Sharp UP-600 / UP-700 (serv.man29) FAQ ▷ View online
Index
Index
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
•
•
On an early production of machine, there seems to be a network problem,
On an early production of machine, there seems to be a network problem,
if a machine was powered off for a short period you could lose the network
if a machine was powered off for a short period you could lose the network
and a Master reset may be required .
and a Master reset may be required .
•
•
The UP-600/700 seems to have powered off and locked out.
The UP-600/700 seems to have powered off and locked out.
•
•
The UP-600/700 is locked out and the word “OFF” is displayed on screen,
The UP-600/700 is locked out and the word “OFF” is displayed on screen,
this happened when the mode switch position was being changed.
this happened when the mode switch position was being changed.
•
•
When taking a System PLU Report the figures appear to be to higher than
When taking a System PLU Report the figures appear to be to higher than
is on the general Report.
is on the general Report.
Firmware
Firmware
Index
Index
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
•
•
On some early machines the clerk key lock is forced into the machine and
On some early machines the clerk key lock is forced into the machine and
the key can not be read correctly.
the key can not be read correctly.
•
•
Are there any hardware changes to the UP-600/700 from earlier
Are there any hardware changes to the UP-600/700 from earlier
productions.
productions.
•
•
Will the Slaves machines in a system be updated after Program download
Will the Slaves machines in a system be updated after Program download
from POS Utility ?
from POS Utility ?
Hardware
Hardware
PLU/EAN
PLU/EAN
Queries
Queries
In Inline setting in PGM there is a “Look Up order”
How does this work ?
How does this work ?
The Look-Up Order refers only to the EAN codes
(not PLU) on a Satellite machine.
The machine will look up which ever machine you
have selected first, if it is not found, it will then try
to find the code in the other machine.
(not PLU) on a Satellite machine.
The machine will look up which ever machine you
have selected first, if it is not found, it will then try
to find the code in the other machine.
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
PLU/EAN
PLU/EAN
Queries
Queries
I have programmed some EAN’s on my slave
machine
but when scanning these items they appear to
have lost their text and price.
machine
but when scanning these items they appear to
have lost their text and price.
You have probably got your system to lookup the
Master 1st and as these EAN’s were not
programmed in the master the slave will pull back
an EAN code that has been learnt by the master,
hence the dept text etc.
To overcome this problem you could set the line
920-C to update machines automatically, or have
look up at the slave 1st, or disable the Learning
feature.
Master 1st and as these EAN’s were not
programmed in the master the slave will pull back
an EAN code that has been learnt by the master,
hence the dept text etc.
To overcome this problem you could set the line
920-C to update machines automatically, or have
look up at the slave 1st, or disable the Learning
feature.
UP-600/700 Frequently Asked Questions
UP-600/700 Frequently Asked Questions
Click on the first or last page to see other UP-600 / UP-700 (serv.man29) service manuals if exist.