
921-A: 1. Promortion ( M&M ) specification
1. Promortion ( M&M ) specification
921-A
Normal
0
★
Set selling ( SUK Spec. )
1
– 20 –
921-B: 1. GLU system
2. Drive thru system
3. Drive thru entry
1. GLU system
2. Drive thru
system
3. Drive thru entry
921-B
Centralized
Centralized
Non-compulsory
0
★
Compulsory
1
Individual
Non-compulsory
2
Compulsory
3
Individual
Centralized
Non-compulsory
4
Compulsory
5
Individual
Non-compulsory
6
Compulsory
7
921-C: 1. VAT shift operation timing .
2. Bill printing method.
1. VAT shift operation
timing .
2. Bill printing method.
921-C
Only at the start of
transaction
transaction
Whole printing per each
issue
issue
0
★
Continuous
1
Only at the end of
transaction
transaction
Whole printing per each
issue
issue
2
Continuous
3
921-D: 1. Drive thru machine location
1. Drive thru machine location
921-D
Cashier Station
0
★
Order Taker
1
Counter
2
[JOB#922] : MRS=0008 : INLINE PROGRAMMING
AREA
922-A,B: Not used (Fixed at “00”)
922-C,D: 1. Programming of the SRN transmission speed and car-
rier-off waiting time
Transmission speed
Carier-off waiting time
922-CD
480 kbps
3.2 msec
01
6.4 msec
02
9.6 msec
04
12.8 msec
00
1 Mbps
1.6 msec
09
3.2 msec
10
4.8 msec
12
6.4 msec
08
★
[JOB#923] : MRS=0010 : INLINE PROGRAMMING
AREA
923-A,B: 1. The record number for REQUEST of T-LOG POLLING
(x100)
1. The record number for REQUEST of T-LOG
POLLING (x100)
923-AB
0000
∼
9900
00-99
Explanation for satellite:
Ex: When AB=10 The satellite will request to the master to poll the
T-log when the T-log records exceed 1,000.
923-C: 1. Electronic Journal resetting
2. Bill number print
3. T-log function
1. Electronic
Journal resetting.
2. Bill number
print
3. T-log
function
923-C
Enable
Yes
No
0
Yes
1
★
No
No
2
Yes
3
Disable
Yes
No
4
Yes
5
No
No
6
Yes
7
923-D:
1. Polling cycle (second)
1. Polling cycle (second)
923-D
0
∼
9 Sec.
0
∼
9
[JOB#924]: MRS=0000 : INLINE PROGRAMMING
AREA
924-A: 1. Report printing when consolidation daily and periodic
cashier reading or resetting is taken.
2. PLU save file.
1. Report printing when consolidation
daily and periodic cashier reading or
resetting is taken.
resetting is taken.
2. PLU save
file.
924-A
Printing of report on individual register
Not
0
★
Exist
1
Printing of both i.e. reports on
individual machines and consolidation
report on the entire system
individual machines and consolidation
report on the entire system
Not
4
Exist
5
924-B: 1. Save file except for PLU.
Programming whether or not to lock REG-mode entries
after individual daily total resetting
after individual daily total resetting
2. Locking after clerk resetting
3. Locking after term clerk resetting
1. Save file
except for
PLU.
PLU.
2. Locking after
clerk resetting
3. Locking after
term clerk
resetting
resetting
924-B
Not
Yes
Yes
0
★
No
1
No
Yes
2
No
3
Exist
Yes
Yes
4
No
5
No
Yes
6
No
7
924-C: Programming whether or not to lock REG-mode entries after
individual daily total resetting when the system has no save
file.
file.
1. Locking Hourly resetting.
2. Locking after General resetting
1. Locking Hourly
resetting.
2. Locking after General
resetting
924-C
Yes
Yes
0
★
No
1
No
Yes
2
No
3
– 21 –
924-D: Programming whether or not to lock REG-mode entries after
individual periodic total resetting
1. Locking after Daily Net resetting
2. Locking after General resetting
1. Locking after Daily Net
resetting
2. Locking after General
resetting
924-D
Yes
Yes
0
★
No
1
No
Yes
2
No
3
[JOB#925] : MRS=0100 : INLINE PROGRAMMING
AREA
925-A: 1. Selection of the method of daily total general consolida-
tion resetting at the master.
