Sharp CD-SW200E User Manual / Operation Manual ▷ View online
05/3/8
CD-SW200E 24- 31.fm
25
CD-SW200E
CD or MP3/WMA disc Playback
Programmed play (for folder, title 1/2/3)
Folders or titles can be programmed within one MP3/WMA disc.
Folder, title 1, title 2 and title 3 cannot be programmed together si-
multaneously.
Folder, title 1, title 2 and title 3 cannot be programmed together si-
multaneously.
To stop playback:
Press the CD button.
The programmed contents are not cleared.
To check, add or delete programmed contents:
In the stop mode, select a folder (or title) with the or cursor but-
ton. If the folder (or title) is programmed, "MEMORY" flashes.
ton. If the folder (or title) is programmed, "MEMORY" flashes.
When you press the MEMORY/SET (MEMORY) button with
"MEMORY" flashing, the folder (or title) is removed from the pro-
gramme.
"MEMORY" flashing, the folder (or title) is removed from the pro-
gramme.
If you press the MEMORY/SET (MEMORY) button with "MEM-
ORY" off, the folder (or title) is added to the programme.
ORY" off, the folder (or title) is added to the programme.
To clear all programmes, press the CLEAR/DIMMER button in
the stop mode.
the stop mode.
To exit the MP3/WMA navigation mode:
In the stop mode, press the CD button.
The programmed contents are cleared.
Notes:
The programmed contents are cleared when you eject a disc,
play another disc, switch the function, or enter the stand-by mode
with the ON/STAND-BY button.
play another disc, switch the function, or enter the stand-by mode
with the ON/STAND-BY button.
During programmed play, the DIRECT PLAY button on the main
unit will not work.
unit will not work.
If you press the RANDOM button in the stop mode, the MP3/
WMA navigation mode will be cancelled.
WMA navigation mode will be cancelled.
If tracks are programmed using track numbers (see "Pro-
grammed play" on page 21):
grammed play" on page 21):
In the MP3/WMA navigation mode, only programme by folder (or
title) name are played. When you exit the mode, the programme by
folder (or title) name are cleared.
When you exit the MP3/WMA navigation mode, programme by track
number are cancelled.
(Programme by track number are cleared when you remove the
disc.)
title) name are played. When you exit the mode, the programme by
folder (or title) name are cleared.
When you exit the MP3/WMA navigation mode, programme by track
number are cancelled.
(Programme by track number are cleared when you remove the
disc.)
1
Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
on page 23.
on page 23.
2
Press the NAVIGATION button.
3
Press the , , or cursor button on the remote control
to select "FOL", "T-1", "T-2" or "T-3" and then press the
ENTER button.
to select "FOL", "T-1", "T-2" or "T-3" and then press the
ENTER button.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
and names of the first 2 folders (or titles) are displayed.
4
Press the or cursor button to select the desired folder
(or title) and then press the MEMORY/SET (MEMORY) but-
ton.
(or title) and then press the MEMORY/SET (MEMORY) but-
ton.
The folder (or title) is memorised with all the files.
5
Repeat step 4 for other folders (or titles).
Up to 10 folders (or 10 titles) can be programmed.
6
Press the / button to start playback.
Programmed play will always start from the smallest folder (or
title) number.
title) number.
Flashes if the folder (or title)
is programmed
is programmed
05/3/8
CD-SW200E 24- 31.fm
26
CD-SW200E
Radio
Listening to the radio
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
turns on and the "TUNER" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
Tuning
Notes:
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
matically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
desired frequency band (FM or AM).
3
Press the TUNING ( or ) button to tune in to the desired
station.
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
FM stereo mode indicator
FM stereo receiving indicator
05/3/8
CD-SW200E 24- 31.fm
27
CD-SW200E
Radio
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become discon-
nected.
To recall a memorised station
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
To erase entire preset memory
1
Perform steps 1 - 3 in "Tuning" on page 26.
2
Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
preset tuning saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
memorised for that preset channel number will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
lect the desired station.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
tion is located.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the
button and the X-BASS (SUR-
ROUND)/DEMO button, press the TUNING button until "TUN-
ER CL" appears.
ER CL" appears.
CD-SW200
PRESET
05/3/8
CD-SW200E 24- 31.fm
28
CD-SW200E
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2)
Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
TAPE button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
the "TAPE" function is activated.
TAPE button on the remote control: The unit turns on and play-
back starts (regardless of the last function).
back starts (regardless of the last function).
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
mode after 15 minutes of inactivity.
Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
the best sound. (Metal or CrO tapes are not rec-
ommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
tighten the slack with a pen or a pencil.
CD-SW200
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing the
area marked " ".
partment by pushing the
area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing towards you.
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing towards you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
want to listen to.
5
Press the / (TAPE )
button to start playback.
button to start playback.
Tape play indicator
TAPE 1
TAPE 2
Click on the first or last page to see other CD-SW200E service manuals if exist.