Sharp XL-S10H (serv.man5) Service Manual ▷ View online
XL-S10H
3 – 1
Audio
XL-S10H
Service Manual
XS10H
Market
E
CHAPTER 3.
MECHANICAL DESCRIPTION
[1] DISASSEMBLY
Note 1:
After removing the connector for the optical pickup from the connector,
wrap the conductive aluminium foil around the front end of the connec-
tor so as to protect the optical pickup from electrostatic damage.
wrap the conductive aluminium foil around the front end of the connec-
tor so as to protect the optical pickup from electrostatic damage.
Caution on Disassembly
Follow the below-mentioned notes when disassembling the unit and
reassembling it, to keep it safe and ensure excellent performance:
1) Take cassette tape and compact disc out of the unit.
2) Be sure to remove the power supply plug from the wall outlet
Follow the below-mentioned notes when disassembling the unit and
reassembling it, to keep it safe and ensure excellent performance:
1) Take cassette tape and compact disc out of the unit.
2) Be sure to remove the power supply plug from the wall outlet
before starting to disassemble the unit.
3) Take off nylon bands or wire holders where they need to be
removed when disassembling the unit. After servicing the unit,
be sure to rearrange the leads where they were before disas-
sembling.
be sure to rearrange the leads where they were before disas-
sembling.
4) Take sufficient care on static electricity of integrated circuits and
other circuits when servicing.
STEP
REMOVAL
PROCEDURE
FIGURE
1
Top Cabinet
1. Screw...........................(A1) x 5
2. Socket.........................(A2) x 2
3. Flat Cable....................(A3) x 1
2. Socket.........................(A2) x 2
3. Flat Cable....................(A3) x 1
1
2
Side Panel
1. Screw...........................(B1) x 4
1
3
Rear Panel
1. Screw..........................(C1) x 2
2. Screw..........................(C2) x 2
2. Screw..........................(C2) x 2
1
2
2
4
Main PWB
1. Screw..........................(D1) x 2
2. Socket.........................(D2) x 2
3. Socket.........................(D3) x 1
2. Socket.........................(D2) x 2
3. Socket.........................(D3) x 1
2
5
Front Panel
1. Screw...........................(E1) x 2
3
6
Power PWB
1. Screw...........................(F1) x 2
2. Screw...........................(F2) x 1
2. Screw...........................(F2) x 1
3
7
Display PWB
1. Knob............................(G1) x 1
2. Screw..........................(G2) x 8
2. Screw..........................(G2) x 8
4
8
Tape Mechanism
1. Screw..........................(H1) x 1
2. Screw..........................(H2) x 4
2. Screw..........................(H2) x 4
4
9
Open/Close
Switch PWB
Switch PWB
1. Screw...........................(J1) x 1
2. Hook............................(J2) x 2
2. Hook............................(J2) x 2
5
10
CD Mechanism
1. Screw...........................(K1) x 4
5
Figure 1
Figure 2
Figure 3
(A3)x1
(A2)x2
Top Cabinet
Open/Close
Switch PWB
Switch PWB
CD Mechanism
Side Panel
(Right)
(Right)
Rear Panel
(C1)x2
ø3x10mm
ø3x10mm
Side Panel
(Lift)
(Lift)
(A1)x1
ø3x10mm
ø3x10mm
(A1)x2
ø3x10mm
ø3x10mm
(A1)x1
ø3x10mm
ø3x10mm
(A1)x1
ø3x10mm
ø3x10mm
(B1)x2
ø3x10mm
ø3x10mm
(B1)x2
ø3x10mm
ø3x10mm
Top Cabinet
(D1)x2
ø3x10mm
(D2)x1
(C2)x2
ø3x10mm
Top Cabinet
(D2)x1
(D3)x1
Main PWB
Power PWB
(E1)x2
ø3x10mm
(F1)x2
ø3x10mm
(F2)x1
ø3x10mm
Power
PWB
PWB
AC cord
Front Panel
XL-S10H
3 – 2
Figure 4
Figure 5
Open
Cassette
Holder
Holder
(G2)x8
ø2.6x10mm
ø2.6x10mm
(H2)x4
ø3x10mm
ø3x10mm
(H1)x1
ø2.6x10mm
ø2.6x10mm
(G1)x1
Front Panel
Display PWB
PWB
Spring
Lever
Tape
Mechanism
Mechanism
(J1)x1
ø2.6x10mm
(J2)x2
(K1)x4
ø2.6x10mm
Open/Close
Switch PWB
Top Cabinet
CD Mechanism
Display
