DOWNLOAD Sharp XL-DAB20NH Service Manual ↓ Size: 9.76 MB | Pages: 28 in PDF or view online for FREE

XL-DAB10N 20H_001 UK.fm

9

9

To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit,
press the   button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents
will be cleared.

Adding tracks to the programme:
If a programme has been previously stored, the
“MEMORY” indicator will be displayed. Press the
MEMORY button repeatedly until last track appears. Then
follow steps 2 - 4 to add tracks. The new tracks will be
stored after the last track of the previous programme.

To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode,
press the MEMORY button repeatedly.

To clear the programmed selections:
During stop mode, press the MEMORY button repeatedly
to select the unwanted track. Press the CLEAR button to
delete it.

●

When a disc is ejected, the programme is automatically
cancelled.

●

If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.

●

During the programme operation, random play is not
possible.

●

Programmed play steps for MP3/WMA disc is same as
that of USB on page 14.

To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.

●

Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.

If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.

These folders can be selected by the FOLDER (

 or 

)

button on the remote control. If there is no supported file
formats inside the selected folder, the folder is skipped and
the next folder will be selected.

Example: How to set folder number if MP3/WMA format
files are recorded as below figure.

●

The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.

●

For CD MP3/WMA, 255 numbers of folders and files
inclusive of the folders which have non playable files
can be read.

 Press the CD   button. The total number in memory will

appear.

■ About folder playback order

ROOT folder is set as folder 1.

As for folders inside ROOT folder (Folder A and Folder
B), the folder which is recorded earlier on the disc will
be set as folder 2 and folder 3.

As for folder inside Folder A (Folder C and Folder D),
the folder which is recorded earlier on the disc will be
set as folder 4 and folder 5.

Folder E that is inside Folder D will be set as folder 6.

ROOT
(FOLDER 1) 

FOLDER A
(FOLDER 2)

FOLDER B
(FOLDER 3)

FILE 9
FILE 10

FILE 3
FILE 4
FILE 5

FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)

FOLDER C
(FOLDER 4)

FOLDER D
(FOLDER 5)

FILE 1
FILE 2

XL-DAB10N 20H_001 UK.fm

To play back CD-R/RW.

Note:
If the track is skipped during playback, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.

Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.

Note:
To pause playback:
Press the  /  (USB  / ) button.

■ Procedure to playback MP3/WMA disc

Press the CD button, and load an MP3/WMA disc. After
disc is loaded, disc info will be displayed.

Press the FOLDER (

 or 

) button, to select desired

playback folder. (Folder mode on)

Select desired file to be played back by pressing the 
or  

button.

Press the  /  (CD  / ) button. Playback will start.

●

File name, Title, Artist and Album name are
displayed if they are recorded on the disc.

●

Press the FOLDER (

 or 

) button, and the folder

can be selected even though it is in playback mode.
It will continue playback mode in the 1st track of the
selected folder.

●

Display content can be changed by pressing the CD
DISPLAY button.

TOTAL 
indicator

Total number of files

Total files in Folder 3

FOLDER number

File name display

Counter display

Title display

Artist display

Album display

■ To play back USB/MP3 player with folder 

Press the USB button on the remote control or
FUNCTION button  on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.

Select desired file to be played back by pressing the 
or  

button.

Press the  /  (USB  / ) button. Playback will start.

●

Title, Artist and Album name are displayed if they are
recorded in the USB memory device.

●

Display content can be changed by pressing the
DISPLAY button.

XL-DAB10

XL-DAB10N 20H_001 UK.fm

9

9

●

SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.

●

Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.

●

This USB memory’s format supports FAT 16 or FAT 32.

●

SHARP cannot guarantee that all USB memory
devices will work on this audio system.

●

USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.

●

This USB memory cannot be operated via USB hub.

●

The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.

●

External HDD-storage cannot be played back via USB
terminal.

●

If the data inside the USB memory is large, it may take
longer time for the data to be read.

Notes:
●

This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, the file will be
automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the
unspecified file, turn off the unit and then turn it on
again.

●

This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.

●

The USB port is only intended for direct connection to
a USB memory device without any cable.

Repeat play can play all tracks sequence continuously.

To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the  /  (USB  / ) button.

To repeat one folder:
Press the PLAY MODE button repeatedly until “RPT FLD”
appears. Press the  /  (USB  / ) button.

To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the  /  (USB  / ) button.

To cancel repeat play:
Press the PLAY MODE button repeatedly until “NORMAL”
appears and “

” disappear.

You can choose up to 32 selections for playback in the
order you like.

■ To play back USB/MP3 player with folder 

Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the track
information will be displayed.

Press the FOLDER  (

 or 

) button to select desired

playback folder. To start playback, go to step 4. To
change the playback folder, press the FOLDER (

 or

) button to select another folder.

Select desired file to be played back by pressing the 
or  

button.

Press the  /  (USB  / ) button. Playback will start.

●

Title, Artist and Album name are displayed if they are
recorded in the USB memory device.

●

Display content can be changed by pressing the
DISPLAY button.

■ To remove USB memory device

Press the   (USB  ) button to stop playback. 

Disconnect USB memory device from the USB terminal.

Close the terminal door.

■ Repeat play

■ Programmed play (Folder mode)

Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.

Press the FOLDER (

 or 

) to select desired folder

then press the 

 or 

 buttons to select the desired

track.

Press the MEMORY button to save the track number.

Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed.

During programmed playback, press and hold  /
button on main unit or press the CD   button to stop
programmed playback. The total number in memory will
appear.

Selected track number

XL-DAB10N 20H_001 UK.fm

The tracks can be played in random order automatically.

To random play all tracks:
Press and hold down PLAY MODE button on the remote
control. Press the  /  (USB  / ) button.

To cancel random play:
Press and hold the PLAY MODE button. “RANDOM” will
disappear.

●

During random playback, repeat function is not
possible.

●

Playback will stop after all the tracks is played
randomly.

●

If you press the 

 button during random play, you can

move to the track selected next by the random
operation. However, the 

 button does not allow you

to move to the previous track. It will go to the beginning
of the current track instead.

●

In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)

●

This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)

●

“MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3”
and MP1, MP2 format are not supported.

●

Playback order for MP3 files may differ depending on
the writing software used during file download.

●

Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.

●

For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.

●

Playlists are not supported on this unit.

●

This unit can display Folder Name or File Name up to
32 characters.

●

Maximum total number of MP3/WMA files is 65280.
Maximum total number of folders is 255 inclusive of
root directory.

●

Folders with non playable files are also counted.

●

The display playback time may not be displayed
correctly when playing back a variable bitrate file.

●

The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.

●

WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.

●

When radio interference occurs, auto scan tuning may
stop automatically at that point.

●

Auto scan tuning will skip weak signal stations.

●

Press the TUNER button to select stereo mode and
“ST” indicator will be displayed. “

” will appear when

an FM broadcast is in stereo.

●

If the FM reception is weak, press the TUNER button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.

■ Random play

■ Tuning

Press the ON/STAND-BY button to turn the power on.

Press the TUNER button go the Tuner mode.

Press the TUNING/FOLDER (

 or 

) button on the

remote control to tune in to the desired station.

●

Manual tuning:
Press the TUNING/FOLDER (

 or 

) button

repeatedly to tune in to the desired station.

●

Auto tuning:
When the TUNING/FOLDER (

 or 

) button is

pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first
receivable broadcast station.

XL-DAB10