Sharp XL-DAB20NH User Manual / Operation Manual ▷ View online
XL-DAB10N 20H_001 UK.fm
8
9
9
Listening to the iPod
Supported iPod models:
●
iPod touch (3
rd
generation)
●
iPod touch (2
nd
generation)
●
iPod touch (1
st
generation)
●
iPod classic
●
iPod with video
●
iPod nano (5
th
generation)
●
iPod nano (4
th
generation)
●
iPod nano (3
rd
generation)
●
iPod nano (2
nd
generation)
●
iPod nano (1
st
generation)
●
iPod with colour display
●
iPod mini
Caution:
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
Notes:
●
Once the iPod is connected to the unit it will begin
charging.
charging.
●
The iPod unit cannot be charged whilst the main unit is
in USB mode.
in USB mode.
Notes:
●
If you have an iPod that does not have an iPod 30 Pin
connector, you can use an audio cable to connect it to
the AUX IN socket.
connector, you can use an audio cable to connect it to
the AUX IN socket.
●
iPhone is not supported by this system.
Notes:
●
The unit is installed with the iPod adaptor No. A.
●
Remove and insert the recommended iPod adaptor if
required (refer table on page 8).
required (refer table on page 8).
■ iPod adaptor connection
iPod
Adaptor
No.
iPod Description
Capacity
A
5G iPod (with video)
30GB
A
U2 iPod with video
30GB
A
iPod classic
80GB & 120GB
A
4G iPod & U2 iPod
20GB
A
4G iPod
40GB
A
iPod photo
40GB & 60GB
A
iPod with colour display
60GB
A
iPod Touch
8GB & 16GB
A
iPod Touch (2nd Gen.)
8GB, 16GB &
32GB
A
iPod Touch (3rd Gen.)
32GB, 64GB
B
iPod nano
2GB & 4GB
B
iPod nano (2nd Gen.)
2GB, 4GB & 8GB
B
iPod nano (3rd Gen.)
4GB & 8GB
B
iPod nano (4th Gen.)
8GB & 16GB
B
iPod nano (5th Gen.)
8GB, 16GB
C
iPod mini
4GB & 6GB
D
iPod photo & colour U2 iPod
20GB & 30GB
D
iPod with colour display
20GB, 60GB
E
5G iPod with video
60GB & 80GB
E
iPod classic
160GB
A
The marking shows
which iPod fits
which iPod fits
■ To insert iPod adaptor
1
Press the ON/STAND-BY button to turn the power on.
2
Open the iPod cover by pulling up the tip.
3
Insert the iPod adaptor into the iPod dock and connect
your iPod.
your iPod.
■ To remove iPod adaptor
Insert the tip of a screwdriver (“–” type, small) into the iPod
adaptor hole as shown and lift upward to remove.
adaptor hole as shown and lift upward to remove.
pull up
iPod
Dock connector
iPod (bottom)
iPod dock
iPod
connector
connector
iPod adaptor
XL-DAB10N 20H_001 UK.fm
9
Listening to the iPod (continued)
Simply remove the iPod from the iPod dock. It is safe to do
so even during playback.
so even during playback.
Note:
When navigating the iPod menus with remote control, do
not operate any of the buttons on the iPod unit. The volume
level is adjusted by pressing the VOL (+ or –) button on the
main unit or the remote control. Adjusting the volume on
the iPod unit gives no effect.
When navigating the iPod menus with remote control, do
not operate any of the buttons on the iPod unit. The volume
level is adjusted by pressing the VOL (+ or –) button on the
main unit or the remote control. Adjusting the volume on
the iPod unit gives no effect.
iPod operation:
The operations described below depend on the generation
iPod you are using.
The operations described below depend on the generation
iPod you are using.
System on operation:
When the main unit is powered on, the iPod unit will
automatically power on when docked in the unit (including
TIMER function).
When the main unit is powered on, the iPod unit will
automatically power on when docked in the unit (including
TIMER function).
System off (stand-by) operation:
When the main unit is turned to stand-by mode, the docked
iPod unit will automatically turn to charging mode.
