Sharp XE-A303 (serv.man6) User Manual / Operation Manual ▷ View online
23
Part
1
QUICK START GUIDE
Part
2
Part
3
3. Unit price programming
(Press
s
to skip
. / Press
A
to terminate.)
4.
Associated dept. programming (Press
s
to skip
. / Press
A
to terminate.)
5.
Sign programming (Press
s
to skip
. / Press
A
to terminate.)
ENTER PLU TYPE
0071 PLU
0071 PLU
s
(2) Press the
s
key to register setting.
On the upper line of the display, guidance message
for the next setting will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next setting will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the sign does not need to be
changed from "(+)". Otherwise, press
:
key to
display "(-)".
Each time
Each time
:
key is pressed, the display shows "(-
)" and "(+)" alternately.
Choose "(+)" for positive entry and "(-)" for negative
entry.
Default setting is "(+)" for all 1800 PLU codes.
Choose "(+)" for positive entry and "(-)" for negative
entry.
Default setting is "(+)" for all 1800 PLU codes.
SIGN
0071 (+)
0071 (+)
s
(2) Press the
s
key to register the associated
dept. code.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
ENTER DEPT#
0071 1
0071 1
1
(1) Enter an associated dept. code using numeric key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
For deleting PLU, enter 0 instead of an associated
dept. code.
ENTER DEPT#
0071 01
0071 01
s
(2) Press the
s
key to register the unit price.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting will
be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting will
be displayed.
PRICE
0071 500
0071 500
500
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
PRICE
0071 0.00
0071 0.00
s
(3) Press the
s
key to register the item name.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
A303_1(En) 06.7.22 9:20 AM Page 23
6.
Function programming (Press
s
to skip
. / Press
A
to terminate.)
To program for the incremented PLU code, return to the step 2.
When you want to program for other than incremented PLU code, return to the step 1.
When you want to program for other than incremented PLU code, return to the step 1.
7.
Terminate programming
Sign
• In case negative is programmed for a PLU/subdepartment whose associated department is positive
department, the PLU/subdepartment serves as a coupon PLU/subdepartment, and split price entry is
disallowed for the PLU/subdepartment. It is invalid to program positive for a PLU/subdepartment whose
associated department is negative.
disallowed for the PLU/subdepartment. It is invalid to program positive for a PLU/subdepartment whose
associated department is negative.
Unit price
PLU/subdept. 1/0
PLU code
Item name
Associated dept.
Print
PGM
0.00
0.00
A
(1) Press the
A
key to terminate PLU programming.
PLU.0072
0072 0.00
0072 0.00
ENTER[00]KEY
0072 0.00
0072 0.00
s
(2) Press the
s
key to register the setting.
On the upper line of the display, immediately after
displaying the current text data for the next PLU,
guidance message will be displayed.
On the lower line of the display, the corresponding
PLU code will be displayed.
The PLU code is automatically incremented for a
new PLU programming, and ready for text
programming for the incremented PLU code.
displaying the current text data for the next PLU,
guidance message will be displayed.
On the lower line of the display, the corresponding
PLU code will be displayed.
The PLU code is automatically incremented for a
new PLU programming, and ready for text
programming for the incremented PLU code.
(1) Go to (2) when the function does not need to be
changed from "PLU". Otherwise, press
:
key to
display "SUBDEPT".
Each time
Each time
:
key is pressed, the display shows
"SUBDEPT" and "PLU" alternately.
Choose "PLU" for using the PLU code as PLU and
"SUBDEPT" for using the PLU code as
subdepartment.
Default setting is "PLU".
Choose "PLU" for using the PLU code as PLU and
"SUBDEPT" for using the PLU code as
subdepartment.
Default setting is "PLU".
24
A303_1(En) 06.7.22 9:20 AM Page 24
25
Part
1
QUICK START GUIDE
Part
2
Part
3
Please refer to "Guidance for text programming" on page 13 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
P
key for text entry just after you
start programming with the
s
key, the cash register will automatically be ready for text entry.
Then a little after displaying guidance message indicating what programming you are in, the register may ask you to
enter the first parameter. Referring to the corresponding “Procedure”, enter a parameter and start character entries.
enter the first parameter. Referring to the corresponding “Procedure”, enter a parameter and start character entries.