Method -1 : Those data that has individually been reset
and the current sales data are reset together.
Method -2 : Only those data that has individually been
reset is reset.
2. Clearing of the individual resetting memory at the time of
consolidation daily total general resetting.
3. Execution of RESET CLEAR when consolidation daily
total general resetting has not been taken.
1. Selection of
the method of
daily total
general
consolidation
resetting at
the master.
daily total
general
consolidation
resetting at
the master.
2. Clearing of
the individual
resetting
memory at
the time of
consolidation
daily total
general
resetting.
resetting
memory at
the time of
consolidation
daily total
general
resetting.
3. Execution of
RESET
CLEAR when
consolidation
daily total
general
resetting has
not been
taken.
CLEAR when
consolidation
daily total
general
resetting has
not been
taken.
925-A
Method -1
Yes
Disable
0
★
Enable
1
No
Disable
2
Enable
3
Method -2
Yes
Disable
4
Enable
5
No
Disable
6
Enable
7
925-B: 1. Any entry operation is inhibited until RESET CLEAR is
executed after consolidation daily total transaction reset-
ting has been taken.
ting has been taken.
2. Various individual resetting
1. Any entry operation is inhibited until
RESET CLEAR is executed after
consolidation daily total transaction
resetting has been taken.
consolidation daily total transaction
resetting has been taken.
2. Various
individual
resetting
resetting
925-B
Yes
Disable
0
Enable
1
★
No
Disable
2
Enable
3
925-C: 1. Report printing when consolidation daily and periodic total
transaction reading or resetting is taken
1.Report printing when consolidation daily and
periodic total transaction reading or resetting is
taken
taken
925-C
Printing of both i.e. reports on individual machines and
consolidation report on the entire system
0
★
Printing of consolidation report on the entire system
1
Printing of report on individual register
2
925-D: 1. PLU/IN GREDIENT stock control system.
2. Resetting in the open store state.
1. PLU/IN GREDIENT stock
control system.
2. Resetting in the
open store state.
925-D
Centralized
Disable
0
★
Enable
1
Individual
Disable
4
Enable
5
[JOB#926] : MRS=0004
926-A: 1. Void item print on KP that has already ordered.
1.Void item print on KP that has already ordered.
926-A
Yes
0
★
No
1
926-B: 1. Sending “REFUND DATA” on KP
1.Sending “REFUND DATA” on KP
926-B
Yes
0
★
No
2
#926-C:
Not used (Fixed at "0")
#926-D:
1. DEPT/PLU text printing
2. Check VP format
1. DEPT/PLU text printing
2. Check VP
926-D
Normal
Normal
0
French check
2
Double
Normal
4
★
French check
6
[JOB#927] MRS = 0000
#927-A:
1. Rounding up of the units digit of amount
#927-B:
1. Rounding down of the units digit of amount
1. Rounding the units digit of amount
927-AB
Common destination
00
★
Netherlands/Switzerland
82
Norway
54
#927-C:
1. Difference memory (Difference between before-round-
ing and after-rounding)
2. Limit on the least significant digit in entering the amount
on item
1. Difference memory
2. Limit on the least
significant digit in
entering the amount on
item
entering the amount on
item
927-C
No
Arbitary
0
★
0 only
1
0 and 5 only
2
Yes
Arbitary
4
0 only
5
0 and 5 only
6
#927-D:
1. Application of rounding
2. Limit on the least significant digit in entering the amount
of payment
1. Application of rounding
2. Limit on the least
significant digit in
entering the amount of
payment
entering the amount of
payment
927-D
Item & Payment
Arbitary
0
★
0 only
1
0 and 5 only
2
Payment
Arbitary
4
0 only
5
0 and 5 only
6
– 22 –
[JOB#928] : MRS=0064
#928-A:
1. Printing of slip logo text
1. Printing of slip logo text
928-A
No
0
★
Yes
1
#928-B:
1. VP message printing on slip
2. Header line print on slip paper when a reorder is made.
1. VP message printing
on slip
2. Header line print on slip
paper when a reorder
is made.
is made.
