Sharp XL-DAB20NH User Manual / Operation Manual ▷ View online
XL-DAB10N
H
N
0
2
B
A
D
-
L
X
H
N
0
1
B
A
D
-
L
X
XL-DAB
20
XL-DAB
10
iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
registered in the U.S. and other countries.
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
XL-DAB10NH Micro Component System consisting of XL-DAB10NH (main unit) and CP-DAB10NH (speaker system).
XL-DAB20NH Micro Component System consisting of XL-DAB20NH (main unit) and CP-DAB20NH (speaker system).
this manual carefully. It will guide you in operating your SHARP product.
XL-DAB10NH Micro Component System consisting of XL-DAB10NH (main unit) and CP-DAB10NH (speaker system).
XL-DAB20NH Micro Component System consisting of XL-DAB20NH (main unit) and CP-DAB20NH (speaker system).
OPERATION MANUAL
MODEL
XL-DAB10NH
XL-DAB20NH
XL-DAB20NH
MICRO COMPONENT SYSTEM
1
Special Notes
NOTE FOR USERS IN THE U.K. AND IRELAND:
The mains lead of this product is fitted with plug incorporating a
13A fuse. Should the fuse need to be replaced, a BSI or ASTA
approved BS 1362 fuse marked
13A fuse. Should the fuse need to be replaced, a BSI or ASTA
approved BS 1362 fuse marked
or
and of the same rating
as above, which is also indicated on the pin face of the plug must
be used.
be used.
Always refit the plug cover after replacing the fuse. Never use the
plug without the plug cover fitted.
plug without the plug cover fitted.
In the unlikely event of the socket outlet in your home not being
compatible with the plug supplied, cut-off the mains plug and fit an
appropriate type.
compatible with the plug supplied, cut-off the mains plug and fit an
appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off
plug destroyed immediately and disposed of in a safe manner.
The fuse from the cut-off plug should be removed and the cut-off
plug destroyed immediately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted
elsewhere into a 13A socket outlet as a serious electric shock may
occur.
To fit an appropriate plug to the mains lead, follow the instructions
below:
elsewhere into a 13A socket outlet as a serious electric shock may
occur.
To fit an appropriate plug to the mains lead, follow the instructions
below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the
following code:
following code:
Blue : Neutral
Brown : Live
Brown : Live
As the colours of the wires in the mains lead of this product may
not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:
not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:
●
The wire which is coloured blue must be connected to the plug
terminal which is marked N or coloured black.
terminal which is marked N or coloured black.
●
The wire which is coloured brown must be connected to the
plug terminal which is marked L or coloured red.
plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to
the earth terminal in your three pin plug.
the earth terminal in your three pin plug.
Before replacing the plug cover, make sure that:
●
If the new fitted plug contains a fuse, its value is the same as
that removed from the cut-off plug.
that removed from the cut-off plug.
●
The cord grip is clamped over the sheath of the mains lead
and not simply over the lead wires.
and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
ELECTRICIAN.
SERVICE INFORMATION
In the unlikely event of your equipment requiring repair, please
contact the dealer or supplier from whom it was purchased.
Where this is not possible, please visit our web-site www.
sharp.co.uk/ customersupport.
contact the dealer or supplier from whom it was purchased.
Where this is not possible, please visit our web-site www.
sharp.co.uk/ customersupport.
Customers without internet access may telephone 08705 274277
during office hours (or (01) 676 0648 if telephoning from lreland).
during office hours (or (01) 676 0648 if telephoning from lreland).
Please note; all calls will be charged at local rate.
Certain replacement parts and accessories may be obtained from
our main parts distributor.
our main parts distributor.
WILLOW VALE ELECTRONICS LTD.
0121 766 5414
In the unlikely event of this equipment requiring repair during the
guarantee period, you will need to provide proof of the date of
purchase to the repairing company.
guarantee period, you will need to provide proof of the date of
purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at the time
of purchase.
of purchase.
