Sharp SD-CX1 User Manual / Operation Manual ▷ View online
57
CX1H_UK49-59.fm
00/12/17
Refere
nc
es
E
rr
o
r Mes
sa
g
e
s
Error Messages
When an error message is displayed, proceed as follows:
Error messages
Meaning
Remedy
BLANK MD
Nothing is recorded. (Neither
music nor disc name is re-
corded.)
music nor disc name is re-
corded.)
Replace it with another disc.
Can't COPY
You tried to record from a
copy prohibited CD.
copy prohibited CD.
Replace the CD.
Can't EDIT
A track cannot be edited.
Change the stop position of the
track and then try editing it.
track and then try editing it.
Can't READ*
The disc is damaged.
Replace it with another disc.
(*: Number or
symbol)
symbol)
TOC information cannot be
read.
read.
Erase the disc and try recording
again.
again.
MiniDisc not specified.
Can't REC
Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.
formed correctly due to vibra-
tion or shock in the unit.
Re-record or replace the Mi-
niDisc.
niDisc.
Can't T REC
Timer recording is impossible
or there is no available space
on the MD.
or there is no available space
on the MD.
Replace it with another recorda-
ble disc.
ble disc.
The disc is out of recording
space.
space.
Can't WRITE
The TOC information could
not be created properly due to
a mechanical shock or to
scratches on the disc.
not be created properly due to
a mechanical shock or to
scratches on the disc.
Set this unit to the stand-by
mode and try to write the TOC
again. (Remove any source of
shock or vibration whilst writing.)
mode and try to write the TOC
again. (Remove any source of
shock or vibration whilst writing.)
CD NO DISC
A CD has not been loaded.
Load a CD.
The CD data cannot be read.
Reload the CD.
DISC FULL
The disc is out of recording
space.
space.
Replace the disc with another
recordable disc.
recordable disc.
EDIT OVER
You chose 21 or more tracks
for track editing.
for track editing.
Decrease the number of tracks.
Er - MD **
A MiniDisc is not working
properly.
properly.
Press the MD button.
(**: Number or
symbol)
symbol)
Set this unit to the stand-by
mode and turn the power on
again.
mode and turn the power on
again.
Error messages
Meaning
Remedy
MD NO DISC
A MiniDisc has not been load-
ed.
ed.
Load a MiniDisc.
The MiniDisc data cannot be
read.
read.
Reload the MiniDisc.
NAME FULL
The number of characters for
the disc name or track name
exceeds 40.
the disc name or track name
exceeds 40.
Shorten the disc or track name.
NOT AUDIO
The data recorded on this disc
is not audio data.
is not audio data.
Replace the disc.
PLAYBACK MD
You tried to record on a play-
back-only disc.
back-only disc.
Replace it with another recorda-
ble disc.
ble disc.
POWER ?
A MiniDisc is not working
properly.
properly.
Set this unit to the stand-by
mode and turn the power on
again.
mode and turn the power on
again.
PROTECTED
The disc is write protected.
Move the write protection tab
back to its original position.
back to its original position.
TEMP OVER
The temperature is too high.
Set this unit to the stand-by
mode and wait for a whilst.
mode and wait for a whilst.
TOC FORM **
TOC information recorded on
the MD does not match the
MiniDisc specifications or it
cannot be read.
the MD does not match the
MiniDisc specifications or it
cannot be read.
Replace it with another disc.
(**: Number or
symbol)
symbol)
Erase the disc and try recording
again.
again.
TOC FULL
There is no space left for re-
cording track numbers.
cording track numbers.
Replace it with another recorda-
ble disc.
ble disc.
TOC FULL 1
There is no space left for re-
cording character information.
cording character information.
Replace it with another recorda-
ble disc.
ble disc.
Erase the needless characters.
? MD DISC
The data contains an error.
Press the MD button.
MiniDisc not specified.
Replace it with another disc.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
58
CX1H_UK49-59.fm
00/12/17
Refere
nc
es
T
roub
le
shoot
ing Cha
rt
Troubleshooting Chart
Many potential "problems" can be resolved by the owner without calling a service
technician.
technician.
General
CD player
MiniDisc
Tuner
Remote control
Symptom
Possible cause
"TIME ADJUST" appears when the
clock time is checked.
clock time is checked.
Did a power failure occur? Reset the clock.
(Refer to page 17.)
(Refer to page 17.)
When a button is pressed, the unit
does not respond.
does not respond.
Set this unit to the power stand-by mode and
then turn it back on.
then turn it back on.
No sound is heard.
Is the volume level set to "0"?
Are the headphones connected?
Are the speaker wires disconnected?
The picture on the TV screen is dis-
torted.
torted.
When a radio or TV which uses an indoor
aerial is placed near the unit, the picture on
the TV screen may be distorted or the radio
may not function properly.
aerial is placed near the unit, the picture on
the TV screen may be distorted or the radio
may not function properly.
