Sharp SD-CX1 User Manual / Operation Manual ▷ View online
45
CX1H_UK42-48.fm
00/12/17
M
D
Editi
n
g
E
d
it
in
g
a Rec
o
rd
ed M
iniDisc
To combine tracks
Notes:
First, put the two tracks next to each other in the order you want using the MOVE
function. Then combine them using the COMBINE function.
function. Then combine them using the COMBINE function.
This function cannot be used in the random play mode and programmed play
mode.
mode.
If both tracks to be combined have a name, or only the first track has a name, the
first track name will be used.
first track name will be used.
When the first track does not have a name, the combined track will be named as
follows.
follows.
In the following cases, tracks may not be combined.
Digital recorded track and analogue recorded track.
Tracks recorded in different recording modes (monaural, stereo, 2 times long
recording, 4 times long recording) cannot be combined.
recording, 4 times long recording) cannot be combined.
Short tracks may not be combined (8 seconds for stereo, 16 seconds for monaural
and 2 times long recording, 32 seconds for 4 times long recording).
and 2 times long recording, 32 seconds for 4 times long recording).
1
Whilst in the stop mode, select the second of the two adjacent
tracks you want to combine by pressing the
tracks you want to combine by pressing the
or
button. Or
start playing the second of the two tracks you want to combine,
and then press the MD
and then press the MD
button.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select
"COMBINE" by pressing the REC LEVEL/CURSOR or button.
"COMBINE" by pressing the REC LEVEL/CURSOR or button.
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the NAME/TOC EDIT button.
4
Press the ENTER button again.
The two tracks are combined, and the unit is stopped at the beginning of the com-
bined track.
bined track.
The numbers assigned to the tracks following the combined track are automati-
cally decreased by one.
cally decreased by one.
The second track name will be used for tracks recorded in monaural or stereo.
No name will be given to tracks recorded in 2 times or 4 times long recording mode.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
46
CX1H_UK42-48.fm
00/12/17
M
D
Editi
n
g
E
d
it
in
g
a Rec
o
rd
ed M
iniDisc
Editing a Recorded MiniDisc (continued)
To move a track
1
Whilst in the stop mode, select the track you want to move by
pressing the
pressing the
or
button. Or start playing the track to be
moved, and then press the MD
button.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select
"MOVE" by pressing the REC LEVEL/CURSOR or button.
"MOVE" by pressing the REC LEVEL/CURSOR or button.
3
Within 10 seconds, press the ENTER button.
4
Select the new track position by pressing the
or
button.
To cancel the operation, press the NAME/TOC EDIT button.
5
Press the ENTER button again.
The track is moved, and the unit is stopped at the beginning of the track selected
in step 4.
in step 4.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
47
CX1H_UK42-48.fm
00/12/17
M
D
Editi
n
g
E
d
it
in
g
a Rec
o
rd
ed M
iniDisc
To move the programmed tracks
Note:
If a track is programmed twice or more, the first instruction will precede to the oth-
ers.
ers.
To erase one track
Caution:
Once a track has been erased, it cannot be recovered. Check the track number
before erasing it.
Once a track has been erased, it cannot be recovered. Check the track number
before erasing it.
Notes:
When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.
track will be automatically decreased by one.
When a track is erased, the track name will be erased at the same time.
It is also possible to erase tracks by selecting either menu of "ERASE" or "ALL
ERASE" with the NAME/TOC EDIT button on the remote control.
ERASE" with the NAME/TOC EDIT button on the remote control.
1
Programme the tracks you want to move. (See page 25.)
2
Press the NAME/TOC EDIT button.
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the NAME/TOC EDIT button.
4
Press the ENTER button again.
Tracks are rearranged.
The programmed tracks will come to the top of the disc.
1
Whilst in the stop mode, select the track you want to erase by
pressing the
pressing the
or
button. Or start playing the track to be
erased, and then press the MD
button to enter the pause mode.
2
Press the ERASE button.
To cancel the operation, press the MD button.
3
Press the ERASE button for 2 seconds or more.
The track is erased, and the unit is stopped at the beginning of the next track.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
48
CX1H_UK42-48.fm
00/12/17
M
D
Editi
n
g
E
d
it
in
g
a Rec
o
rd
ed M
iniDisc
Editing a Recorded MiniDisc (continued)
To erase all the tracks at once
To erase the programmed tracks at once
1
Press the MD button.
2
Press the ERASE button.
To cancel the operation, press the MD button.
3
Press the ERASE button for 3 seconds or more.
All the track numbers and track names are erased.
1
Programme the tracks you want to erase. (See page 25.)
Up to 20 tracks can be programmed.
2
Press the NAME/TOC EDIT button on the remote control.
3
Within 10 seconds, press the REC LEVEL/CURSOR or button
on the remote control to select the "PRGM ERASE".
on the remote control to select the "PRGM ERASE".
4
Within 10 seconds, press the ENTER button on the remote control.
To cancel the operation, press the MD button.
5
Press the ENTER button on the remote control.
The programmed tracks are erased.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-CX1 service manuals if exist.