Sharp SD-CX1 User Manual / Operation Manual ▷ View online
17
CX1H_UK17-25.fm
00/12/17
Ba
sic Oper
ation
Setting t
h
e
Cloc
k
Setting the Clock
In this example, the clock is set for 9:30 15. 02 '01 .
To confirm the time display:
[When the unit is in the stand-by mode]
[When the unit is in the stand-by mode]
Press the DISPLAY button on the remote control.
The time display will appear for about 5 seconds.
The time display will appear for about 5 seconds.
[When the power is on]
Press the TIMER/DELETE button.
Within 10 seconds, press the REC LEVEL/CURSOR or button.
The time display will appear for about 10 seconds.
Note:
The clock setting will be cleared when the unit is unplugged or the power failure
occurs.
Within 10 seconds, press the REC LEVEL/CURSOR or button.
The time display will appear for about 10 seconds.
Note:
The clock setting will be cleared when the unit is unplugged or the power failure
occurs.
To reset the clock:
Perform "Setting the Clock" from the beginning.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR or button to
select the "TIME ADJUST".
select the "TIME ADJUST".
4
Within 10 seconds, press the ENTER button.
5
Press the REC LEVEL/CURSOR or button to adjust the year,
and then press the ENTER button.
and then press the ENTER button.
6
Press the REC LEVEL/CURSOR or button to adjust the month,
and then press the ENTER button.
and then press the ENTER button.
7
Press the REC LEVEL/CURSOR or button to adjust the date,
and then press the ENTER button.
and then press the ENTER button.
8
Press the REC LEVEL/CURSOR or button to adjust the hour,
and then press the ENTER button.
and then press the ENTER button.
9
Press the REC LEVEL/CURSOR or button to adjust the minutes,
and then press the ENTER button.
and then press the ENTER button.
The hour will not advance even if minutes advance from "59" to "00".
The clock starts from "0" second. (Seconds are not displayed.) The time display
will disappear after a few seconds.
will disappear after a few seconds.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
18
CX1H_UK17-25.fm
00/12/17
C
D
P
lay
b
a
ck
List
ening t
o
a
CD
Listening to a CD
To interrupt playback:
Press the CD
button.
To resume playback from the same point, press the CD
button again.
To stop playback:
Press the CD button.
Press the CD button.
Load a CD firmly with the
label side facing toward you.
label side facing toward you.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the CD button to open the CD cover.
4
Set a CD and press the CD button.
Total number of tracks Total playing time
5
Press the CD
button to start playback.
When the last track has finished playing, the CD player will stop automatically.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
19
CX1H_UK17-25.fm
00/12/17
C
D
P
lay
b
a
ck
List
ening t
o
a
CD
To remove the CD:
Whilst in the stop mode, press the CD button.
Press the CD eject button and remove the CD.
Whilst in the stop mode, press the CD button.
Press the CD eject button and remove the CD.
After use:
Press the CD button and close the CD cover.
When the unit enters the stand-by mode, the opened CD cover will be closed auto-
matically.
matically.
Caution:
Be careful not to jam your fingers with the CD cover when opening and clos-
ing it.
ing it.
Do not stop or move the CD cover manually. It may cause malfunctions to
the unit.
the unit.
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may cause mistracking.
When the unit is not being used, be sure to close the CD cover. If it is left open, the
lens may be covered with dust and the unit may not function properly.
lens may be covered with dust and the unit may not function properly.
Playing certain compact discs at a high volume may cause mistracking. In this
case, listen at a lower volume.
case, listen at a lower volume.
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
the TV or radio.
If an error message is displayed during CD operation, see "Error Messages" on
page 57.
page 57.
To locate the beginning of a track
To locate the desired portion
Notes:
Normal playback will resume when the
or
button is released.
When the end of the last track is reached during fast forward, "END" will appear in
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
CD Eject Button
To move to the beginning of the next track:
Press the
button during playback.
You can skip to any track by pressing the
button repeatedly until the desired
track number appears.
To restart the track being played:
Press the
button during playback.
You can skip to any track by pressing the
button repeatedly until the desired
track number appears.
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
20
CX1H_UK17-25.fm
00/12/17
C
D
P
lay
b
a
ck
List
ening t
o
a
CD
Listening to a CD (continued)
Switching the time display
Each time the TIME button on the remote control is pressed during playback, the dis-
play will change.
play will change.
Notes:
During random play, the total remaining playing time will not be displayed.
Depending on the CD, the playing time display may not match the total playing
time which is indicated on the CD jacket, as the time between tracks is not
included.
time which is indicated on the CD jacket, as the time between tracks is not
included.
Switching to the level meter
Each time the DISPLAY button on the remote control is pressed during playback, the
display will change.
display will change.
The elapsed playing time for the current
track will be displayed.
track will be displayed.
The remaining playing time for the current
track will be displayed.
track will be displayed.
The total remaining playing time for the disc
will be displayed.
will be displayed.
The elapsed playing time for the current track will be displayed.
The level meter will be displayed.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-CX1 service manuals if exist.