Clerk names
(12 digits)
*1 For clerk no. 1 to 4, the names "CLERK 01" to "CLERK 04", are automatically assigned respectively by
default. You also need to assign clerk codes for each clerk. By default, clerk codes 1 to 4 are programmed for
clerk no. 1 to 4. For clerk no. 5 through 25, refer to "Clerk code assignment" on page 76.
clerk no. 1 to 4. For clerk no. 5 through 25, refer to "Clerk code assignment" on page 76.
*2 Use the
S
and
B
keys to delete unnecessary text data as necessary.
Logo messages
(6 lines and 30 digits for each line)
The register can print programmed messages on every receipt. On the standard model, a 6-line logo message is
printed on the receipt. If you want to print in other logo message format, please change the format. For the
programming details, refer to page 76. The options are listed below:
printed on the receipt. If you want to print in other logo message format, please change the format. For the
programming details, refer to page 76. The options are listed below:
* “Header 3-line message” type: 1 to 3
“Footer 3-line message” type : 4 to 6
“Header 6-line message” type: 1 to 6
“Header 3-line and footer 3-line message” type: 1 to 6 (1 to 3 as header, 4 to 6 as footer)
“Header 6-line message” type: 1 to 6
“Header 3-line and footer 3-line message” type: 1 to 6 (1 to 3 as header, 4 to 6 as footer)
@
*Line number
(1-6)
Character keys
(max. 30 digits)
A
s
To keep the current setting
To program another line
s
4
P
CLERK NAME PROG.
5
5
ENTER CLERK NO.
0.00
0.00
CLERK 01
01 067
01 067
DAVID _
01 032
01 032
CLERK NAME PROG.
0.00
0.00
ENTER CLERK NO.
0.00
0.00
PGM
0.00
0.00
s
5
P
1
@
DAVID
S S S
*
2
s
A
Print
Operator display
Key operation example
s
@
To program another clerk
Character keys
(max. 12 digits)
Clerk no.
(1-25)
A
To keep current setting
s
5
P
*1
8
Text Programming
A303_1(En) 06.7.22 9:20 AM Page 25
26
Logo message print format (6 types)
To print the logo message “THANK YOU” using double sized characters and centering on the third line.
• A 6-line logo message is preprogrammed when shipped. Please start entering from the first line
when you first program a logo message.
• The preprogrammed messages are displayed for each line in the logo message programming. In
the example above, "XE-A303" is displayed. Please overwrite the preprogrammed message
entering your desired one when programming.
entering your desired one when programming.
LOGO TEXT PROG.
4
4
ENTER LINE NO.
0.00
0.00
_ =X=E=-=A
3 032
3 032
_ =X=E=-=A
3 032
3 032
_ =X=E=-=A
3 W 032
3 W 032
H=A=N=K= =Y=O=U_
3 W 032
3 W 032
H=A=N=K= =Y=O=U_
3 032
3 032
K= =Y=O=U _
3
3
LOGO TEXT PROG.
0.00
0.00
ENTER LINE NO.
0.00
0.00
PGM
0.00
0.00
s
4
P
3
@
S S S S S S
W
THANK
S
YOU
W
S S S S S S
s
A
Print
Operator display
Key operation example
Graphic logo
Header 2nd line
Graphic logo
Graphic logo
Header 3rd line
Header 1st line
Header 3-line
message and
footer 3-line
messages
(Default setting)
message and
footer 3-line
messages
(Default setting)
Header 3-line message
Footer 3-line
message
message
Header 6-line
message
message
Header 2nd line
Header 3rd line
Header 1st line
Header 2nd line
Header 3rd line
Header 1st line
Header 2nd line
Header 3rd line
Header 1st line
Header 5th line
Header 6th line
Header 4th line
Footer 5th line
Footer 6th line
Footer 4th line
Footer 5th line
Footer 6th line
Footer 4th line
A303_1(En) 06.7.22 9:20 AM Page 26
Click on the first or last page to see other XE-A303 (serv.man6) service manuals if exist.