Special Notes
WARNINGS
●
When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the ON/
STAND-BY button is set at STAND-BY position, the unit may
be brought into operation by the timer mode or remote control.
mains voltage is still present inside the unit. When the ON/
STAND-BY button is set at STAND-BY position, the unit may
be brought into operation by the timer mode or remote control.
●
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains dangerous
voltages, always remove mains plug from the socket before
any service operation and when not in use for a long period.
covers unless qualified to do so. This unit contains dangerous
voltages, always remove mains plug from the socket before
any service operation and when not in use for a long period.
●
To prevent fire or shock hazard, do not expose this appliance
to dripping or splashing. No objects filled with liquids, such as
vases, shall be placed on the apparatus.
to dripping or splashing. No objects filled with liquids, such as
vases, shall be placed on the apparatus.
●
Do not turn the volume on to full at switch on. Listen to music
at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
CAUTION
●
This product is classified as a CLASS 1 LASER product.
●
This product contains a low power laser device. To ensure
continued safety do not remove any cover or attempt to gain
access to the inside of the product.
Refer all servicing to qualified personnel.
continued safety do not remove any cover or attempt to gain
access to the inside of the product.
Refer all servicing to qualified personnel.
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the
ordinary dust bin!
Used electrical and electronic equipment must be treated separately and
in accordance with legislation that requires proper treatment, recovery and
recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within
the EU states may return their used electrical and electronic equipment to
designated collection facilities free of charge*. In some countries* your
local retailer may also take back your old product free of charge if you
purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or
accumulators, please dispose of these separately beforehand according to
local requirements.
By disposing of this product correctly you will help ensure that the waste
undergoes the necessary treatment, recovery and recycling and thus
prevent potential negative effects on the environment and human health
which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned
free of charge to the dealer, even if you don't purchase a new product.
Further collection facilities are listed on the homepage of www.swico.ch or
www.sens.ch.
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the
ordinary dust bin!
Used electrical and electronic equipment must be treated separately and
in accordance with legislation that requires proper treatment, recovery and
recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within
the EU states may return their used electrical and electronic equipment to
designated collection facilities free of charge*. In some countries* your
local retailer may also take back your old product free of charge if you
purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or
accumulators, please dispose of these separately beforehand according to
local requirements.
By disposing of this product correctly you will help ensure that the waste
undergoes the necessary treatment, recovery and recycling and thus
prevent potential negative effects on the environment and human health
which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned
free of charge to the dealer, even if you don't purchase a new product.
Further collection facilities are listed on the homepage of www.swico.ch or
www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the
take-back of the product. You might be charged for the costs arising from
take-back and recycling. Small products (and small amounts) might be
taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local
authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities
and ask for the correct method of disposal.
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the
take-back of the product. You might be charged for the costs arising from
take-back and recycling. Small products (and small amounts) might be
taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local
authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities
and ask for the correct method of disposal.
Attention: Your product is
marked with this symbol.
It means that used
electrical and electronic
products should not be
mixed with general
household waste. There
is a separate collec-tion
system for these
products.
marked with this symbol.
It means that used
electrical and electronic
products should not be
mixed with general
household waste. There
is a separate collec-tion
system for these
products.
Information on Proper Disposal
Information on Battery Disposal
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries
should not be put to the general household waste! There is a
separate collection system for used batteries, to allow proper
treatment and recycling in accordance with legislation. Please
contact your local authority for details on the collection and
recycling schemes.
For Switzerland: The used battery is to be returned to the selling
point.
For other non-EU countries: Please contact your local authority for
correct method of disposal of the used battery.
For EU: The crossed-out wheeled bin implies that used batteries
should not be put to the general household waste! There is a
separate collection system for used batteries, to allow proper
treatment and recycling in accordance with legislation. Please
contact your local authority for details on the collection and
recycling schemes.
For Switzerland: The used battery is to be returned to the selling
point.
For other non-EU countries: Please contact your local authority for
correct method of disposal of the used battery.
