Sharp SD-CX1 User Manual / Operation Manual ▷ View online
13
CX1H_UK11-16.fm
00/12/17
Pre
p
ar
at
ion
f
o
r U
s
e
S
y
s
te
m
Connections
Aerial connection
Supplied FM aerial:
Supplied AM loop aerial:
Note:
Placing the aerial on the stereo system or near the AC power lead and speaker wires
may cause noise pickup. Place the aerial away from the stereo system for better
reception.
Placing the aerial on the stereo system or near the AC power lead and speaker wires
may cause noise pickup. Place the aerial away from the stereo system for better
reception.
Installing the AM loop aerial:
External FM or AM aerial
Use an external FM or AM aerial if you require better reception. Consult your dealer.
Notes:
When an external FM aerial is used, disconnect the supplied FM aerial wire from the FM
75 OHMS socket.
75 OHMS socket.
When using an external AM aerial, be sure to keep the wire of the AM loop aerial con-
nected.
nected.
Speaker connection
Connect the wire with the black line to the (-) and transparent one to the (+) .
Caution:
Connect the speaker wires to the speakers first, then to the unit.
Use speakers with an impedance of 6 ohms or more, as lower impedance speak-
ers can damage the unit.
ers can damage the unit.
Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not stand or sit on the speakers. You may be injured.
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Connect the AM loop aerial wire to
the AM and GND terminals. Position
the AM loop aerial for optimum re-
ception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or
a wall with screws (not supplied).
the AM and GND terminals. Position
the AM loop aerial for optimum re-
ception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or
a wall with screws (not supplied).
< Assembling >
< Attaching to the wall >
White
Black
Wall
Screws
AM loop aerial
15 m (49 feet)
7.5 m
(25 feet)
External AM aerial
Earth rod
External FM aerial
2
1
3
Left speaker
Clear
Black line
Right speaker
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
14
CX1H_UK11-16.fm
00/12/17
Pre
p
ar
at
ion
f
o
r U
s
e
S
y
s
te
m
Connections
System Connections (continued)
To mount the speakers on the wall
The design of the speakers allows them to be hung on the wall. Be sure to use the type and
size of screw that is shown below.
size of screw that is shown below.
1
Make a hole in the wall using a drill.
2
Drive a wall mount plug into the hole using a hammer. Drive the
wall mount plug in until it is flush with the wall surface.
wall mount plug in until it is flush with the wall surface.
3
Drive one screw into the wall for each speaker as shown in the
illustration.
illustration.
Drive the screws, so there is about a 5 mm (3/16") space between the wall and the
head of the screw.
head of the screw.
4
Mount the speaker on the wall so that the screw head is inserted
into the slot on the speaker.
into the slot on the speaker.
How to apply non-slip sheets
Connecting the AC power lead
After checking all the connections have been made correctly, plug the unit into the
mains. If you plug the unit first, the unit will enter the demonstration mode.
mains. If you plug the unit first, the unit will enter the demonstration mode.
Note:
Unplug the unit if it will not be used for a prolonged period of time.
Unplug the unit if it will not be used for a prolonged period of time.
Demonstration mode
The first time the unit is plugged in, the unit will enter the demonstration mode. You
will see words scroll.
will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the AUX
(DEMO) button. The unit will enter the low power consumption mode.
When the unit is in the power stand-by mode (demonstration mode), press the AUX
(DEMO) button. The unit will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the AUX (DEMO) button again.
When the unit is in the power stand-by mode, press the AUX (DEMO) button again.
32 mm
(1-1/4")
(1-1/4")
8-9 mm (3/8")
3.2 mm (1/8")
9 mm (3/8")
5 mm
(3/16")
(3/16")
Min.22 mm (7/8")
Wall surface
Wall mounting screw
Wall surface
Adhere the non-slip sheets to the
bottom of the speaker.
bottom of the speaker.
Adhere the non-slip sheets on the
lower back of the speaker, and then
mount it to the wall.
lower back of the speaker, and then
mount it to the wall.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
15
CX1H_UK11-16.fm
00/12/17
Ba
sic Oper
ation
Gener
a
l Contr
o
l
General Control
You can select and change to the colour
you like from 7 different colours.
you like from 7 different colours.
To change the display illumination bright-
ness
ness
To dim:
To brighten:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DISPLAY button for 2 seconds or more.
3
Press the REC LEVEL/CURSOR or button to select "COLOR".
4
Press the ENTER button.
5
Press the REC LEVEL/CURSOR or button.
INITIAL
The colour changes automatically along with the operation.
FIXED
You can select a colour you like.
DAILY
The colour changes according to the day of the week.
RANDOM
The colour changes at random.
6
Press the ENTER button.
7
When FIXED or DAILY is selected:
Press ENTER button after selecting your favourite colour with the REC LEV-
EL/CURSOR
EL/CURSOR
or
button.
You can select the colour you like from 7 colours (COLOR 1 to COLOR 7).
1
Press the ON/STAND-BY button to turn the power on.
2
Hold the DISPLAY button down for 2 seconds or more.
3
Press the REC LEVEL/CURSOR or button to select "DIMMER ON ?".
4
Press the ENTER button.
The light goes out and characters are dimmed.
1
Hold the DISPLAY button down for 2 seconds or more.
2
Press the ENTER button.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
16
CX1H_UK11-16.fm
00/12/17
Ba
sic Oper
ation
Soun
d Con
tr
o
l
Sound Control
Volume control
Press the VOLUME button to increase the volume and the VOLUME button for
decreasing.
decreasing.
Bass control
When the X-BASS button is pressed, the unit will enter the extra bass mode which
emphasises the bass frequencies. To cancel the extra bass mode, press the X-BASS
button.
emphasises the bass frequencies. To cancel the extra bass mode, press the X-BASS
button.
Surround
Press the SURROUND button to allow you to enjoy music that seems to surround you.
"SURROUND" will appear.
Press the SURROUND button again to cancel the surround mode.
"SURROUND" will go out.
"SURROUND" will appear.
Press the SURROUND button again to cancel the surround mode.
"SURROUND" will go out.
Equalizer
Press the PASS/EQ button repeatedly until the desired sound mode appears.
Bass is emphasised.
Cancelled.
Bass and treble are emphasised.
The sound is not modified.
Vocals (midrange tones)
are emphasised.
Treble is reduced.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-CX1 service manuals if exist.