When the main unit is turned to stand-by mode, the docked
iPod unit will automatically turn to charging mode.
Notes:
●
If the TV Out setting is already turned on at video menu,
the video is automatically displayed on the TV screen
when ENTER key is pressed.
the video is automatically displayed on the TV screen
when ENTER key is pressed.
●
To return to watching video on iPod screen, press the
MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds
until “iPodDISP” appears. Repeat steps 2 and 3.
MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds
until “iPodDISP” appears. Repeat steps 2 and 3.
●
During iPod video playback, pressing the DISPLAY (TV
OUT) button will not toggle video out display between
iPod and TV.
OUT) button will not toggle video out display between
iPod and TV.
iPod playback detection function:
Once the play button on the iPod unit is pressed, the main
unit will automatically change to iPod function overriding
the previous function selected.
Once the play button on the iPod unit is pressed, the main
unit will automatically change to iPod function overriding
the previous function selected.
Caution:
Unplug all accessories for the iPod before inserting it into
the iPod dock.
Unplug all accessories for the iPod before inserting it into
the iPod dock.
■ iPod playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod button on the remote control or
FUNCTION button on the main unit repeatedly to
select iPod function.
FUNCTION button on the main unit repeatedly to
select iPod function.
3
Insert iPod unit in iPod dock of main unit.
4
Press the / button to start playback.
■ To disconnect iPod
■ Navigating the iPod menus
1
Press the MENU button to view the menu on iPod unit.
Press it again to go back to previous menu.
Press it again to go back to previous menu.
2
Use the
or
button to select an item on the menu
and then press ENTER button.
XL-DAB10
■ Watching videos on a TV connected to
iPod
1
Press the DISPLAY (TV OUT) button for more than 2
seconds. “TV DISP” will appear on display.
seconds. “TV DISP” will appear on display.
2
Select the desired video from iPod unit to be played.
3
Press the ENTER button to start playback.
■ Various iPod functions
Function
Main
unit
Remote
control
Operation
Play
Press in the pause
mode.
mode.
Pause
Press in the playback
mode.
mode.
Track
up/down
up/down
____
Press in the playback or
pause mode.
If you press the button
in the pause mode,
press the / button to
start the desired track.
pause mode.
If you press the button
in the pause mode,
press the / button to
start the desired track.
Fast
forward/
reverse
forward/
reverse
____
Press and hold down in
the playback mode.
Release the button to
resume playback.
the playback mode.
Release the button to
resume playback.
Display
____
iPod back light ON.
Press for more than 2
seconds to toggle the
video out display
between iPod or TV.
Press for more than 2
seconds to toggle the
video out display
between iPod or TV.
Repeat
____
Press to toggle repeat
mode.
mode.
Shuffle
____
Press and hold down to
toggle shuffle mode.
toggle shuffle mode.
iPod
Menu
Menu
____
Press to view the iPod
menu during iPod
function.
menu during iPod
function.
iPod
Enter
Enter
____
Press to confirm the
selection.
selection.
iPod
Cursor
Up/
Down
Cursor
Up/
Down
____
Press to select the iPod
menu.
menu.
XL-DAB10N 20H_001 UK.fm
10
9
9
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the
CD format and CD-R/RW with MP3 or WMA files, but
cannot record on them. Some audio CD-R and CD-RW
discs may not be playable due to the state of the disc or the
device that was used for recording.
CD format and CD-R/RW with MP3 or WMA files, but
cannot record on them. Some audio CD-R and CD-RW
discs may not be playable due to the state of the disc or the
device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3. MP3 is a type of audio
code which is processed by significant compression
from the original audio source with very little loss in
sound quality.
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3. MP3 is a type of audio
code which is processed by significant compression
from the original audio source with very little loss in
sound quality.
●
This system supports MPEG 1 Layer 3 and VBR files.
●
During VBR file playback, time counter in the display
may differ from its actual playback time.
may differ from its actual playback time.
