Sharp HT-CN410DVH User Manual / Operation Manual ▷ View online
E-10
HTCN410DVH 8_E1.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
System Connections
- Speaker connection -
Speaker connection
Speaker terminals on the main unit and speakers, and speaker wires are distinguished by colours.
Connect the speaker and the unit by matching the colours.
(For speaker installation, see page 11.)
Connect the speaker and the unit by matching the colours.
(For speaker installation, see page 11.)
Front speaker
(right)
Centre speaker
Surround speaker
(left)
Subwoofer
Surround speaker
(right)
Front speaker
(left)
E-11
HTCN410DVH 8_E1.fm
03/10/29
ENGLISH
HT-CN410DVH
System Connections
- Speaker connection / Aerial connection -
Speaker connection (continued)
Connecting speaker wires
Aerial connection
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
Make sure to leave the AC power lead disconnected when connecting the
speakers.
speakers.
Caution:
The supplied speaker for HT-CN410DVH is designed exclusively for HT-
CN410DVH. Do not connect speakers for HT-CN410DVH to other equipment.
Also, do not connect other speakers to HT-CN410DVH. It may cause malfunc-
tion.
Also, do not connect other speakers to HT-CN410DVH. It may cause malfunc-
tion.
Do not mistake the and , and right and left terminals of the speaker wires.
(The right speaker is placed on the right when you face the unit.)
Do not let the bare speaker wires touch each other.
Do not stand or sit on the speakers. You may be injured.
Do not short-circuit the speaker wires. If the power is
turned on, malfunction may occur.
When disconnecting the speaker wires, unplug the AC
power lead, and then disconnect the speaker wires from
the main unit.
the main unit.
SUB
WOOFER
SURROUND
R
R
4 OHMS
8 OHMS
CENTER
FRONT
L
L
MINIMUM RATED SPEAKER IMPEDANCE
Red
(
+)
Red
Black
(
−)
Black
1
Connect speaker wires to the main
unit.
unit.
Incorrect
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the
direction where the strongest signal can be
received.
socket and position the FM aerial wire in the
direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM socket.
Position the AM loop aerial for optimum
reception. Place the AM loop aerial on a shelf,
etc., or attach it to a stand or a wall with screws
(not supplied).
Position the AM loop aerial for optimum
reception. Place the AM loop aerial on a shelf,
etc., or attach it to a stand or a wall with screws
(not supplied).
Note:
Placing the aerial on the unit or near the AC
power lead may cause noise pickup. Place the
aerial away from the unit for better reception.
power lead may cause noise pickup. Place the
aerial away from the unit for better reception.
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
FM aerial
AM loop
aerial
aerial
External FM aerial
E-12
HTCN410DVH 8_E1.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
System Connections
- Connections to TV, VCR, etc. -
Connections to TV, VCR, etc.
Connecting to a TV with a video input socket
Connecting to a TV with an S-video input socket
Audio connection to TV or VCR
You can enjoy surround sound from TV or VCR by connecting them to the unit as
shown.
shown.
Caution:
Turn off all other equipment before making connections.
TV
To video
input socket
input socket
To audio
input sockets
input sockets
Video cable (not supplied)
Audio cable
(not supplied)
(not supplied)
Video signal
Audio signal
To S-video
input socket
input socket
To audio
input sockets
input sockets
TV
S-video cable
(commercially available)
(commercially available)
Video signal
Audio cable (not supplied)
Audio signal
To audio
output sockets
output sockets
Audio cable (not supplied)
Audio cable (not supplied)
Audio signal
Audio signal
TV
To audio
output sockets
output sockets
VCR
E-13
HTCN410DVH 8_E1.fm
03/10/29
ENGLISH
HT-CN410DVH
System Connections
- Connections to TV, VCR, etc. -
Connections to TV, VCR, etc. (continued)
Connecting to a Digital Amplifier
You can enjoy 2 Channel Digital Stereo Sound.
To enjoy 2 Channel Digital Stereo Sound.
* Please consult your local audio/video dealer.
Connecting to an Amplifier with Dolby Digital Decoder or DTS Decoder
To enjoy Dolby Digital or DTS.
* Please consult your local audio/video dealer.
To COAXIAL DIGITAL
OUT socket
*Coaxial audio
cable (not supplied)
cable (not supplied)
To digital audio input
Amplifier with a
coaxial digital input
Front left
Speaker
Speaker
Front right
Speaker
Speaker
To COAXIAL DIGITAL
OUT socket
OUT socket
To digital audio input
Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG 2 Decoder
Centre Speaker
Front left
Speaker
Speaker
Front right
Speaker
Speaker
Surround right
Speaker
Speaker
Surround left
Speaker
Speaker
Subwoofer
*Coaxial audio
cable (not supplied)
cable (not supplied)
Click on the first or last page to see other HT-CN410DVH service manuals if exist.