DOWNLOAD Sharp CD-SW200E Service Manual ↓ Size: 3.53 MB | Pages: 44 in PDF or view online for FREE

Model
CD-SW200E
Pages
44
Size
3.53 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-sw200e.pdf
Date
PREV: Sharp CD-S6470E (serv.man6) Service Manual / Technical Bulletin

Sharp CD-SW200E User Manual / Operation Manual ▷ View online

05/3/8
CD-SW200E 32-41 .fm
33
CD-SW200E
Advanced Features
  
Continued to the next page
4
Within 10 seconds, press the 
 
 or 
 
 button to se-
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET (MEMORY) button. 
5
Press the 
 
 or 
 
 button to select "PLAY" or
"REC", and press the MEMORY/SET (MEMORY) button.
The illustrations show the daily timer setting.
6
Press the 
 
 or 
 
 button to adjust the hour and
then press the MEMORY/SET (MEMORY) button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the 
 
 or 
 
 button to adjust the minutes and
then press the MEMORY/SET (MEMORY) button.
 
8
 
Set the time to finish as in steps 6 and 7 above.
White
Red
 
9
 
Switch input with the 
 
 or 
 
 button, and then
press the MEMORY/SET (MEMORY) button.
 
To select the timer playback source: CD, TUNER, TAPE 1 or 
TAPE 2.
To select the timer recording source: TUNER.
  
When you select the tuner, select a station by pressing the 
 
 or 
 
 button, and then press the MEMORY/SET 
(MEMORY) button.
  
If a station has not been programmed, "NO PRESET" will be 
displayed and timer setting will be cancelled.
 
10
 
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET (MEMORY) button.
 
Do not turn the volume up too high.
 
11
 
Press the ON/STAND-BY button to enter the power stand-
by mode.
 
The "TIMER" indicator lights up and the unit is ready for timer 
playback or timer recording.
CD-SW200
 
05/3/8
CD-SW200E 32-41 .fm
 
34
 
CD-SW200E
 
Advanced Features
 
Timer and sleep operation (continued)
 
Note:
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
 
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
 
Note:
 
The timer can also be set with the remote control.
 
12
 
When the preset time is reached, playback or recording will
start.
 
The volume will increase gradually until it reaches the preset 
volume.
 
13
 
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
 
The timer will be cancelled.
 
Daily timer:
 
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is cancelled. Cancel the daily tim-
er when it is not in use.
When performing timer playback or recording using another unit con-
nected to the GAME INPUT sockets, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically, 
however, the connected unit will not turn on or off.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the 
 
 or 
 
 button to select 
"ONCE" or "DAILY", and press the MEMORY/SET (MEMORY) 
button. 
3 Within 10 seconds, press the 
 
 or 
 
 button to select 
"ONCE  CALL" or "DAILY CALL", and press the MEMORY/SET 
(MEMORY) button. 
The unit returns to the timer stand-by mode after displaying the 
settings in order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the 
 
 or 
 
 button to select 
"ONCE" or "DAILY", and press the MEMORY/SET (MEMORY) 
button. 
3 Within 10 seconds, press the 
 
 or 
 
 button to select 
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET 
(MEMORY) button. 
Timer will be cancelled (the setting will not be cancelled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the 
 
 or 
 
 button to select 
"ONCE" or "DAILY", and press the MEMORY/SET (MEMORY) 
button. 
3 Within 10 seconds, press the 
 
 or 
 
 button to select 
"ONCE ON" or "DAILY ON", and press the MEMORY/SET 
(MEMORY) button. 
4 Press the ON/STAND-BY button to enter the power stand-by 
mode.
05/3/8
CD-SW200E 32-41 .fm
35
CD-SW200E
Advanced Features
Sleep operation
The radio, CD, MP3/WMA disc and cassette tape can all be turned
off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
To use timer and sleep operation together
 
Sleep and timer playback:
 
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
 
Sleep and timer recording:
 
For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.
 
Caution:
 
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback or recording will not be possible.
 
1
 
Play back the desired sound source.
 
2
 
Press the CLOCK/TIMER button.
 
3
 
Within 10 seconds, press the
 
 or 
 
 button to select
"SLEEP", and press the MEMO-
RY/SET (MEMORY) button. 
 
4
 
Press the 
 
 or 
 
 button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
  
3 hours - 5 minutes   5-minute intervals
  
5 minutes - 1 minute   1-minute intervals
 
5
 
Press the MEMORY/SET 
(MEMORY) button.
 
"SLEEP" will appear.
 
6
 
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
 
The volume will be turned down 1 minute before the sleep op-
eration finishes.
1
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the 
 
 or 
 
 button to select 
"SLEEP X : XX".
"X : XX" is remaining sleep time.
  
The remaining sleep time is displayed for about 10 seconds.
  
You can change the remaining sleep time whilst it is displayed by 
pressing the MEMORY/SET (MEMORY) button.
 
1
Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the 
 
 or 
 
 button to select 
"SLEEP OFF", and press the MEMORY/SET (MEMORY) button. 
1
Set the sleep time (see left, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback or recording 
(steps 2 - 10, pages 32 - 33).
Sleep timer setting
Timer playback or 
recording setting
Sleep operation will 
automatically stop.
Timer playback or recording
start time
End time
1 minute - 3 hours
Desired time
05/3/8
CD-SW200E 32-41 .fm
36
CD-SW200E
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
 
Listening to playback sounds of Game, VCR, 
DVD, etc.
Note:
To prevent noise interference, place the unit away from the television.
Auto power on function:
When you press any of the following buttons, the unit turns on.
  
GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
  
 /   button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
 
  
To record on a tape from game, VCR, etc.
Game, VCR, 
DVD player, etc.
Red
White
Yellow
Yellow
To the line output sockets
To video 
input socket
RCA lead
(not supplied)
Video cable
(not supplied)
Video cable
(not supplied)
Yellow
TV
Yellow
Red
White
 
1
 
Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) sockets.
 
2
 
Connect a TV to the rear VIDEO OUT sockets.
 
Switch the TV input to auxiliary.
 
3
 
Press the ON/STAND-BY button to turn the power on.
 
4
 
Press the GAME/VIDEO button.
 
5
 
Play the connected equipment.
 
You can enjoy sounds from the supplied speakers and images 
on the TV.
 
1
 
Insert a cassette in the TAPE 2 cassette compartment.
 
2
 
Press the GAME/VIDEO button.
 
3
 
Press the 
 button.
 
4
 
Press the   /   (TAPE  ) button.
 
5
 
Start the game system, VCR, etc.
Page of 44
Display

Click on the first or last page to see other CD-SW200E service manuals if exist.

RANDOM: