Sharp UP-800 (serv.man8) Handy Guide ▷ View online
PRODUCT TRAINING
MODEL UP800
Hardware Overview
Printers
•
Paper end sensor
•
Graphic logo
•
Sorted receipt and kitchen printing
•
Items capitulated/not
– Kitchen printer
– Receipt
•
Line after item
•
Ticket entry
– Stub receipts
PRODUCT TRAINING
MODEL UP800
Hardware Overview
Dimensions
.
External dimensions (Without drawer)
338 (W) x 440 (D) x 265 (H) mm
This is the height from Bottom of foot to highest point with Display tilted
PRODUCT TRAINING
MODEL UP800
Hardware Overview
Contactless Clerk Key
.
Same as existing models UP3301/UPX300
Contactless Clerk lock
PRODUCT TRAINING
MODEL UP800
Hardware Overview
Connectivity
Side of machine
Rear of machine
Ch1 is a Standard RS232 9wayD connection located at the side of machine. The maximum speed of this channel is
115200bps
There are 4 serial ports as standard on the UP800 series.
Ch2 is a Standard RS232 9wayD connection located at the side of machine. (CH2 will supply 5v but this is not enabled as
default from out of the box, a jumper switch on the main board SP9 located directly behind CH2 must be set on pins 1 and 2 to
supply the 5v)
default from out of the box, a jumper switch on the main board SP9 located directly behind CH2 must be set on pins 1 and 2 to
supply the 5v)
Used for Scanning and Utilities / IPL download using POSUtilitytool4.exe
The maximum speed of this channel is
115200bps
Ch3 is an RJ45 connection located at the rear of the machine
Maximum baud rate for this channel is 115200 bps
Ch4 is an RJ45 connection located at the rear of the machine
Maximum baud rate for this channel is 115200 bps
Click on the first or last page to see other UP-800 (serv.man8) service manuals if exist.