Sharp HT-CN410DVH User Manual / Operation Manual ▷ View online
E-30
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
DVD Operation
- Useful operation -
To change the angle
You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angles.
recorded from multiple angles.
Notes:
The angle number is not displayed if angles are not recorded on the disc.
Refer to the manual of the disc as the operation may vary depending on the disc.
Refer to the manual of the disc as the operation may vary depending on the disc.
To zoom images (zoom)
You can magnify images during playback.
To return to normal view:
Press the ZOOM button repeatedly to select "ZOOM OFF".
Notes:
Images may become distorted when zoomed.
Subtitles cannot be zoomed.
Only "zoom x 2" is available for DivX
Subtitles cannot be zoomed.
Only "zoom x 2" is available for DivX
®
files.
When " " is displayed in the upper right corner of the TV screen,
press the ANGLE button repeatedly to select the desired angle
number.
1
Whilst a disc is playing, press the ZOOM
button.
Each press of the ZOOM button cycles through the zoom settings as follows:
2
To shift the view and display the
desired part of a zoomed image,
press the
8
,
9
,
;
or
:
button
repeatedly.
ZOOM X1.5
ZOOM X1.5
ZOOM X2
ZOOM X3
ZOOM OFF
E-31
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
HT-CN410DVH
DVD Operation
- Useful operation -
Useful operation (continued)
To play repeatedly (repeat play)
You can play a chapter (track) or a title repeatedly by specifying it during playback.
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 36).
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 36).
Caution:
After performing repeat play, be sure to press the button. Otherwise, the disc will
play continuously.
play continuously.
Note:
On some discs, the repeat play function is disabled.
1
Whilst a disc is playing, press the REPEAT button.
TV screen
Unit display
Each time the button is pressed, the repeat play mode changes in the following order.
The repeat play mode changes as follows on DVD:
The repeat play mode changes as follows on DVD:
The repeat play mode changes as follows on SVCD/VCD/audio CD/MP3:
The repeat play mode changes as follows on JPEG/DivX
®
Video disc:
MP3 and JPEG are displayed when MP3 menu screen is "ON" (see page 39).
2
To return to the normal playback, press the REPEAT button re-
peatedly to select "REPEAT OFF".
REPEAT CHAPTER
REP 1
REP 1
"REPEAT CHAPTER"
"REPEAT TITLE"
"REPEAT OFF"
"REP 1"
"REP"
No display
Repeat the currently
playing chapter.
playing chapter.
Repeat the currently
playing title.
playing title.
The normal playback.
"REPEAT ONE"
"REPEAT DISC"
"REPEAT OFF"
"REP 1"
"REP"
No display
Repeat the currently
playing track.
playing track.
Repeat the currently
playing disc.
playing disc.
The normal playback.
"REPEAT ALBUM"
"REPEAT DISC"
"REP 1"
"REP"
"REP"
No display
"REPEAT OFF"
"REPEAT ONE"
E-32
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
DVD Operation
- Useful operation -
To play the contents between the specified
points repeatedly (A-B repeat)
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying it during playback.
Notes:
A-B repeat play is disabled on some discs.
A-B repeat play for DVD is possible only within a title.
A-B repeat play for SVCD/VCD is possible only within a track.
Some scenes on DVD may not allow A-B repeat play.
A-B repeat play for DVD is possible only within a title.
A-B repeat play for SVCD/VCD is possible only within a track.
Some scenes on DVD may not allow A-B repeat play.
To select a title from the top menu of the
disc
disc
On a DVD with multiple titles, you can select a title from the top menu.
Note:
The procedure shown here provides only general steps. The actual procedure for
using the title menu depends on the disc. See the disc jacket for details.
using the title menu depends on the disc. See the disc jacket for details.
To select a subtitle or audio language from
the disc menu
the disc menu
You can select the desired subtitle or audio language and sound system [Dolby Digital
(5.1ch) or DTS sound] on your DVD if it has a disc menu.
(5.1ch) or DTS sound] on your DVD if it has a disc menu.
Note:
The procedure shown here provides only general steps. The actual procedure for
using the disc menu depends on the disc. See the disc jacket for details.
using the disc menu depends on the disc. See the disc jacket for details.
1
Whilst a disc is playing, press the A - B button.
TV screen
Unit display
This registers the start point (A).
2
Press the A - B button again to enter the end point (B).
This starts A-B repeat from the start point (A) to the end point (B).
3
Press the A - B button to return to the normal playback.
A TO B SET A
PROG
B
REPEAT1
SLEEP
CHP
PRESET
KHz
MHz
R E P A -
REP A-
A TO B SET B
PROG
REPEAT1
SLEEP
CHP
PRESET
KHz
MHz
R E P A - B
REP A-B
1
Whilst in the stop or playback mode,
press the TITLE button to display the
title menu.
press the TITLE button to display the
title menu.
Example
2
Use the
8
,
9
,
;
or
:
button to select a title, and then press the
ENTER button.
The selected title plays.
Or use the direct number buttons for some discs.
1
Whilst in the stop or playback
mode, press the RETURN button
to display the disc menu.
mode, press the RETURN button
to display the disc menu.
Example
2
Press the
8
,
9
,
;
or
:
button to change the setting and press the
ENTER button.
Or use the direct number buttons for some discs.
2
1 Drama
Action
4
3 SF
Comedy
1.Highlights
2.Start Movie
2.Start Movie
E-33
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
HT-CN410DVH
DVD Operation
- Various settings -
Various settings
The subtitle language, audio language and TV type you select during playback are
reset each time you set this unit to the stand-by mode or switch the input. To keep your
own settings, set them in the setup menu (see page 19).
reset each time you set this unit to the stand-by mode or switch the input. To keep your
own settings, set them in the setup menu (see page 19).
To change the subtitle language
You can change the subtitle language or hide subtitles during playback.
Notes:
On some discs, the subtitle language cannot be changed.
If no subtitles are recorded on the disc, "SUBTITLE OFF" is displayed.
It may take time to switch the subtitle language to the selected one.
Subtitles cannot be hidden on some DVDs.
If no subtitles are recorded on the disc, "SUBTITLE OFF" is displayed.
It may take time to switch the subtitle language to the selected one.
Subtitles cannot be hidden on some DVDs.
To change the audio language
(audio output)
(audio output)
During playback, you can change the audio language (audio output).
Notes:
On some discs, the audio language cannot be changed.
For the audio language and audio system, refer to the manual of the disc.
The audio language of DivX
For the audio language and audio system, refer to the manual of the disc.
The audio language of DivX
®
files can be switched as MP3 files. However, it may
change like DVD ("Audio 1/3", "Audio 2/3", "Audio 3/3"…) depending on the record-
ing method.
ing method.
Whilst a disc is playing, press the SUBTITLE
button repeatedly to select the desired subtitle
language.
Whilst a disc is playing, press the LANGUAGE
button repeatedly to select the desired audio
number.
When playing DVD, the language changes as follows:
When playing super video CD, video CD, audio CD, MP3 and DivX
®
, the sound
changes as follows:
SUBTITLE 01/03: ENGLISH
AUDIO 2/8: AC-3 5.1CH ENGLISH
Audio 1/3: DOLBY 5.1 English
Audio 2/3: DTS 5.1 English
•
•
•
1: Original <English>
(Dolby Digital 5.1 ch)
(Dolby Digital 5.1 ch)
2: English
(DTS 5.1 ch)
(DTS 5.1 ch)
Mono Left
Mono Right
Stereo
Click on the first or last page to see other HT-CN410DVH service manuals if exist.