Sharp CD-PC651H User Manual / Operation Manual ▷ View online
<P=003>
PREPARATION FOR USE
●
Unplug the AC power lead from the AC socket before con-
necting or disconnecting any component.
necting or disconnecting any component.
1
2
3
■
Aerial connection
Supplied FM aerial
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the strongest
signal can be received.
position the FM aerial wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial
Connect the AM loop aerial wire to the AM LOOP socket. Position
the AM loop aerial for optimum reception.
Place the AM loop aerial on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
the AM loop aerial for optimum reception.
Place the AM loop aerial on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
Notes:
●
Do not place the aerial on the main unit as it may result in
noise pickup from the internal digital electronics.
Place the aerial away from the unit for better reception.
noise pickup from the internal digital electronics.
Place the aerial away from the unit for better reception.
●
If the AM loop aerial and the FM aerial wire are placed near
the AC power lead, interference may result.
the AC power lead, interference may result.
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Consult your dealer.
FM aerial
AM loop
aerial
aerial
External FM aerial
CD-PC651H(SUK) TINSE0262AWZZ
4
<P=004>
(Continued)
■
Speaker connection
Connect the speaker wires to the SPEAKER terminals as shown.
Front speakers
●
Connect the black wire to the minus (
−
) terminal, and the red
wire to the plus (+) terminal.
Centre speaker and surround speakers
●
Connect the wire with the white line to the minus (
−
) terminal
and the plain wire to the plus (+) terminal.
Caution:
●
Do not mix the right channel and left channel wiring when con-
necting the speakers to the unit.
necting the speakers to the unit.
●
Do not let bare speaker wires touch each other as this may
damage the amplifier and/or speakers.
damage the amplifier and/or speakers.
●
Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
reflex ducts.
●
Do not stand or sit on the speakers. If the speakers fall or
collapse, you may be injured.
collapse, you may be injured.
●
When you use speakers other than the speakers included with
this unit, if their impedance is lower than that specified for each
speaker type, the unit may be damaged.
Front speakers: 6 ohms
Centre speaker: 4 ohms
Surround speakers: 8 ohms
this unit, if their impedance is lower than that specified for each
speaker type, the unit may be damaged.
Front speakers: 6 ohms
Centre speaker: 4 ohms
Surround speakers: 8 ohms
Placing the speakers
To enjoy the surround effect, add the extra speakers in addition
to the front speakers. Position them as shown in the illustration.
to the front speakers. Position them as shown in the illustration.
TV monitor location:
Place the centre speaker near the T.V.
The close proximity of this speaker will not adversely affect the
monitor as the speaker is shielded.
Place the centre speaker near the T.V.
The close proximity of this speaker will not adversely affect the
monitor as the speaker is shielded.
●
Depending on the particular location of a TV monitor, colour
variations may appear on the TV monitor screen. If this occurs,
move the system’s speakers away from the TV monitor and
turn it off. After 15 - 30 minutes, turn on the TV monitor again.
The TV monitor’s own demagnetising function should eliminate
the variations.
If the colour variations still appear, move the system further
away from the TV monitor.
variations may appear on the TV monitor screen. If this occurs,
move the system’s speakers away from the TV monitor and
turn it off. After 15 - 30 minutes, turn on the TV monitor again.
The TV monitor’s own demagnetising function should eliminate
the variations.
If the colour variations still appear, move the system further
away from the TV monitor.
●
If any kind of magnet or an electromagnet is placed too close
to the TV monitor and the system, irregular colours may appear
on the TV monitor screen.
to the TV monitor and the system, irregular colours may appear
on the TV monitor screen.
●
Surround speakers
The surround speakers should be installed on the wall. lnstall
them 60 - 90 cm (23" - 35") above the height of your ears when
seated, if possible.
them 60 - 90 cm (23" - 35") above the height of your ears when
seated, if possible.
When the surround speakers are installed vertically, the speaker
badge will be upside down.
In this case, you can adjust the badge to face the proper direction.
Just turn it by hand.
badge will be upside down.
In this case, you can adjust the badge to face the proper direction.
Just turn it by hand.
