Sharp CD-DP2400H User Manual / Operation Manual ▷ View online
17
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
CD Pla
y
ba
c
k
- Lis
te
n
ing to a
CD
(
C
Ds
) / Re
pe
a
t or
r
a
ndom pla
y
-
"
Starting Playback with a Desired Track
You can play a disc starting with the desired track.
To stop playback:
Press the (CD ) button.
Notes:
!
When the DISC SKIP button is pressed during playback, the next disc will begin
automatically.
automatically.
!
When one of the DISC-1 - DISC-3 buttons is pressed during playback, the
selected disc will begin automatically.
selected disc will begin automatically.
Repeat or random play
"
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section and then press the / ( )
button twice.
button twice.
To cancel repeat play:
Press the / ( ) button again.
" " will go out.
" " will go out.
"
Random play
The tracks on the disc(s) can be played in random order automatically.
To cancel random play:
Press the button.
Notes:
!
If you press the
/
button during random play, you can move to the track
selected next by the random operation. On the other hand, the
/
button
does not allow you to move to the previous track. The beginning of the track being
played will be located.
played will be located.
!
In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the (CD ) button. Other-
wise, the disc(s) will play continuously.
wise, the disc(s) will play continuously.
1
Whilst in the stop mode, press one of the DISC-1 - DISC-3 but-
tons or DISC SKIP button to select the desired disc.
tons or DISC SKIP button to select the desired disc.
Selected disc number
2
Press the
or
button to select the desired track.
Selected track number
You can also select a track by pressing the
/
or
/
button on the
remote control.
3
Press the / ( ) button to start playback.
Playback of the selected track is started. When the end of last track of the
disc selected is reached, the next disc will be automatically started.
disc selected is reached, the next disc will be automatically started.
To repeat all tracks on up to 3 discs:
Press the / ( ) button twice.
Press the RANDOM button on the remote control to begin random
play.
play.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
18
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
CD Pla
y
ba
c
k
- Pr
ogr
a
m
m
e
d pla
y
-
Programmed play
You can choose up to 32 selections for playback in the order you like.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
!
Opening the disc tray automatically cancels the programmed sequence.
!
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
the function from CD to another, the programmed selections will not be cleared.
!
During programme operation, random play is not possible.
1
Whilst in the stop mode, press
one of the DISC-1 - DISC-3 but-
tons to select the desired disc.
one of the DISC-1 - DISC-3 but-
tons to select the desired disc.
Selected disc number
2
Press the
or
button to se-
lect the desired track.
Selected track number
You can also select a track by pressing the
/
or
/
button on the
remote control.
3
Press the MEMORY/SET (MEM-
ORY) button to save the track
number.
ORY) button to save the track
number.
Playback order
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
CLEAR button.
5
Press the / ( ) button to start playback.
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is lit.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
whilst the "MEMORY" indicator is lit.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
19
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
Ra
dio
- Lis
te
n
ing t
o
the
r
a
dio -
Listening to the radio
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
!
"
" will appear when an FM broadcast is in stereo.
!
If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
frequency band (FM or AM).
3
Press the TUNING/TIME ( or ) button to tune in to the desired
station.
station.
Manual tuning:
Press the TUNING/TIME button as many times as required to tune in to the de-
sired station.
sired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
Notes:
!
When radio interference occurs, auto scan tuning may stop automatically at
that point.
that point.
!
Auto scan tuning will skip weak signal stations.
!
To stop the auto tuning, press the TUNING/TIME button again.
FM stereo mode indicator
FM stereo receiving indicator
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
20
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
Ra
dio
- L
ist
en
in
g
t
o
t
h
e mem
o
ri
se
d
st
at
io
n
-
Listening to the memorised station
"
Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
ton. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
a power failure or the AC power lead disconnection.
"
To recall a memorised station
"
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
"
To erase entire preset memory
1
Perform steps 1 - 3 in "Listening to the radio" on page 19.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
mode.
3
Within 30 seconds, press the PRESET ( or ) button to select the
preset channel number.
preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
station in memory.
If the "MEMORY" and preset number indicators go out before the station is mem-
orised, repeat the operation from step 2.
orised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to select
the desired station.
the desired station.
Preset channel
Frequency and frequency band
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
quentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired station
is located.
is located.
1
Press the ON/STAND-BY button to enter the power stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button,
press the ON/STAND-BY button until "TUNER CL" appears.
press the ON/STAND-BY button until "TUNER CL" appears.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-DP2400H service manuals if exist.