ENGLISH
XL-DAB10N 20H_001 UK.fm
2
9
9
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
Please confirm that the following accessories are included.
The illustrations printed in this operation manual are for the model XL-DAB10NH.
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . 3 - 4
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
Setting the clock (Remote control only) . . . . . . . . . . . . . 7
iPod
Listening to the iPod . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . 10
Advanced CD or MP3/WMA disc playback . . . . . . 11 - 12
MP3/WMA folder mode
(only for MP3/WMA files) . . . . . . . . . . . . . . . . . . . 12 - 13
Page
USB
Listening to USB mass storage
device/MP3 player . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 14
Advanced USB playback . . . . . . . . . . . . . . . . . . . . 14 - 15
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . 15 - 16
Advanced Features
Using the Radio Data System (RDS) . . . . . . . . . 16 - 18
Listening to the DAB+ . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the information display . . . . . . . . . . . . . . . . 20
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 20 - 22
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 22
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . 23 - 24
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 - 26
Adaptor A x 1
(FIXED TO MAIN
UNIT)
Adaptor B x 1
Adaptor C x 1
Adaptor D x 1
Adaptor E x 1
Remote control x 1
“AAA” size battery
(UM/SUM-4, R
3, HP-16
or similar) x 2
CONTENTS
XL-DAB10N 20H_001 UK.fm
3
Precautions
●
Use the unit on a firm, level surface free from vibration.
●
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
●
Do not place anything on top of the unit.
●
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
higher than 60°C (140°F) or to extremely low
temperatures.
●
If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
●
In case of an electrical storm, unplug the unit for safety.
●
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
from the wall socket, as pulling the lead can damage
internal wires.
●
The AC power plug is used as a disconnect device and
shall always remain readily operable.
shall always remain readily operable.
●
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
in electric shock. Refer internal service to your
local SHARP service facility.
●
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
●
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
should be placed on the apparatus.
●
Attention should be drawn to the environmental
aspects of battery disposal.
aspects of battery disposal.
●
This unit should only be used within the range of 5°C -
35°C (41°F - 95°F).
35°C (41°F - 95°F).
●
The apparatus is designed for use in moderate
climates.
climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs whilst turning the unit on with the volume control
setting up high, or whilst continually listening at high
volumes. Excessive sound pressure from earphones and
headphones can cause hearing loss.
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs whilst turning the unit on with the volume control
setting up high, or whilst continually listening at high
volumes. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Controls and indicators
Page
1. iPod Docking Station. . . . . . . . . . . . . . . . . . . . . . . .8
2. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3. Timer Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . .21
4. On/Stand-by Button. . . . . . . . . . . . . . . . .6, 9, 10, 20
5. Function Button. . . . . . . . . . . . . . . . . . . .7, 9, 10, 13
6. Disc Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
7. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . .22
8. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
9. Disc / USB / iPod Play or Pause or
2. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3. Timer Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . .21
4. On/Stand-by Button. . . . . . . . . . . . . . . . .6, 9, 10, 20
5. Function Button. . . . . . . . . . . . . . . . . . . .7, 9, 10, 13
6. Disc Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
7. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . .22
8. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
9. Disc / USB / iPod Play or Pause or
Stop Button . . . . . . . . . . . . . . . . . . . . . . . . .9, 10, 13
10. Disc Tray Open / Close Button . . . . . . . . . . . . . . .10
11. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
11. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
■ General
●
Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
XL-DAB10
10 cm (4")
10 cm (4")
10 cm (4")
10 cm (4")
■ Volume control
■ Speaker system (CP-DAB10NH)
1.
Full Range
2.
Bass Reflex Duct
3.
Speaker Wire
XL-DAB10
2
3
4
5
6
7
8
9
10
11
1
1
3
2
■ Front panel
■ Speaker system (CP-DAB20NH)
1.
Tweeter
2.
Woofer
3.
Bass Reflex Duct
4.
Speaker Wire
4
3
2
1