Badge
2
1
3
Black
Red
White
line
line
Surround
speaker
(Right)
speaker
(Right)
Surround
speaker
(Left)
speaker
(Left)
Centre
speaker
speaker
Front
speaker
(Right)
speaker
(Right)
Front
speaker
(Left)
speaker
(Left)
Front
speaker
(Left)
speaker
(Left)
TV
Centre
speaker
speaker
Main
unit
unit
Front
speaker
(Right)
speaker
(Right)
Surround
speaker
(Left)
speaker
(Left)
Surround
speaker
(Right)
speaker
(Right)
Example: When installed on the wall
Surround speaker
Wall
60 - 90 cm
(23" - 35")
(23" - 35")
Example: When installed vertically
CD-PC651H(SUK) TINSE0262AWZZ
5
<P=005>
(Continued)
■
To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung on
the wall.
Be sure to use the type and size of screw that is shown to the
left.
the wall.
Be sure to use the type and size of screw that is shown to the
left.
1
Make a hole in the wall using a drill.
2
Drive a wall mount plug into the hole using a hammer. Drive
the wall mount plug in until it is flush with the wall surface.
the wall mount plug in until it is flush with the wall surface.
3
Drive one screw into the wall mount plug for each speaker
as shown in the illustration.
as shown in the illustration.
●
Drive the screws, so there is about a 5 mm (3/16") space
between the wall and the head of the screw.
between the wall and the head of the screw.
4
Mount the surround speaker on the wall so that the screw
head is inserted into the slot on the surround speaker.
head is inserted into the slot on the surround speaker.
3
4
1
2
■
Removing the speaker grilles
(Front speakers only)
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
●
The speaker grilles on the centre and surround speakers are
not removable.
not removable.
Caution:
When the speaker grilles are removed, the speaker diaphragms
are exposed. Make sure nothing comes into contact with the
speaker diaphragms.
When the speaker grilles are removed, the speaker diaphragms
are exposed. Make sure nothing comes into contact with the
speaker diaphragms.
■
Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting holes
and push them lightly with the palm of your hand to secure.
and push them lightly with the palm of your hand to secure.
1
2
■
Connecting the AC power lead
●
After connecting the speakers, plug the AC power lead into a
convenient AC socket.
convenient AC socket.
●
Unplug the AC power lead from the AC socket if the unit will
not be in use for a prolonged period of time.
not be in use for a prolonged period of time.
32 mm (1-1/4")
8-9 mm (3/8")
5 mm (3/16")
3.2 mm (1/8")
Min. 22 mm (7/8")
9 mm (3/8")
Wall surface
Wall mounting screw
Wall surface
To an AC socket
AC 230 V, 50 Hz
CD-PC651H(SUK) TINSE0262AWZZ
6
HK
<P=001>
(Continued)
■
Demo mode
When the AC power lead is first connected, the unit will enter
the demonstration mode and the words will scroll across the dis-
play continuously.
the demonstration mode and the words will scroll across the dis-
play continuously.
Note:
●
When the power is on, the X-BASS/DEMO button can be used
to select the extra bass mode.
to select the extra bass mode.
To cancel the demonstration mode:
In the power stand-by mode (demonstration mode), press the
X-BASS/DEMO button to cancel the demonstration mode and to
enter the low power consumption mode.
When the X-BASS/DEMO button is pressed again, the unit will
return to the demonstration mode.
X-BASS/DEMO button to cancel the demonstration mode and to
enter the low power consumption mode.
When the X-BASS/DEMO button is pressed again, the unit will
return to the demonstration mode.
Note:
●
When the unit is in the low power consumption mode, the
display will disappear.
display will disappear.
■
To change the brightness of the display
Press the DIMMER button.
●
The display will be made dimmer.
Note:
●
When you change the brightness of the display, the multi in-
dicator will not appear.
dicator will not appear.
To return to the original brightness:
Press the DIMMER button again.
■
Remote control
15
15
●
When inserting or removing the batteries, push them towards
the
the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the unit to mal-
function.
function.
Precautions for battery use:
●
Insert the batteries according to the direction indicated in the
battery compartment.
battery compartment.
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential dam-
age due to battery leakage.
used for long periods of time. This will prevent potential dam-
age due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or if
the operation becomes erratic.
the operation becomes erratic.
●
Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
and the sensor on the main unit with a soft cloth.
●
Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.
terfere with operation. Change the lighting or the direction of
the unit.
●
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
shock, and vibrations.
(Main unit operation)
(Main unit operation)
●
2 "AA" size batteries
(U M / SU M -3 , R6 ,
HP-7 or similar)
(U M / SU M -3 , R6 ,
HP-7 or similar)
●
Batteries are not included.
0.2 m - 6 m
(8" - 20’)
(8" - 20’)
CD-PC651H(SUK) TINSE0262AWZZ
7
Click on the first or last page to see other CD-PC651H service manuals if exist.