DOWNLOAD Sharp DK-V2 Service Manual ↓ Size: 1.03 MB | Pages: 16 in PDF or view online for FREE

  DK-V2

Listening to Bluetooth enabled devices 

 About Bluetooth technology

Bluetooth wireless technology is a short-range radio technology that
enables wireless communication between various types of digital
devices, such as mobile phone or computer. It operates within a
range of about 10 meters (30 feet) without the hassle of having to use
cables to connect these devices. Since the Bluetooth   technology
does not require line of sight between the communicating devices, it
is not necessary to line up the transmitting device and the receiver,
as in the case of infra red technology.

Communication System and Bluetooth Profile of this unit
There are many available Bluetooth Profiles describing the basic 
communication methods, specific functions and uses, to enable 
communication between devices.

This unit supports the following:
Communication System: Bluetooth Specification version 1.2
Bluetooth Profile : A2DP (Advanced Audio Distribution Profile)
A2DP enables audio streaming from an A2DP equipped Bluetooth 
stereo audio source device (eg mobile phone) to this unit. By 
converting wireless stereo audio signal to analogue audio signal, you 
can enjoy listening to the sound through this speaker system. 

Note:
For details on how to operate the device to be connected, refer to
the operating manual supplied with the device.

 Pairing Bluetooth devices 

Bluetooth devices need to be initially paired first before they can
exchange data. Once paired, it is not necessary to pair them again
unless:

Pairing information is deleted whilst repairing, etc.
Pairing is made with more than 8 devices.
Pairing can only be made one device at a time. This unit can be
paired to a maximum of 8 devices. If subsequent device is paired,
the oldest device paired, will be deleted and replaced with the new
one.
This unit is reset. All pairing information is deleted when unit is 
reset. (see page 13)

Audio stream

Bluetooth

 mobile phone or  

other 

Bluetooth

 Stereo 

audio source device

Status Illuminator 

around 

ON/STAND-BY 
button (blue)

Pairing indicator 
(blue)

Power on

Lights up

Off

Pairing mode

Lights up

Blinking 

Connecting or
communicating

Lights up

Lights up

  DK-V2

Listening to Bluetooth enabled devices (continued)

Pairing with other Bluetooth source device

Release the button when the pairing indicator (blue) starts
blinking. The unit is now in pairing mode and is ready to be
paired with other Bluetooth source device.

Note:
Pairing indicator (blue) will stop blinking once the unit is
successfully paired with the source device.

Perform pairing procedure on the source device to detect
this unit. (Refer the source device operating manual for
details).
“DK-V2” will appear in the detected devices list (if available) in
the source device.

Place the devices to be paired within 1 meter (3 feet) of each
other when pairing.
Some source devices are unable to display lists of detected
devices. To pair this unit with the source device, refer to the
source device operating manual for details.

If Passcode* is required, enter “0000”. 
Pairing indicator (blue) on the unit will stop blinking once the
unit is successfully paired with the source device. Pairing
information is now memorised in the unit.
* Passcode may be called PIN Code, Passkey, PIN number or
Password.

Start the Bluetooth connection from the source device.

Some audio source devices may connect with the unit

automatically, otherwise follow the instructions in the source
device operating manual to start connection.

 If this unit or the source device is turned off before Bluetooth

connection is completed, pairing will not be completed and the
pairing information will not be memorised. Repeat step 1
onwards to start pairing again. 

 To pair with other devices, repeat steps 1 - 5 for each device.

This unit can be paired to a maximum of 8 devices. If subsequent
device is paired, the oldest device paired, will be deleted from
the list. 

 Once a device is ousted or deleted from the pairing list, the

pairing information for the device is also deleted. To listen to the
sound from the device again, it needs to be re-paired. Perform
steps 1 - 5 to pair the device again. 

 Passcode of this unit is fixed to “0000” and can only be paired

with Bluetooth source device whose passcode is also “0000”.

  DK-V2

 The source device Bluetooth functionality is ON. 
 Pairing of this unit and the source device is completed. 
 Any device connected to the AUX IN socket is turned off. 

You need to make the Bluetooth connection again if:

- The unit is not turned on.
- The source device is not turned on, or  its Bluetooth functionality

is off or is in sleep mode.  

If both the Bluetooth connected device and the one connected to
the AUX IN are played simultaneously, only the Bluetooth sound
can be heard.

Perform any of the followings.
- Terminate the Bluetooth connection on the audio source device.

Refer the operating manual supplied with the device.

-  Turn off the Bluetooth stereo audio source device.
-  Turn off this unit.

Note:
The volume of this unit may not be controlled as intended depending
on the device.

Start the Bluetooth connection from the Bluetooth stereo
audio source device.

Start playing on the Bluetooth stereo audio source 
device.

Note:
If the source device has an extra bass function or equaliser
function, set them to off. If these functions are on, sound may be
distorted.

  DK-V2

Listening to the sound from audio devices not 
supporting Bluetooth wireless technology 
(portable audio device, computer, etc.)

To prevent noise interference, place the unit away from the

television.
If connecting the speaker to a device with a built-in radio or tuner,
radio broadcasting cannot be received or sensitivity may be
reduced significantly.
If the source device has an extra bass function or equaliser
function, set them to off. If these functions are on, sound may be
distorted.
If the source device’s headphone output has a line switch, better
sound will be heard if it is set to on. See the operating manual of
the source device.
If both the Bluetooth connected device and the one connected to
the AUX IN socket are played at the same time, only Bluetooth
sound can be heard. Turn off the Bluetooth pairing to listen to the
AUX IN sound.

 To the line output socket

Start playing on the source device.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.