Sharp ER-A450S (serv.man8) User Manual / Operation Manual ▷ View online
35
Your machine is equipped with 20 standard departments and up to 50 optional departments.
Your machine allows you to perform the following programming for each department:
Your machine allows you to perform the following programming for each department:
Functional programming
You can set each department for:
SICS (Single Item Cash Sale) / SIF (Single Item Finalization)
• SICS
If the first registration is to a department set for SICS, the sale is finalized as soon as the department key is
pressed. If the sale is preceded by registrations to departments not set for SICS, a sale to a department set
for SICS does not finalize and can be repeated until the
pressed. If the sale is preceded by registrations to departments not set for SICS, a sale to a department set
for SICS does not finalize and can be repeated until the
;
key is pressed.
• SIF
Whenever a sale is made to a department set for SIF, the sale is finalized as soon as the department key is
pressed.
pressed.
Type of unit price entry
You may select one of the following four types of unit price entry for each department.
• Open and preset
• Preset only
• Open only
• Inhibit department key
• Open and preset
• Preset only
• Open only
• Inhibit department key
2110
PGM 2
Programming for departments
4
*
Item:
Selection:
Entry:
A to D
Always enter 0.
0
E
SIF/SICS /Normal
SIF
2
SICS
1
Normal
0
F
Always enter 0.
0
G
Type of unit price entry
Open and preset
3
Preset only
2
Open only
1
Inhibit department key
0
2110
.
≈
≈
:
;
c
Dept. code
* A B C D E F G
To program for the dept. other than the following dept.
To keep the current setting
To program for the following dept.
The current
setting
is displayed.
Procedure
36
Tax status
Assign a tax status to each department. When entries are made into taxable departments in a transaction, tax is
automatically computed according to the associated tax rate as soon as the transaction is completed.
automatically computed according to the associated tax rate as soon as the transaction is completed.
*
Item:
Selection:
Entry:
A
Always enter 0.
0
B
VAT6 or TAX6
Yes
1
No
0
C
VAT5 or TAX5
Yes
1
No
0
D
VAT4 or TAX4
Yes
1
No
0
E
VAT3 or TAX3
Yes
1
No
0
F
VAT2 or TAX2
Yes
1
No
0
G
VAT1 or TAX1
Yes
1
No
0
• The tax system of your machine has been factory–set to automatic VAT1–6. If you desire to
select any of automatic tax 1–6, manual VAT1–6, manual VAT1, manual tax 1–6, and the
combination of the automatic VAT 1–3 and the automatic tax 4–6, consult your dealer.
combination of the automatic VAT 1–3 and the automatic tax 4–6, consult your dealer.
• When the combination of the automatic VAT1–3 and automatic tax 4–6 system is selected, one of
the VAT1(G), VAT2(F) and VAT3(E) can be selected in combination with tax 4–6.
Example: BCDEFG= 100100, 110100, 111010
Example: BCDEFG= 100100, 110100, 111010
Note
2111
.
≈
≈
:
;
* A B C D E F G
To keep the current setting
To program for the following dept.
c
To program for the dept. other than the following dept.
The current
setting
is displayed.
Dept. code
Procedure
Direct
2111
PGM 2
A through G
2110
. ≈
3
≈
0000003
:
;
;
Print
Key operation
Example
37
Tax status
2111
. ≈
4
≈
0000110
:
c
2
≈
0000101
:
;
;
Print
Key operation
Example
A limit amount (HALO) of entry
You can set upper limit amounts (HALO: High Amount Lockout) for each department. The limit is effective for
the REG-mode operations and can be overridden in the MGR mode. HALO limit is represented by two figures
as follows:
the REG-mode operations and can be overridden in the MGR mode. HALO limit is represented by two figures
as follows:
* AB is the same as A x 10
B
.
A: Significant digit (1 through 9)
B: Number of zeros to follow significant digit (0 through 8)
B: Number of zeros to follow significant digit (0 through 8)
For example, presetting 14 (100.00) here means that amount entries of up to 100.00 are allowed in the REG
mode. But when you preset 18, the upper limit amount is 999999.99.
mode. But when you preset 18, the upper limit amount is 999999.99.
HALO limit
2112
. ≈
1
≈
95
:
;
;
Print
Key operation
Example
2112
.
≈
≈
:
;
* A B
To keep the current setting
c
The current
setting
is displayed.
Dept. code
Procedure
Direct
2112
PGM 2
38
Alphanumeric characters
You can program a maximum of 16 characters (item label) for each department. (However, the default setting is
for a 12-character label.)
Select the characters you want to program, referring to section “2 How to program alphanumeric characters” in
chapter “PRIOR TO PROGRAMMING”.
for a 12-character label.)
Select the characters you want to program, referring to section “2 How to program alphanumeric characters” in
chapter “PRIOR TO PROGRAMMING”.
Unit price
You can program unit prices up to a maximum of six digits (9999.99). Even if a department is not programmed
to allow the entry of preset unit prices in functional programming (job 2110), the department is automatically
changed to allow the entry of preset unit prices by this programming entry.
to allow the entry of preset unit prices in functional programming (job 2110), the department is automatically
changed to allow the entry of preset unit prices by this programming entry.
Unit price
1110
. ≈
1
≈
1000
:
;
;
Print
Key operation
Example
1110
.
≈
≈
:
;
To keep the current setting
Unit price
(max. six digits)
c
The current
setting
is displayed.
Dept. code
Procedure
Direct
1110
PGM 2
PGM 1
Label
programmed
for dept. 1
programmed
for dept. 1
2114
. ≈
1
≈
FRUITS
:
;
;
Print
Key operation
Example
2114
.
≈
≈
:
;
To program spaces
Character keys
(max. 16 digits)
c
Dept. code
Procedure
2114
PGM 2
Click on the first or last page to see other ER-A450S (serv.man8) service manuals if exist.