Sharp DK-V2 User Manual / Operation Manual ▷ View online
BLUETOOTH
STEREO SPEAKER
MODEL
DK-V2
OPERATION MANUAL
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
The
Bluetooth
word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by SHARP is under license.
®
2
DK-V2
Important Instruction
Special notes
WARNINGS
When the unit is set at STAND-BY mode, mains voltage is still
present inside the unit.
present inside the unit.
This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.
The supplied AC/DC adaptor contains no user serviceable parts.
Never remove covers unless qualified to do so.
It contains dangerous voltages, always remove mains plug from
the main outlet socket before any service operation or when not in
use for a long period.
Never remove covers unless qualified to do so.
It contains dangerous voltages, always remove mains plug from
the main outlet socket before any service operation or when not in
use for a long period.
The AC/DC adaptor supplied with the DK-V2 must not be used
with other equipment.
with other equipment.
Never use an AC/DC adaptor other than the one specified.
Otherwise, problems or serious hazards may be created.
Otherwise, problems or serious hazards may be created.
To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
dripping or splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
Do not turn the volume on to full at switch on. Listen to music at
moderate levels.
moderate levels.
Note for users in United Kingdom:
This equipment complies with the requirement of Directive 1999/
5/EC.
5/EC.
The Declaration of Conformity can be viewed at the following URL
address.
http://www.sharp.de/doc/DK-V2.pdf
address.
http://www.sharp.de/doc/DK-V2.pdf
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or broadcast-
ing such material without permission of the relevant licensees or owners
of the copyright is prohibited by law. SHARP is not in a position to autho-
rise the copying or broadcasting of copyright materials and nothing in this
OPERATION MANUAL should be implied as giving that authority.
ing such material without permission of the relevant licensees or owners
of the copyright is prohibited by law. SHARP is not in a position to autho-
rise the copying or broadcasting of copyright materials and nothing in this
OPERATION MANUAL should be implied as giving that authority.
For other countries:
Audio-visual material may consist of copyrighted works which must not be
recorded without the authority of the owner of the copyright. Please refer
to the relevant laws in your country.
recorded without the authority of the owner of the copyright. Please refer
to the relevant laws in your country.
3
DK-V2
General Information
Features
This unit is a wireless speaker system that uses
Bluetooth
®
wireless
technology. Sound can be enjoyed wirelessly with your
Bluetooth
enabled mobile phone, portable music player, personal computer or
any other
any other
Bluetooth
enabled product that supports A2DP (Advanced
Audio Distribution Profile).
This unit features:
This unit features:
Built-in high power 3.8 W amplifier for powerful wireless sound.
Two-way power supply option: AC/DC adaptor (supplied) or
batteries (not supplied).
batteries (not supplied).
Light and compact design for easy portability.
Analogue input for connection with devices that do not support
Bluetooth
wireless technology.
Accessories
Please confirm that only the following accessories are included.
Note:
The AC/DC adaptor may be different from the one in the drawing.
Contents
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 5
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7
Preparation for Use
Power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 8
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Bluetooth
Listening to
Bluetooth
enabled devices. . . . . . . . . . . . . . . .9 - 11
Advanced Feature
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AC power lead 1
AC power lead 1
(for Australia only)
AC power lead 1
(for United Kingdom only)
Plug adaptor 1
(for Philipines only)
AC/DC adaptor 1
RADPAA036AWZZ
RADPAA036AWZZ
RADPAA044AWZZ (for Australia only)
4
DK-V2
General Information
Precautions
General
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.
60˚C (140˚F) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
placed on the apparatus.
Attention should be drawn to the environmental aspects of battery
disposal.
disposal.
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
(41˚F - 95˚F).
The apparatus is designed for use in moderate climate.
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
Volume control
The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on. Listen to music at moderate levels.
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on. Listen to music at moderate levels.
Please ensure that the equipment is
positioned in a well-ventilated area and
ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the
equipment.
positioned in a well-ventilated area and
ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the
equipment.
Use the unit on a firm, level surface free from
vibration.
vibration.
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/ electrical
equipment (home computers,
facsimiles, etc.) which generate
electrical noise.
strong magnetic fields, excessive dust,
humidity and electronic/ electrical
equipment (home computers,
facsimiles, etc.) which generate
electrical noise.
In case of an electrical storm, unplug the
unit for safety.
unit for safety.
Do not use an external power supply other
than the 6V DC supplied with this unit as it
may be damaged.
than the 6V DC supplied with this unit as it
may be damaged.
SHARP is not responsible for damage due to improper use. Refer
all servicing to a SHARP authorised service centre.
all servicing to a SHARP authorised service centre.
Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
removing it from the wall socket, as pulling
the lead can damage internal wires.
The AC power plug is used as a disconnect
device and shall always remain readily
operable.
device and shall always remain readily
operable.
10 cm (4")
10 cm (4")
Do not remove the outer cover, as this
may result in electric shock. Refer internal
service to your local SHARP service
facility.
may result in electric shock. Refer internal
service to your local SHARP service
facility.
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, tablecloths, curtains,
etc.
covering the ventilation openings with items,
such as newspapers, tablecloths, curtains,
etc.