●
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that
include audio files which are compressed with
Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media
Player.
WMA files are Advanced System Format files that
include audio files which are compressed with
Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media
Player.
●
“MP3” and “WMA” indicator will light up after the unit
reads information on an MP3 or WMA disc.
reads information on an MP3 or WMA disc.
●
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Caution:
●
Do not place two discs in one disc tray.
●
Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
etc). It may cause malfunctions.
●
Do not push the disc tray whilst it is moving.
●
If the power fails whilst the tray is open, wait until the
power is restored.
power is restored.
●
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
move the unit away from the TV or radio.
●
Be sure to place 8 cm (3") disc in the middle of the disc
tray.
tray.
●
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Notes for CD or MP3/WMA disc:
●
When the end of the last track is reached during fast
forward, the CD operation will be stopped. When the
beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
forward, the CD operation will be stopped. When the
beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
●
Rewritable multi-session discs with unfinished writing,
can still be played.
can still be played.
XL-DAB10
■ Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button on the remote control or
FUNCTION button on the main unit repeatedly to select
CD function.
FUNCTION button on the main unit repeatedly to select
CD function.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press the OPEN/CLOSE button to close the disc tray.
6
Press the / button to start playback. After the last
track is played, the unit will stop automatically.
track is played, the unit will stop automatically.
■ Various disc functions
Function
Main
unit
Remote
control
Operation
Pause
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
mode. Press the /
button to resume
playback from the
paused point.
Track up/
down
down
____
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Fast
forward/
reverse
forward/
reverse
____
Press and hold down in
the playback mode.
Release the button to
resume playback.
the playback mode.
Release the button to
resume playback.
XL-DAB10
XL-DAB10N 20H_001 UK.fm
11
Advanced CD or MP3/WMA disc playback
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected
disc.
select the desired track whilst playing the selected
disc.
●
The Direct Search buttons allow you to select up to
number 9.
number 9.
●
When selecting number 10 or higher, use the “10+”
button.
button.
Notes:
●
A track number higher than the number of tracks on the
disc cannot be selected.
disc cannot be selected.
●
During random play, direct search is not possible.
To stop playback:
Press and hold
/ button on main unit or press CD
button.
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the / button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the / button.
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page
11 and then press the PLAY MODE button until “RPT ALL”
appears.
To cancel repeat play:
Press the PLAY MODE button again until “
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the / button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the / button.
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page
11 and then press the PLAY MODE button until “RPT ALL”
appears.
To cancel repeat play:
Press the PLAY MODE button again until “
”
disappears.
The tracks on the disc can be played in random order
automatically.
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RANDOM” icon light up. Press the /
button.
Press and hold down PLAY MODE button on the remote
control until “RANDOM” icon light up. Press the /
button.
To cancel random play:
Press and hold the PLAY MODE button. “RANDOM” icon
will disappear.
Press and hold the PLAY MODE button. “RANDOM” icon
will disappear.
Notes:
●
During random playback, repeat function is not
possible.
possible.
●
Playback will stop after all the tracks is played
randomly.
randomly.
●
If you press the
button during random play, you can
move to the track selected next by the random
operation. On the other hand, the
operation. On the other hand, the
button does not
allow you to move to the previous track. The beginning
of the track being played will be located.
of the track being played will be located.
●
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
automatically. (You cannot select the order of the
tracks.)
You can choose up to 32 selections for playback in the
order you like.
order you like.
■ Direct track search
A. For example, to choose 13
1
Press the “10+” button once.
2
Press the “1” button.
3
Press the “3” button.
B. For example, to choose 130
1
Press the “10+” button twice.
2
Press the “1” button.
3
Press the “3” button.
4
Press the “0” button.
■ Repeat play
Selected track number
■ Random play
■ Programmed play
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
the remote control to enter the programming save
mode.
2
Press the
or
buttons on the remote control to
select the desired track.
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the CLEAR button.
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the CLEAR button.
5
Press the / button to start playback.
Selected track number
Click on the first or last page to see other XL-DAB20NH service manuals if exist.