Sharp DK-V2 User Manual / Operation Manual ▷ View online
13
DK-V2
References
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet.
humid environment may cause condensation inside the cabinet.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
leave the power on until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1
Press the ON/STAND-BY button to turn off the unit.
2
Whilst holding the PAIRING button, press the ON/STAND-BY
button.
The pairing indicator blinks a few times and all pairing
information is deleted.
button.
The pairing indicator blinks a few times and all pairing
information is deleted.
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Symptom
Possible cause
When a button is
pressed, the unit
does not respond.
pressed, the unit
does not respond.
(Using batteries only) Are the batteries
dead?
Set the unit to the power stand-by
mode and then turn it back on.
If the unit still malfunctions, reset it.
dead?
Set the unit to the power stand-by
mode and then turn it back on.
If the unit still malfunctions, reset it.
No sound.
Is the volume level set to “0”?
(Using batteries only) Are the batteries
dead?
Are the connections made correctly?
Is the unit too far from the Bluetooth
stereo audio source device?
Is the unit paired with the Bluetooth
stereo audio source device?
(Using batteries only) Are the batteries
dead?
Are the connections made correctly?
Is the unit too far from the Bluetooth
stereo audio source device?
Is the unit paired with the Bluetooth
stereo audio source device?
Bluetooth sound is
interrupted or
distorted.
interrupted or
distorted.
Is the unit too near to a device that
generates electromagnetic radiation?
Is there any obstacle between the unit
and the Bluetooth stereo audio source
device?
generates electromagnetic radiation?
Is there any obstacle between the unit
and the Bluetooth stereo audio source
device?
14
DK-V2
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
(*1) This power consumption value is obtained when in the power
stand-by mode.
(*2) The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity, aerial’s
performance, operating system, software application, etc.
microwave oven, static electricity, reception sensitivity, aerial’s
performance, operating system, software application, etc.
Power source
DC IN 6V
2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
DC IN 3V
[ “AA” size (UM/SUM-3, R6 or
HP-7) battery x 4]
Power
consumption
consumption
Power on: 3 W
Power stand-by: 0.5 W (*1)
Power stand-by: 0.5 W (*1)
Output power
RMS: 3.8 W (1.9 W + 1.9 W) (10% T.H.D.)
Speaker
1-way type speaker system
5 cm (2") - 6 ohms - Full Range
5 cm (2") - 6 ohms - Full Range
Speaker
maximum input
power
maximum input
power
3.8 W/Channel
Speaker rated
input power
input power
1.9 W/Channel
Input
terminals
terminals
Auxiliary (audio signal): 251 mv/47 k ohms
Dimensions
Width: 380 mm (15")
Height: 158.5 mm (6-1/5")
Depth: 157 mm (6-1/8")
Height: 158.5 mm (6-1/5")
Depth: 157 mm (6-1/8")
Weight
1.1 kg (2.40 lbs.)
Communication
system
system
Bluetooth Specification version 1.2
Output
Bluetooth Specification Power Class 2
Maximum
communication
range
communication
range
Line of sight approx. 10 meters (30 feet) (*2)
Frequency
band
band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Compatible
Bluetooth
profile
Bluetooth
profile
A2DP (Advanced Audio Distribution Profile)
MEMO
03/12/17
TINSEA189AWZZ
07H R AS 2
