DOWNLOAD Sharp CD-XP200H Service Manual ↓ Size: 1.55 MB | Pages: 37 in PDF or view online for FREE

Model
CD-XP200H
Pages
37
Size
1.55 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-xp200h.pdf
Date

Sharp CD-XP200H User Manual / Operation Manual ▷ View online

E-18
CD-XP200H(H)E2.fm
02/02/19
CD-XP200H
ENGLISH
Ta
pe
 R
eco
rd
in
g
- Reco
rd
in
g
 t
o
 a ca
sse
tt
e t
a
p
e
 -
 
Recording from the radio
To interrupt recording:
Press the REC PAUSE (TAPE-2 
) button.
To resume recording, press the   /   (   ) button.
To stop recording:
Press the   button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
 
 
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the   button.
TAPE 1 and TAPE 2 will simultaneously stop.
 
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1
Tune in to the desired station. (See page 14.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE (TAPE-2 
)
button.
Recording will be paused.
4
Press the   /   (   ) button to start re-
cording.
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape, make 
sure that the erase-prevention tabs are not re-
moved. Cassettes have removable tabs that 
prevent accidental recording or erasing.
! To protect the recorded sound, remove the tab 
after recording. Cover the tab hole with adhe-
sive tape to record on the tape without the tab.
Side A
Tab for side B
Tab for side A
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the
TAPE 1 cassette compartment. Insert
a blank tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is 
the same length as the master tape.
3
Press the TAPE (1   2) button until
"TAPE 1" appears on the display.
4
Press the REC PAUSE (TAPE-2 
)
button.
Recording will be paused.
5
Press the   /   (   ) button to start
dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compartment with the side to 
be erased facing toward you.
2
Press the TAPE (1   2) button until "TAPE 2" appears on the display.
3
Press the REC PAUSE (TAPE-2 
) button.
4
Press the   /   (   ) button to start erasing.
 Tuning (See page 14.)
E-19
CD-XP200H(H)E2.fm
02/02/19
CD-XP200H
ENGLISH
Advance
d Features
- Usi
n
g the 
Radio Da
ta
 S
y
stem (RDS
-
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM stations provide.
These FM stations send additional signals along with their regular programme
signals. They send their station names, and information about the type of pro-
gramme such as sports or music, etc.
When tuned to an RDS station, "RDS" and the station name will be displayed.
"TP" (Traffic Programme) will appear on the display when the received broadcast
carries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic
information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received.
 
 
You can control the RDS by using the buttons on the main unit only.
Information provided by RDS
Each time the DISPLAY MODE button is pressed, the display will switch as fol-
lows:
 
When you are tuning in to a station other than an RDS station or to an RDS station
which sends weak signal, the display will change in the following order:
 
Notes for RDS operation
If any of the following events occur, it does not mean that the unit is 
faulty:
! "PS", "NO PS" and a station name appear alternately, and the unit does not oper-
ate properly.
! If a particular station is not broadcasting properly or a station is conducting tests,
the RDS reception function may not work properly.
! When you receive an RDS station whose signal it too weak, information like the
station name may not be displayed.
! "NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds, and then the fre-
quency will be displayed.
Notes for radio text:
! The first 8 characters of the radio text will appear for 4 seconds and then they will
scroll across the display.
! If you tune in to an RDS station which is not broadcasting any radio text, "NO RT"
will be displayed when you switch to the radio text position.
! Whilst radio text data is received or when the text contents change, "RT" will be
displayed.
Station name (PS)
Programme type (PTY)
Frequency
Radio text (RT)
NO PS
NO PTY
FM 98.80 MHz
NO RT
E-20
CD-XP200H(H)E2.fm
02/02/19
CD-XP200H
ENGLISH
Advance
d Features
- Usi
n
g the 
Radio Da
ta
 S
y
stem (RDS
-
 
Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and
TA (Traffic Announcement).
You can search for and receive the following PTY, TP and TA signals.
NEWS
Short accounts of facts, events and publicly expressed views, report-
age and actuality.
AFFAIRS
Topical programme expanding or enlarging upon the news, generally 
in different presentation style or concept, including debate, or analy-
sis.
INFO
Programmes whose purpose is to impart advice in the widest sense.
SPORT
Programme concerned with any aspect of sport.
EDUCATE
Programme intended primarily to educate, of which the formal ele-
ment is fundamental.
DRAMA
All radio plays and serials.
CULTURE
Programmes concerned with any aspect of national or regional cul-
ture, including language, theatre, etc.
SCIENCE
Programmes about the natural sciences and technology.
VARIED
Used for mainly speech-based programmes usually of light-entertain-
ment nature, not covered by other categories. Examples include: 
quizzes, panel games, personality interviews.
POP M
Commercial music, which would generally be considered to be of cur-
rent popular appeal, often featuring in current or recent record sales 
charts.
ROCK M
Contemporary modern music, usually written and performed by 
young musicians.
EASY M
Current contemporary music considered to be "easy-listening", as op-
posed to Pop, Rock or Classical, or one of the specialised music 
styles, Jazz, Folk or Country. Music in this category is often but not 
always, vocal, and usually of short duration.
LIGHT M
Classical music for general, rather than specialist appreciation. Ex-
amples of music in this category are instrumental music, and vocal or 
choral works.
CLASSICS
Performances of major orchestral works, symphonies, chamber mu-
sic, etc., and including Grand Opera.
OTHER M
Musical styles not fitting into any of the other categories. Particularly 
used for specialist music of which Rhythm & Blues and Reggae are 
examples.
WEATHER
Weather reports and forecasts and meteorological information.
FINANCE
Stock Market reports, commerce, trading, etc.
CHILDREN
For programmes targeted at a young audience, primarily for entertain-
ment and interest, rather than where the objective is to educate.
SOCIAL
Programmes about people and things that influence them individually 
or in groups. Includes: sociology, history, geography, psychology and 
society.
RELIGION
Any aspect of beliefs and faiths, involving a God or Gods, the nature 
of existence and ethics.
PHONE IN
Involving members of the public expressing their views either by 
phone or at a public forum.
TRAVEL
Features and programmes concerned with travel to near and far des-
tinations, package tours and travel ideas and opportunities. Not for 
use for announcements about problems, delays, or roadworks affect-
ing immediate travel where TP/TA should be used.
LEISURE
Programmes concerned with recreational activities in which the listen-
er might participate. Examples include, Gardening, Fishing, Antique 
collecting, Cooking, Food & Wine, etc.
JAZZ
Polyphonic, syncopated music characterised by improvisation.
COUNTRY
Songs which originate from, or continue the musical tradition of the 
American Southern States. Characterised by a straightforward melo-
dy and narrative story line.
NATION M
Current Popular Music of the Nation or Region in that country's lan-
guage, as opposed to International 'Pop' which is usually US or UK 
inspired and in English.
OLDIES
Music from the so-called "golden age" of popular music.
FOLK M
Music which has its roots in the musical culture of a particular nation, 
usually played on acoustic instruments. The narrative or story may be 
based on historical events or people.
DOCU-
MENT
Programme concerned with factual matters, presented in an investi-
gative style.
TEST
Broadcast when testing emergency broadcast equipment or receiv-
ers.
ALARM !
Emergency announcement made under exceptional circumstances to 
give warning of events causing danger of a general nature.
NONE
No programme type (receive only).
TP
Broadcasts which carry traffic announcements.
TA
Traffic announcements are being broadcast.
E-21
CD-XP200H(H)E3.fm
02/02/21
CD-XP200H
ENGLISH
Advance
d Features
- Usi
n
g the 
Radio Da
ta
 S
y
stem (RDS
-
Using the Radio Data System (RDS) (continued)
Using the Auto Station Programme Mem-
ory (ASPM)
Whilst in the ASPM operation mode, the tuner will automatically search for new RDS
stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of new stations you
can store will be less.
 
To stop the ASPM operation before it is complete:
Press the ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Notes:
" If the same station is broadcasting on different frequencies, the strongest fre-
quency will be stored in memory.
" Any station which has the same frequency as one stored in memory will not be
stored.
" If 40 stations have already been stored in memory, the scan will be aborted. If you
want to redo the ASPM operation, erase the preset memory.
" If no stations have been stored in memory, "END" will appear for about 4 seconds.
" If the RDS signals are very weak, station names may not be stored in memory.
To erase all of the contents of preset memory:
To store a station name again if the wrong name was stored in mem-
ory:
It may be impossible to store station names in memory using the ASPM function if
there is lots of noise or if the signal is too weak. In this case, perform as follows.
Notes:
" The same station name can be stored in different channels.
" In a certain area or during certain time periods, the station names may temporarily
be different.
1
Press the TUNER (BAND) button to select the FM band.
2
Press and hold down the ASPM button for at least 3 seconds.
1
After "ASPM" has flashed for about 4 seconds, scanning will start (87.50 - 
108.00 MHz).
2
When an RDS station is found, "RDS" will appear for a short time and the sta-
tion will be stored in memory.
3
After scanning, the number of stations stored in memory will be displayed for 
4 seconds, and then "END" will appear for 4 seconds.
1 Press the ON/STAND-BY button to enter the power stand-by mode.
2 Whilst pressing down the TUNER (BAND) button and the EQUALIZER/X-BASS/
DEMO button, press the ON/STAND-BY button until "TUNER CL" appears.
" After performing this operation, all of the preset memory information will be erased.
1 Press the PRESET (  or  ) button to check whether the names are correct.
2 If you find a wrong name during receiving the station. Wait until the correct name 
will be displayed. And then press the MEMORY/SET button.
3 Within 30 seconds, press the MEMORY/SET button whilst the preset channel num-
ber is flashing.
" The new station name has been stored in memory correctly.
Page of 37
Display

Click on the first or last page to see other CD-XP200H service manuals if exist.