DOWNLOAD Sharp XG-P25XE (serv.man7) Service Manual ↓ Size: 589.97 KB | Pages: 7 in PDF or view online for FREE

1-1. Remove the two screws and detach the lens cover.
1-2. Hold the lens top cover and tilt it up until its back end alone stays hooked. Then slide and detach the top cover.

Detach the lens shutter.
(When attaching the lens shutter back in position, match the left (L) and right (R) markings.)

1

1

2

Top Cover

Lens Shutter

Lens Cover

2-1. Detach the intake cover.
2-2. Loosen the screw and slide the lamp cover out of position.
2-3. Remove the three screws and lift the lamp unit out of position.

3-1. Remove the six screws off the terminal board at the back.
3-2. Remove the six screws and detach the rear body.

2-1

2-3

3-2

3-2

2-2

3-1

Lamp Cover

Rear Body

Lamp Unit

Intake Cover

4-1. Remove the five screws.
4-2. Remove the four screws.
4-3. Press on both sides of the set and undo the hooks. Lift the top body with lens shift knob and disconnect the

connector.

4-1

4-1

4-1

4-2

Lens Shift Knob

Top Body

4-3

4-3

4-3

5-1. Remove the five screws and detach the PC I/F unit.
5-2. Disconnect the five connectors.
5-3. Remove the two screws and detach the output sub-PWB.
5-4. Disconnect the twelve connectors.
5-5. Take out the hexagonal supports.
5-6. Remove the three screws and detach the output/input PWB assembly.

(RP)

(BP)

(GP)

(FF)

(FD)

(LF)

(F)

(AZ)

(SO)

(Q)

(GP)

(D)(FR)

(EA)

(FE)

5-5

5-3

5-6

5-1

5-4

5-2

Output/Input
PWB Ass'y

Output Sub PWB

PC I/F Unit