It is recommended that you use an external
aerial.
aerial.
Symptom
Possible cause
Even though a disc has been loaded,
"CD NO DISC" or "Can't READ" is
displayed.
"CD NO DISC" or "Can't READ" is
displayed.
The disc is very dirty.
Is the unit located near excessive vibrations?
Has condensation formed inside the unit?
Playback does not start.
The disc is loaded upside down.
Playback stops in the middle or is not
performed properly.
performed properly.
The disc does not satisfy the standards.
The disc is distorted or scratched.
Playback sounds are skipped, or
stopped in the middle of a track.
stopped in the middle of a track.
Is the unit located near excessive vibrations?
The disc is very dirty.
Has condensation formed inside the unit?
Symptom
Possible cause
A recording cannot be made.
Is the MiniDisc protected against accidental
erasure?
erasure?
Did you try to make recording on a playback-
only MiniDisc?
only MiniDisc?
Can you see the "DISC FULL" or "TOC
FULL" message in the display?
FULL" message in the display?
Even though a disc has been loaded,
"MD NO DISC" or "Can't READ" is
displayed.
"MD NO DISC" or "Can't READ" is
displayed.
The disc is very dirty.
Is the unit located near excessive vibrations?
Playback sounds are skipped.
Has condensation formed inside the unit?
Symptom
Possible cause
Radio makes unusual noise consec-
utively.
utively.
The stereo system is placed near the TV or
computer.
computer.
FM/AM loop aerial is not placed properly.
Move the AC power lead away from the aer-
ial if located near.
Move the AC power lead away from the aer-
ial if located near.
The preset channel cannot be re-
called.
called.
Did a power failure occur?
Preset the channel again.
Symptom
Possible cause
The remote control does not oper-
ate.
ate.
Is the AC power lead of the stereo system
plugged in?
plugged in?
The battery polarity is not correct.
The batteries are dead.
Incorrect distance or angle.
Does the remote control sensor receive
strong light?
strong light?
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
59
CX1H_UK49-59.fm
00/12/17
Refere
nc
es
T
roub
le
shoot
ing Cha
rt
If trouble occurs (reset)
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Unplug the power lead from the AC socket. Then, plug it in again and retry the
operation.
Unplug the power lead from the AC socket. Then, plug it in again and retry the
operation.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD or MiniDisc programme.
Condensation
Before transporting the unit
Remove the CD and MiniDisc from the unit. Your unit checks whether there are any
discs inside. "CD NO DISC" and "MD NO DISC" appear if no disc is inside. Then, set
the unit to the power stand-by mode. Carrying the unit with discs left inside can dam-
age it.
discs inside. "CD NO DISC" and "MD NO DISC" appear if no disc is inside. Then, set
the unit to the power stand-by mode. Carrying the unit with discs left inside can dam-
age it.
Sudden temperature changes, storage or
operation in an extremely humid environ-
ment may cause condensation inside the
cabinet (CD pickup, MD pickup, etc.) or on
the transmitter on the remote control.
Condensation can cause the unit to mal-
function. If this happens, leave the power on
with no disc in the unit until normal playback
is possible (about 1 hour). Wipe off any con-
densation on the transmitter with a soft cloth
before operating the unit.
operation in an extremely humid environ-
ment may cause condensation inside the
cabinet (CD pickup, MD pickup, etc.) or on
the transmitter on the remote control.
Condensation can cause the unit to mal-
function. If this happens, leave the power on
with no disc in the unit until normal playback
is possible (about 1 hour). Wipe off any con-
densation on the transmitter with a soft cloth
before operating the unit.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
60
CX1H_UK60-61.fm
00/12/18
Refere
nc
es
Ma
int
e
nance
/ S
p
ecif
ica
ti
on
s
Maintenance
Cleaning the CD pickup lens
Do not touch the CD pickup lens. If fingerprints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.
clean it gently with a dry cotton swab.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
General
Amplifier
CD player
Pickup (Lens)
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 42 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 330 mm (13")
Height: 208 mm (8-3/16")
Depth: 190 mm (7-1/2")
Height: 208 mm (8-3/16")
Depth: 190 mm (7-1/2")
Weight
5.0 kg (11 lbs.)
( * )
This power consumption value is obtained when the demonstration mode is can-
celled in the power stand-by mode. Refer to page 14 to cancel the demonstration
mode.
celled in the power stand-by mode. Refer to page 14 to cancel the demonstration
mode.
Amplification system
64fs 1-bit switching
(Remarks: fs = 44.1 kHz)
Rated output power
RMS: 40 W (20 W + 20 W) (DIN 45 324)
A/D noise shaping
7th-order (delta - sigma) modulation
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Auxiliary: 500 mV/47 kohms
Type
1-disc vertical compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-CX1 service manuals if exist.