Sharp HT-CN410DVH User Manual / Operation Manual ▷ View online
E-46
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
Advanced Features
- Enjoying various sounds -
Dolby Pro Logic Surround
You can produce 2-channel stereo signals on audio CD, video CD, or AUX from all the
speakers, or switch to 2-channel.
speakers, or switch to 2-channel.
Speaker indicators:
Speaker indicators show speakers in use.
Notes:
You can switch the audio whilst playing the disc of multiple types (Dolby Digital,
DTS, etc.) (page 33).
When the listening mode is set to stereo, the same monaural sound is reproduced
in both the right and left channels.
DTS, etc.) (page 33).
When the listening mode is set to stereo, the same monaural sound is reproduced
in both the right and left channels.
The surround function is disabled in the tuner mode (FM or AM).
To Change The Sound Effect (Equaliser)
Whilst a disc is playing, press the LISTENING button repeatedly to
select the desired listening mode.
Dolby Pro Logic
surround:
Unit display
TV screen
2-ch stereo sound:
When using AUX, the information does not appear on the TV screen.
Dolby Pro Logic surround:
You can produce sound from all the speakers.
You can produce sound from all the speakers.
2-ch stereo sound:
Enjoy 2-channel stereo sound.
Enjoy 2-channel stereo sound.
Left Front Speaker Indicator
Centre Speaker Indicator
Right Front Speaker Indicator
Left Surround Speaker Indicator
Subwoofer Indicator
Right Surround Speaker Indicator
Centre Speaker Indicator
Right Front Speaker Indicator
Left Surround Speaker Indicator
Subwoofer Indicator
Right Surround Speaker Indicator
PRO LOGIC
PL II
R
L
RS
LS
C
S
PL II
STEREO
STEREO
S
STEREO
STEREO
R
L
S
STEREO
Front speaker (left)
Subwoofer
Front speaker (right)
Surround
speaker (left)
speaker (left)
Surround
speaker (right)
speaker (right)
Centre speaker
Front speaker (left)
Subwoofer
Front speaker (right)
1
2
3
4
5
6
You can change the sound effect (Equaliser), press EQ button repeatedly to cyclicity
select the preset equaliser mode: JAZZ → USER SET → CLASSIC → POP → ROCK.
The display will show as below.
select the preset equaliser mode: JAZZ → USER SET → CLASSIC → POP → ROCK.
The display will show as below.
CHP
TITLE
R
L
RS
LS
C
S
R O C K
CHP
TITLE
R
L
RS
LS
C
S
P O P
CHP
TITLE
R
L
RS
LS
C
S
C L A S S I C
CHP
TITLE
R
L
RS
LS
C
S
U S E R
S E T
CHP
TITLE
R
L
RS
LS
C
S
J A Z Z
CHP
TITLE
R
L
RS
LS
C
S
1 6
0 3 8
1 8
:
STEREO
DIGITAL
Pro Logic
Pro Logic
R
L
RS
LS
C
S
1
2
3
4
5
6
E-47
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
HT-CN410DVH
Advanced Features
- Adjusting speaker delay time/speaker level -
Adjusting speaker delay time/speaker level
When speakers cannot be placed at equal distances, change speaker settings to
enjoy surround effects as if they were equally placed.
enjoy surround effects as if they were equally placed.
Example:
If the centre speaker is closer to the listening position than others by about 90 cm, set
as follows.
as follows.
Speaker delay time setting
By adjusting speaker delay time, differences in the speaker distance can be corrected.
This offers you the sound quality as if the speakers are installed at the same distance
from the listening position.
This offers you the sound quality as if the speakers are installed at the same distance
from the listening position.
Notes:
When the listening mode is "STEREO", the delay time cannot be changed.
You cannot change the delay time of the front speakers and the subwoofer.
In the "REAR DELAY" setting, the left and right speakers are adjusted at the same
time, not individually.
You cannot change the delay time of the front speakers and the subwoofer.
In the "REAR DELAY" setting, the left and right speakers are adjusted at the same
time, not individually.
Sound from the centre speaker needs to be delayed for 90 cm. The delay time of 1
ms corresponds to 30 cm. Set the delay time to 3 MS. Sound is heard as if all the
speakers were equally placed.
ms corresponds to 30 cm. Set the delay time to 3 MS. Sound is heard as if all the
speakers were equally placed.
