Sharp SD-CX1 User Manual / Operation Manual ▷ View online
25
CX1H_UK17-25.fm
00/12/17
Ad
v
a
nce
d
CD
/MD Pla
y
ba
c
k
P
rog
ra
mme
d
p
la
y
Programmed Play
Up to 20 CD tracks or 20 MD tracks can be programmed.
You cannot programme CD and MiniDisc tracks together at the same time.
You cannot programme CD and MiniDisc tracks together at the same time.
To clear the programmed selections:
Press the CLEAR button whilst the "PROGRAM" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last
track programmed.
track programmed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR button. The "PROGRAM" indicator will dis-
appear and all the programmed content will be cleared.
Whilst in the stop mode, press the CLEAR button. The "PROGRAM" indicator will dis-
appear and all the programmed content will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "PROGRAM" indicator will be dis-
played. Then follow steps 1 - 5 to add tracks. The new tracks will be stored after the
last track of the original programme.
If a programme has been previously stored, the "PROGRAM" indicator will be dis-
played. Then follow steps 1 - 5 to add tracks. The new tracks will be stored after the
last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
Whilst the unit is stopped in the programmed play mode, press the
or
button.
Notes:
Ejecting a CD or MiniDisc automatically cancels the programmed sequence.
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD or MD to another function, the programmed selections will
not be cleared.
the function from CD or MD to another function, the programmed selections will
not be cleared.
During programme operation, random play is not possible.
1
Whilst in the stop mode, press the CD or MD button.
2
Press the PROGRAM button to enter the programming save mode.
3
Press the direct buttons to select the desired track.
4
Repeat step 3 for any other track. Up to 20 tracks can be pro-
grammed.
grammed.
If the total programmed playback time exceeds 400 minutes, "--:--" is displayed.
However, it is properly memorised.
However, it is properly memorised.
5
Press the CD or MD button.
6
Press the CD
or MD
button to start playback.
Playback order
Playback time
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
26
CX1H_UK26-34.fm
00/12/17
Radio
Liste
n
in
g t
o
the
R
a
dio
Listening to the Radio
Tuning
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM STEREO, FM or AM).
frequency band (FM STEREO, FM or AM).
3
Press the TUNING or button to tune in to the desired station.
Manual tuning:
Press the TUNING or button as many times as required to tune in to the
desired station.
desired station.
Auto tuning:
When the TUNING or button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable broad-
cast station.
ning will start automatically and the tuner will stop at the first receivable broad-
cast station.
You can tune in to the desired station by pressing the
or
button on the
remote control.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at that
point.
point.
Auto scan tuning will skip weak signal stations.
When an RDS (Radio Data System) station is tuned in, the frequency will be dis-
played first, and then the RDS indicator will light. Finally, the station name will ap-
pear.
played first, and then the RDS indicator will light. Finally, the station name will ap-
pear.
Full auto tuning can be achieved for RDS stations "ASPM", see page 30.
4
To receive an FM stereo transmission, press the TUNER (BAND)
button. The "STEREO" indicator lights up.
button. The "STEREO" indicator lights up.
"ST" will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button. The "STEREO" in-
dicator goes out. The reception changes to monaural, and the sound becomes
clearer.
dicator goes out. The reception changes to monaural, and the sound becomes
clearer.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
27
CX1H_UK26-34.fm
00/12/17
Radio
Liste
n
in
g t
o
the
R
a
dio
Preset tuning
(Remote control operation)
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton.
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
To recall a memorised station
(Remote control operation)
Press the TUN. PRESET or button to select the desired station.
Press the TUN. PRESET or button to select the desired station.
The direct buttons allow you to recall a memorised station.
To select a preset station between the 11 and 40:
For example, to choose 28
To erase all the contents of the preset
memory
memory
(Remote control operation)
1
Perform steps 1 - 4 in the "Tuning" section on page 26.
2
Press the ENTER button to enter the preset tuning saving mode.
3
Within 5 seconds, press the TUN. PRESET or button to select
the preset channel number.
the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the ENTER button to store that station in
memory.
memory.
If the preset number indicator goes out before the station is memorised, repeat
the operation from step 2.
the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
tion.
When a new station is stored in memory, the station previously memorised will be
erased.
erased.
1 Press the " 10" button.
2 Press the "2" button.
3 Press the "8" button.
1 Press the TUNER (BAND) button.
2 Hold the CLEAR button down for 3 seconds
or more.
3 Press the ENTER button.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
28
CX1H_UK26-34.fm
00/12/17
RDS Ra
dio
Using the Ra
dio Data S
y
s
te
m
(RDS)
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM stations provide.
These FM stations send additional signals along with their regular programme
signals. They send their station names, and information about the type of pro-
gramme such as sports or music, etc.
When tuned to an RDS station, "RDS" and the station name will be displayed.
"TP" (Traffic Programme) will appear on the display when the received broadcast car-
ries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic
information is on air (see page 34).
"EON" will appear whilst the EON (Enhanced Other Networks information) data is
broadcast.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received.
You can control the RDS by using the remote control only.
These FM stations send additional signals along with their regular programme
signals. They send their station names, and information about the type of pro-
gramme such as sports or music, etc.
When tuned to an RDS station, "RDS" and the station name will be displayed.
"TP" (Traffic Programme) will appear on the display when the received broadcast car-
ries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic
information is on air (see page 34).
"EON" will appear whilst the EON (Enhanced Other Networks information) data is
broadcast.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received.
You can control the RDS by using the remote control only.
Information provided by RDS
When you are tuning in to a station other than an RDS station or to an RDS station
which sends weak signal, the display will change in the following order:
which sends weak signal, the display will change in the following order:
Each time the DISPLAY button is pressed, the display will switch as follows:
Frequency
Level meter
Station name (PS)
Frequency
Level meter
Programme type
(PTY)
(English fixed)
(PTY)
(English fixed)
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-CX1 service manuals if exist.