DOWNLOAD Sharp XL-DAB20NH Service Manual ↓ Size: 9.76 MB | Pages: 28 in PDF or view online for FREE

XL-DAB10N 20H_001 UK.fm

9

9

Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
programme.

Remove the iPod, USB memory device and disc from the
unit. Then, set the unit to the power stand-by mode.
Carrying the unit with iPod or USB memory device left
docked or discs left inside might damage the unit.

Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.

●

Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.

●

Keep your discs away from direct sunlight, heat, and
excessive moisture.

●

Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the centre, along the
radius.

Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.

●

Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.

●

Do not apply oil to the inside of the unit. It may cause
malfunctions.

■ Factory reset, clearing all memory

Press the ON/STAND-BY button to enter the power
stand-by mode.

Whilst pressing down the OPEN/CLOSE button, press
the ON/STAND-BY button until “RESET” appears.

■ Before transporting the unit

■ Care of compact discs

■ Cleaning the cabinet

XL-DAB10N 20H_001 UK.fm

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.

■ General

AC 220 - 240 V ~ 50/60 Hz

Power on: 25 W
Power stand-by: 0.6 W (*)

Power on: 45 W
Power stand-by: 0.6 W (*)

Width: 155 mm (6-3/32")
Height: 178 mm (7-1/64")
Depth: 243 mm (9-9/16")

2.12 kg (4.67 lbs.)

2.12 kg (4.67 lbs.)

( * ) This power consumption value is obtained when the 

main unit is in stand-by mode without iPod charging.

■ Amplifier

MPO: 24 W (12 W + 12 W) (10% T.H.D.)
RMS: 24 W (12 W + 12 W) (10% T.H.D.)

MPO: 50 W (25 W + 25 W) (10% T.H.D.)
RMS: 50 W (25 W + 25 W) (10% T.H.D.)

Speakers: 6 ohms

Headphones: 16 - 50 ohms 
(recommended: 32 ohms)

Input terminals AUX IN (Analogue input):

500 mV/47 k ohms

■ CD player

Single disc multi-play compact disc 
player

Non-contact, 3-beam
semiconductor laser pickup

Multi bit D/A converter

20 - 20,000 Hz

90 dB (1 kHz)

■ USB

●

Complies with USB 1.1 (Full 
Speed)/ 2.0 Mass Storage Class.

●

Support Bulk only and CBI 
protocol.

●

MPEG 1 Layer 3

●

WMA (Non DRM)

●

MP3 (32 ~ 320 kbps)

●

WMA (64 ~ 160 kbps)

●

Maximum total number of MP3/
WMA files is 65280.

●

Maximum total number of folders 
is 255 INCLUSIVE of root 
directory.

●

The ID3TAG information 
supported are TITLE, ARTIST and 
ALBUM only.

●

Supports ID3TAG version 1 and 
version 2.

●

Support USB devices with 
Microsoft Windows/DOS/FAT 12/ 
FAT 16/ FAT 32.

●

2 kbyte block length for sector.

■ Tuner

Frequency range FM: 87.5 - 108 MHz

DAB: 174.928 - 239.200 MHz

■ Speaker (CP-DAB10NH) 

1-way type speaker system
10 cm (4") Full range

24 W

Rated input power 12 W

6 ohms

Width: 147 mm (5-51/64")
Height: 174 mm (6-13/16")
Depth: 171.5 mm  (6-49/64")

1.53 kg (3.37 lbs.)/each

■ Speaker (CP-DAB20NH)

2-way 2-speaker system
5 cm (2") tweeter
10 cm (4") woofer

50 W

25 W

6 ohms

Width: 132 mm (5-13/64")
Height: 260 mm (10-15/64")
Depth: 171.5 mm (6-49/64")

 1.98 kg (4.36 lbs.)/each

XL-DAB10N 20H_001 UK.fm

9

9

●

Characters are displayed in Uppercase letters (A to Z),
numbers and symbols.

●

Display examples are as in table shown below.

■ DAB Frequency table (BAND III)

174.928 MHz

5A

208.064 MHz

9D

176.640 MHz

5B

209.936 MHz

10A

178.352 MHz

5C

211.648 MHz

10B

180.064 MHz

5D

213.360 MHz

10C

181.936 MHz

6A

215.072 MHz

10D

183.648 MHz

6B

216.928 MHz

11A

185.360 MHz

6C

218.640 MHz

11B

187.072 MHz

6D

220.352 MHz

11C

188.928 MHz

7A

222.064 MHz

11D

190.640 MHz

7B

223.936 MHz

12A

192.352 MHz

7C

225.648 MHz

12B

194.064 MHz

7D

227.360 MHz

12C

195.936 MHz

8A

229.072 MHz

12D

197.648 MHz

8B

230.784 MHz

13A

199.360 MHz

8C

232.496 MHz

13B

201.072 MHz

8D

234.208 MHz

13C

202.928 MHz

9A

235.776 MHz

13D

204.640 MHz

9B

237.488 MHz

13E

206.352 MHz

9C

239.200 MHz

13F

*

Frequencies are displayed to two decimal places on 
this unit.

■ Display information table

A

}

,

.

/

\

?

[

]

I,!,:

+

=

-

B

D

G

Q

R

1

2

5

6

8

&

%

^,~

$

@

#

’

”

:

;

<,(

>,)

{

O,0

 

DISPLAY

DISPLAY

INDICATES

INDICATES

(zero)

XL-DAB10N 20H_EN_Back.fm

2010October6

92L4EDAB1003SR

10K R MW  1

4 Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 IEZ.

Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-

1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does

not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.

2. As this product is intended for private domestic use only, the guarantee will not apply if the product

is used in the course of a business, trade or profession.

3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed

Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.

4. The guarantee does not cover carriage costs, audio tapes, compact discs or batteries.

5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was

purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.

6. No person has any authority to vary the terms or conditions of this guarantee.

7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these

rights in any way.

If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.

Sharp Customer Information Centre - 

Customer support website address - www.sharp.co.uk/customersupport.aspx

Telephone 0845 880 0512

(or (01) 676 0648 if telephoning from Ireland)