Sharp SD-CX1 User Manual / Operation Manual ▷ View online
37
CX1H_UK35-41.fm
00/12/17
MD Reco
rd
ing
R
ecor
d
in
g t
o
a
MiniDi
sc
fr
o
m
a
CD
Note:
Recording from a CD to a MiniDisc starts even if all the tracks on the CD cannot fit
in the MiniDisc. In that case, both the CD and MD stop when the MD becomes full.
in the MiniDisc. In that case, both the CD and MD stop when the MD becomes full.
When the CD reaches its end, recording to MD will stop simultaneously.
You can record from a CD you programmed.
Recording can be performed in repeat playback mode. The repeat playback can
be switched during recording.
be switched during recording.
To stop recording:
Press the CD or MD button.
The CD and MiniDisc will stop.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Press the ON/STAND-BY button to enter the power stand-by mode.
Notes for long recording mode:
Tracks recorded in 2 times long recording or 4 times long recording mode cannot
be played with units that do not support these modes.
be played with units that do not support these modes.
On such a unit, "LP :" is displayed at the beginning of the track and no sound is
heard. (The operation and the display may vary depending on the unit.)
heard. (The operation and the display may vary depending on the unit.)
Note for high speed recording:
Due to the scratch, dirt, or the recorded condition, the sound may be cut in pieces or
the noise is heard from the MD recorded in high speed. If this occurs, record the MD
at the normal speed.
Due to the scratch, dirt, or the recorded condition, the sound may be cut in pieces or
the noise is heard from the MD recorded in high speed. If this occurs, record the MD
at the normal speed.
Caution for 4 times long recording (LP4):
Special compressing method allows the 4 times long recording to realize long-time
stereo recording. Therefore, some noise is recorded occasionally.
If sound quality is the main requirement, stereo recording or 2 times long recording is
recommended.
Special compressing method allows the 4 times long recording to realize long-time
stereo recording. Therefore, some noise is recorded occasionally.
If sound quality is the main requirement, stereo recording or 2 times long recording is
recommended.
About track numbers:
New track numbers will be created auto-
matically according to the original tracks
(Synchro mark function).
matically according to the original tracks
(Synchro mark function).
When you record from a CD to a Mi-
niDisc, the track numbers recorded on
the MiniDisc may not match the track
numbers on the CD.
niDisc, the track numbers recorded on
the MiniDisc may not match the track
numbers on the CD.
Track A
First track
Third track
Second track
First track
MiniDisc
CD
Third track
Second track
Track B
Track C
Track A
Track B
Track C
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
38
CX1H_UK35-41.fm
00/12/17
MD Reco
rd
ing
R
ecor
d
in
g t
o
a
MiniDi
sc
fr
o
m
a
CD
Recording to a MiniDisc from a CD (continued)
Recording the desired tracks of the CD
When the recording is finished, the selected tracks will be cleared.
To memorise a track whilst listening to it:
To memorise a track whilst listening to it:
To clear the memorised tracks:
Press the CD button whilst in the stop mode.
Press the CD button whilst in the stop mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button and load the desired CD.
3
Load a recordable MiniDisc into the MD compartment.
4
Press the
or
button to select the desired track.
5
Press the TRACK button to programme the track number.
Selected track number T-EDIT
6
Repeat steps 4 - 5 for other tracks. Up to 20 tracks can be pro-
grammed.
grammed.
If more than 20 tracks are selected, "EDIT OVER" is displayed and the 21st track
will not be memorised.
will not be memorised.
7
Press the CD MD EDIT (HIGH/NORMAL) button to start record-
ing.
ing.
1
When you hear a track you want to record during playback, press the TRACK
button.
button.
The track is memorised. (Maximum 20 tracks can be memorised.)
2
After the track is memorised, press the CD button to stop playback.
3
Press the HIGH or NORMAL button to start recording.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
39
CX1H_UK35-41.fm
00/12/17
MD Reco
rd
ing
R
ecor
d
in
g t
o
a
MiniDi
sc
fr
o
m
a
CD
Recording on the top position of a
recorded MiniDisc
recorded MiniDisc
When the recording is finished, the top position mode will be cancelled.
The recorded track will be the first track on the MiniDisc.
All the tracks previously recorded will be renumbered.
Note:
The recorded track will be the first track on the MiniDisc.
All the tracks previously recorded will be renumbered.
Note:
Whilst in the pause mode or recording, the top position mode cannot be set or
cancelled.
cancelled.
Adjusting the recording level
You can adjust the recording level depending on the recording source by watching the
level meter.
level meter.
To stop recording:
Press the MD button.
The MiniDisc will stop.
The CD will continue playback.
The MiniDisc will stop.
The CD will continue playback.
1
Prepare for recording.
To record from a CD:
To record from the radio:
Load the desired CD and a recordable
MiniDisc.
MiniDisc.
Tune in to the desired station and load
a recordable MiniDisc.
a recordable MiniDisc.
2
Press the TOP POSITION button.
One more press will cancel the top position mode.
3
Start recording.
To record from a CD:
To record from the radio:
Press the HIGH or NORMAL button.
Press the MD
button after pressing
the REC button.
1
Press the CD button.
2
Press the
or
button to select the desired track.
3
Press the REC MODE button to select the recording mode.
4
Press the CD
button to start playback.
5
Press the REC button to pause recording.
6
Press the REC LEVEL/CURSOR or button to adjust the record-
ing level.
ing level.
Level meter
Recording level
Maximum level should not exceed "0dB".
The recording level can be adjusted in 2dB intervals between -4dB and +10dB.
7
Press the CD button.
8
Press the
or
button again to select the desired track to be
recorded.
9
Press the CD
button again to start recording.
0dB
-4dB ··· +10dB
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
40
CX1H_UK35-41.fm
00/12/17
MD Reco
rd
ing
Recor
d
ing
t
o
a
MiniD
isc
fr
om t
h
e
Radio
Recording to a MiniDisc from the Radio
To interrupt recording:
Press the MD
Press the MD
button.
To resume recording from the same point of MiniDisc, press the MD
button again.
To stop recording:
Press the MD button.
The MiniDisc will stop.
To mark track numbers whilst recording from the radio:
Press the REC button at the desired position during recording to create a new track
number. The track counter will be increased by one every time the button is pressed.
Press the REC button at the desired position during recording to create a new track
number. The track counter will be increased by one every time the button is pressed.
1
Tune in to the desired station. (See page 26.)
2
Load a recordable MiniDisc into the MD compartment.
3
Press the REC MODE button to select the recording mode.
4
Press the REC button.
The unit will enter the recording stand-by mode.
5
Press the MD
button to start recording.
About track numbers:
A recording is performed as a single track,
and only one number is created.
and only one number is created.
Track A
Single track
First track
MiniDisc
Radio
Third track
Second track
Track B
Track C
(Track A)
(Track B)
(Track C)
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other SD-CX1 service manuals if exist.