1 In "Speaker delay time setting", set the centre speaker to 3 MS.
2 The centre speaker is closer to the listener than others. In "Speaker level setting",
2 The centre speaker is closer to the listener than others. In "Speaker level setting",
adjust the centre speaker level (see page 48).
3 In "Test tone", check the sound from each speaker (see page 48).
110 cm
200 cm
0
90 cm
Front
speaker (left)
Subwoofer
Front
speaker (right)
speaker (right)
Surround
speaker (left)
speaker (left)
Surround
speaker (right)
speaker (right)
Centre
speaker
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the SETUP button.
4
Press the
8
or
9
button to select
"SPEAKER SETUP" and then
press the ENTER button.
5
Press the
8
or
9
button to select
"CENTER DELAY" or "REAR
DELAY".
6
Press the
:
button and use the
8
or
9
button to select the desired
delay time.
7
To complete the speaker delay time setting, press the SETUP
button.
button.
Speaker type
Delay time range
Default
setting
CENTER DELAY
Centre speaker
1 MS to 5 MS
OFF
REAR DELAY
Surround speaker (L, R)
3 MS to 15 MS
OFF
E-48
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
Advanced Features
- Adjusting speaker delay time/speaker level -
Test tone
You can check the sound output from the speakers.
Note:
When the listening mode is "STEREO", only the front speakers can be checked.
Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
speaker levels.
Notes:
The speaker type appears followed by "TREBLE", "BASS" and "MASTER
VOLUME".
For details on "TREBLE" and "BASS", see page 24.
The volume can still be adjusted even after "MASTER VOLUME" disappears.
When the listening mode is "STEREO", you can change the level of the front
speakers and the subwoofer.
If subwoofer sound is distorted, lower the subwoofer level.
VOLUME".
For details on "TREBLE" and "BASS", see page 24.
The volume can still be adjusted even after "MASTER VOLUME" disappears.
When the listening mode is "STEREO", you can change the level of the front
speakers and the subwoofer.
If subwoofer sound is distorted, lower the subwoofer level.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the SETUP button.
4
Press the
8
or
9
button to select
"SPEAKER SETUP" and then
press the ENTER button.
5
Press the
8
or
9
button to select
"TEST TONE".
6
Press the
-
button and use the
8
or
9
button to select "ON".
7
Press the ENTER button.
Speakers emit the test tone for 2 seconds in turn, starting with the front speaker
(left).
(left).
8
To end the test tone, press the SETUP button.
Subwoofer
Front speaker (left)
Front speaker (right)
Surround speaker (right)
Surround speaker (left)
Centre speaker
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the MODE button repeatedly to select the desired speaker.
4
Within 3 seconds, press the VOLUME +,
or VOLUME − button to adjust the level.
You can adjust the level at 1 dB intervals.
To adjust the levels of other speakers, repeat the operation from step 3.
Speaker type
Level range
Default
setting
FRONT LEFT
Front speaker (Left)
- 10 DB to + 10 DB
0 DB
CENTER
Centre speaker
- 10 DB to + 10 DB
0 DB
FRONT RIGHT
Front speaker (Right)
- 10 DB to + 10 DB
0 DB
REAR LEFT
Surround speaker (Left)
- 10 DB to + 10 DB
0 DB
REAR RIGHT
Surround speaker (Right)
- 10 DB to + 10 DB
0 DB
SUBWOOFER
Subwoofer
- 10 DB to + 10 DB
0 DB
CNT
3DB
E-49
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
HT-CN410DVH
Advanced Features
- Sleep operation -
Sleep operation
Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, press
the SLEEP button until "OFF" appears on the display.
To cancel the sleep operation without setting the system to the stand-by mode, press
the SLEEP button until "OFF" appears on the display.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
The remaining sleep time is displayed for about 3 seconds.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
1
Play back the desired sound source.
2
Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time
will decrease as follows.
will decrease as follows.
3
Your system will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
SLP
SLP
30 MIN
45 MIN
15 MIN
OFF
60 MIN
90 MIN
120 MIN
Click on the first or last page to see other HT-CN410DVH service manuals if exist.