Sharp XL-S10H (serv.man2) User Manual / Operation Manual ▷ View online
03/10/28
XL-S10H_E_3.fm
25
TINSEA001SJZZ
XL-S10H
8
7
6
5
4
3
2
1
9
10
Re
fe
re
nces
Maintenance
Cleaning the CD pickup lens
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
solution, then with a dry cloth.
Caution:
z
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
may damage the cabinet finish.
z
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
tions.
Cleaning the tape-handling parts
z
Dirty heads, capstan or pinch roller can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
z
When cleaning the heads, pinch roller, etc., unplug the unit which
contains high voltages.
contains high voltages.
z
After long use, the deck's heads and capstan may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
z
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
side from which signals are read. Do not mark this surface.
z
Keep your discs away from direct sunlight, heat, and excessive
moisture.
moisture.
z
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
Do not touch the laser pickup lens. If fin-
gerprints or dust accumulate on the
pickup, clean it gently with a dry cotton
swab.
gerprints or dust accumulate on the
pickup, clean it gently with a dry cotton
swab.
Erase head
Recording/Playback
head
Capstan
Pinch roller
Recording/Playback
head
Capstan
Pinch roller
D
A
B
C
NO
YES
Correct
Correct
03/10/28
XL-S10H_E_3.fm
26
TINSEA001SJZZ
XL-S10H
Re
fe
re
nces
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Amplifier
Tuner
CD player
Cassette deck
Speaker
Power source
AC 230 - 240 V, 50 Hz
Power consump-
tion
tion
Power on: 25 W
Power stand-by: 0.9 W
Dimensions
Width: 160 mm (6-5/16")
Height: 242 mm (9-1/2")
Depth: 250 mm (9-7/8")
Height: 242 mm (9-1/2")
Depth: 250 mm (9-7/8")
Weight
2.3 kg (5.1 lbs.)
Output power
RMS: 10 W (5 W + 5 W) (10 % T.H.D.)
Output terminals
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
(recommended: 32 ohms)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Type
Compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
pickup
D/A converter
1-bit D/A converter
Frequency
response
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency
response
response
125 - 8,000 Hz (normal tape)
Signal/noise ratio
50 dB (recording/playback)
Wow and flutter
0.3 % (WRMS)
Type
10 cm (4") full-range speaker
Maximum input
power
power
10 W
Rated input power
5 W
Impedance
4 ohms
Dimensions
Width: 130 mm (5-1/8")
Height: 240 mm (9-7/16")
Depth: 161 mm (6-5/16")
Height: 240 mm (9-7/16")
Depth: 161 mm (6-5/16")
Weight
1.4 kg (3.1 lbs.)/each
0310
SHARP CORPORATION
9906
TINSEA001SJZZ
03K N YT 1
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the re-
placement, of this product subject to the conditions listed below:-
placement, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It
does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tam-
pering with the product, or repair other than by a Service Facility appointed by Sharp.
pering with the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the prod-
uct is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase
must be provided.
must be provided.
4. The guarantee does not cover carriage costs, audio tapes, compact discs or batteries.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it
was purchased. Where this is not possible, please contact the Sharp Customer Information Cen-
tre on the telephone number given below.
tre on the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 08705 274277
(or (01) 676 0648 if telephoning from Ireland)
0310
SHARP CORPORATION
9906
TINSEA001SJZZ
03K N YT 1
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the re-
placement, of this product subject to the conditions listed below:-
placement, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It
does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tam-
pering with the product, or repair other than by a Service Facility appointed by Sharp.
pering with the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the prod-
uct is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase
must be provided.
must be provided.
4. The guarantee does not cover carriage costs, audio tapes, compact discs or batteries.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it
was purchased. Where this is not possible, please contact the Sharp Customer Information Cen-
tre on the telephone number given below.
tre on the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect
these rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 08705 274277
(or (01) 676 0648 if telephoning from Ireland)