Sharp UP-800 (serv.man8) Handy Guide ▷ View online
PRODUCT TRAINING
MODEL UP800
T-Log
T-Log on the UP800 is different to that of the UP600/700
PLU Storage and Sales can be selected to be Centralised or Individual at IRC Set-Up
Centralised T-Log = Less RAM requirements on client terminals
Individual = PLU data stored and reported on per terminal
PRODUCT TRAINING
MODEL UP800
Master Resetting
1. Turn machine off
2. Set the RESET switch to on.
3. Power on whilst Holding down the JOURNAL feed key and Set the Reset switch
to Off
to Off
4. When the “Enter Password” message is displayed press the following keys in the
correct order as shown below.
correct order as shown below.
RESET
1
2
3
4
**Switch is covered by plate
PRODUCT TRAINING
MODEL UP800
Master Reset 2
1. Turn machine off
2. Set the RESET switch to on.
3. Power on whilst Holding down the RECEIPT & JOURNAL feed key and set the
reset switch to Off
reset switch to Off
4. When the “Enter Password” message is displayed press the following keys in the
correct order as shown below.
correct order as shown below.
RESET
1
2
3
4
PRODUCT TRAINING
MODEL UP800
Service Reset
1. Turn machine off
2. Set the RESET switch to ON.
3. Power the machine On
4. Set the RESET switch to OFF.
RESET
Service Reset Procedure
Click on the first or last page to see other UP-800 (serv.man8) service manuals if exist.