Sharp ER-A450S (serv.man8) User Manual / Operation Manual ▷ View online
31
Tax rate
* A: Enter a corresponding tax rate number. For example, when you program a tax rate as tax rate 1, enter “1”,
and when you program it as tax rate 6, enter “6”.
**
Sign and tax rate: XYYY.YYYY
• The lowest taxable amount is valid only when you select add on tax system. If you select VAT
(Value added tax) system, it is ignored.
• If you make an incorrect entry before pressing the second
≈
key in programming a tax rate,
cancel it with the
c
key; and if you make an error after pressing the second
≈
key, cancel it
with the
:
key. Then program again from the beginning.
• If you select VAT system, the sign which you program is ignored.
Programming the tax rate (+4%) as tax rate 2 with lowest taxable income as 0.12
1.
Press the
◊
key.
◊
2.
Enter the tax rate “2”.
2
≈
3.
Enter the tax rate “+4%.”
4
≈
4.
Enter the lowest taxable amount “12.”
12
5.
Press the
;
key to finalize the programming
;
and generate a programming report.
Lowest taxable
amount
amount
Tax rate 2
Tax rate : 4%
Print
0 . 0 0
2 1 2
2 0 . 0 0
2 0 . 0 0
P 0 . 0 0
Example
Note
≈
≈
;
**Sign and tax rate
Lowest taxable amount
max. five digits:
0.00 to 999.99
When the lowest taxable amount is zero
◊
1 - 6
* A
:
To delete
Procedure
PGM 2
Programming the tax rate
9
Tax rate= 0.0001 to 100.0000
Sign
-
/
+
=
1
/
0
32
Job-Code-Based Programming
This section illustrates how to program items using job codes. Using job codes allows you to program a wide
variety of items in comparison with direct programming.
variety of items in comparison with direct programming.
Start this programming by entering a corresponding job code as shown below.
All the items which can be programmed by the job-code-based programming are listed on this page and the
following, and those which can also be programmed by the direct programming are marked with the symbol
“
following, and those which can also be programmed by the direct programming are marked with the symbol
“
” that follows job codes.
When setting the parameters for a job code, the digit that is blinking is the one that can be changed.
To go to the position of the parameter that you want to change, press either of the following keys :
To go to the position of the parameter that you want to change, press either of the following keys :
.
Moves the blinker to the right.
º
Moves the blinker to the left.
Setting the date
Enter day (one or two digits), month (two digits), and year (two digits) in this sequence.
Date
2610
. ≈
260801
;
Print
Key operation
Example
2610
.
≈
;
Date (five or six digits)
Procedure
Direct
2610
PGM 2
Setting the date and time
1
Note
Direct
2110
.
≈
Setting the time
Set the time using the 24-hour format. For example, when the time is set to 2:30 AM, enter 230; and when it is
set to 2:30 PM, enter 1430.
set to 2:30 PM, enter 1430.
2611
.
≈
;
Time (max. four digits)
Procedure
Direct
2611
PGM 2
33
Setting the register number
When your store has two or more registers, it is practical to set separate register numbers for their identification.
You may set them in a maximum of six digits.
You may set them in a maximum of six digits.
Setting the consecutive number
The consecutive number is increased by one each time a receipt is issued.
Enter a number (one to four digits) that is one less than the desired starting number.
Enter a number (one to four digits) that is one less than the desired starting number.
.
≈
2613
;
A number (one to four digits) that is one
less than the desired starting number
To begin the count from 0001
Procedure
2613
PGM 2
Register number
2612
. ≈
123456
;
Print
Key operation
Example
2612
.
≈
;
Register number
(one to six digits)
To set the register number “0”
Procedure
2612
PGM 2
Setting the register and consecutive numbers
2
Time
2611
. ≈
1430
;
Print
Key operation
Example
34
Consecutive
number
number
2613
. ≈
1000
;
Print
Key operation
Example
Tax rate
*A: Enter a corresponding tax rate number. For example, when you program a tax rate as tax rate 1, enter 1
and when you program it as tax rate 6, enter 6.
**
Sign and tax rate: XYYY.YYYY
• The lowest taxable amount is valid only when you select add on tax system. If you select VAT
(Value added system), it is ignored.
• If you make an incorrect entry before pressing the third
≈
key in programming a tax rate, cancel
it with the
c
key; and if you make an error after pressing the third
≈
key, cancel it with the
:
key. Then program again from the beginning correctly.
• If you select VAT system, the sign which you program is ignored.
Note
Lowest taxable
amount
amount
Tax rate 2
Tax rate : 4%
2711
. ≈
2
≈
4
≈
12
;
Print
Key operation
Example
2711
*
A
.
≈
≈
≈
;
:
When the lowest taxable amount is zero
To delete
max. five digits:
0.00 to 999.99
0.00 to 999.99
1 to 6
Lowest taxable
amount
**Sign and
tax rate
Procedure
Direct
2711
PGM 2
Programming the tax rate
3
Tax rate= 0.0001 to 100.0000
Sign
-
/
+
=
1
/
0
Click on the first or last page to see other ER-A450S (serv.man8) service manuals if exist.