928-B
Check only
Printed
0
★
Not
1
Check & Credit
Printed
2
Not
3
928-C:
1. Printing of PLU on bill when it is 0
2. Printing of text for associated PLU in COMBO MEAL on
bill.
1. Printing of PLU on
bill when it is 0
2. Printing of text for
associated PLU in COMBO
MEAL on bill.
MEAL on bill.
928-C
Yes
Yes
0
No
2
No
Yes
4
No
6
★
#928-D:
1. Printing of PB/NBAL on slip
2. Compulsory Bill print system
1. Printing of
PB/NBAL on slip
2. Compulsory Bill print system
928-D
Yes
According to each media’s preset
0
Compulsory for every entry
1
Compulsory for PB
2
No
According to each media’s preset
4
★
Compulsory for every entry
5
Compulsory for PB
6
*
The slip printing at NBAL in GLU system is not compul-
sory always.
sory always.
[JOB#929] : MRS=0000
#929-A:
1. The solid line printing under item printing
2. Sorted printing on Bill (Receipt/Slip) when sorted receipt
function
1. The solid line printing
under item printing
2. Sorted printing on Bill
(Receipt/Slip) when
sorted receipt function
sorted receipt function
929-A
No
No
0
★
Yes
2
Yes
No
4
Yes
6
929-B:
1. Logo text print on journal
2. Clerk-Z with open GLU ( #181 )
1. Logo text print on
journal
2. Clerk-Z with open GLU
( #181 )
929-B
No
Disable
0
★
Enable
1
Yes
Disable
2
Enable
3
929-C,D: Not used (Fixed at “00”)
[JOB#980] : MRS=0000
980-A:
1. Entry of location
2. Labor cost
3. Registration for Drink Dispenser articles on POS.
1.Entry of
location
2. Labor cost
3. Registration for
Drink Dispenser
articles on POS.
articles on POS.
980-A
Inhibit
Not
Disable
0
★
Enable
1
Calculate
Disable
2
Enable
3
Allow
Not
Disable
4
Enable
5
Calculate
Disable
6
Enable
7
980-B:
1. Item printing that registrated by Drink Dispenser.
2. Total amount rounding when a transaction is finalized
directly by CHECK or CREDIT key. (For SCA)
*
This selection is not effective at Manual TAX 1-6 system.
1. Item printing that
registrated by Drink
Dispenser.
Dispenser.
2. Total amount rounding
when a transaction is
finalized directly by
CHECK or CREDIT key.
(For Australia)
finalized directly by
CHECK or CREDIT key.
(For Australia)
980-B
Skip
Yes (Rounding)
0
★
No (Not rounding)
2
Print
Yes (Rounding)
4
No (Not rounding)
6
980-C:
1. LEVEL SHIFT at L2 / L3 ( for SUK ) when LEVEL SHIFT
return timing method is AUTO and BY ONE ITEM in
PGM setting
PGM setting
2. PRICE SHIFT at P2 / P3 ( for SUK ) when PRICE SHIFT
return timing method is AUTO and BY ONE ITEM in
PGM setting
PGM setting
3. PINT SHIFT at PINT sale ( for SUK )
1. LEVEL SHIFT
at L2 / L3 ( for
SUK ) when
LEVEL SHIFT
return timing
method is
AUTO and BY
ONE ITEM in
PGM setting
SUK ) when
LEVEL SHIFT
return timing
method is
AUTO and BY
ONE ITEM in
PGM setting
2. PRICE SHIFT
at P2 / P3 ( for
SUK ) when
PRICE SHIFT
return timing
method is
AUTO and BY
ONE ITEM in
PGM setting
SUK ) when
PRICE SHIFT
return timing
method is
AUTO and BY
ONE ITEM in
PGM setting
3. PINT
SHIFT at
PINT sale
( for SUK )
PINT sale
( for SUK )
980-C
Repeat
Repeat
Repeat
0
★
One shot
( Return to
normal )
1
One shot
( Return to P1 )
Repeat
2
One shot
( Return to
normal )
3
One shot
( Return to L1 )
Repeat
Repeat
4
One shot
( Return to
normal )
5
One shot
( Return to P1 )
Repeat
6
One shot
( Return to
normal )
7
– 23 –
Click on the first or last page to see other UP-3300 (serv.man18) service manuals if exist.