DOWNLOAD Sharp CD-DP2400H Service Manual ↓ Size: 1.65 MB | Pages: 32 in PDF or view online for FREE

Model
CD-DP2400H
Pages
32
Size
1.65 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-dp2400h.pdf
Date

Sharp CD-DP2400H User Manual / Operation Manual ▷ View online

9
CD-DP2400H(E)1.fm
01/7/17
CD-DP2400H
Prepara
tion f
o
r U
s
e
- Re
mot
e
 c
ontr
o
l -
Remote control
!
Battery installation
 
Precautions for battery use:
"
Replace all old batteries with new ones at the same time.
"
Do not mix old and new batteries.
"
Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
"
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
"
Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
"
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic.
"
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
"
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
"
Keep the remote control away from moisture, heat, shock, and vibrations.
!
Test of the remote control
Check the remote control after checking all connections have been made correctly.
(See pages 10 - 12.)
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the
music.
 
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
 
1 Remove the battery cover.
2 Insert the batteries according to the direction indicated in the bat-
tery compartment.
 
When inserting or removing the batteries, push them towards the   battery termi-
nals.
3 Replace the cover.
0.2 m - 6 m
(8" - 20')
Remote sensor
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
10
CD-DP2400H(E)1.fm
01/7/17
CD-DP2400H
Prepara
tion f
o
r U
s
e
- S
y
s
te
m
 c
onne
c
tion
s
 -
System connections
AM loop aerial
Front speaker (Right)
Front speaker (Left)
Surround speaker (Right)
Surround speaker (Left)
VCR, DVD, etc.
(not supplied, see page 26.)
FM aerial
Centre speaker
Wall socket
(AC 230 V, 50 Hz)
not supplied
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
11
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
Prepara
tion f
o
r U
s
e
- S
y
s
te
m
 c
onne
c
tion
s
 -
 
!
Aerial connection
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
 
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
!
Speaker connection
Front speakers
Connect the black wire to the FRONT (-) terminal, and the red wire to the FRONT (+)
terminal.
Centre speaker
Connect the black wire to the CENTER (-) terminal, and the orange wire to the
CENTER (+) terminal.
Surround speakers
Connect the black wire to the SURROUND (-) terminal, and the grey wire to the SUR-
ROUND (+) terminal.
Caution:
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 
OHMS socket and position the FM aerial 
wire in the direction where the strongest 
signal can be received.
 
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM 
LOOP socket. Position the AM loop aerial 
for optimum reception. Place the AM loop 
aerial on a shelf, etc., or attach it to a stand 
or a wall with screws (not supplied).
< Assembling >
< Attaching to the wall >
 Wall
 
Screws 
(not 
supplied)
External FM aerial
"
If you use other speakers with impedance lower than that 
specified, the unit may be damaged. Front speakers: 6 
ohms  Centre speaker: 6 ohms  Surround speakers: 12 
ohms
"
Do not mistake the right and the left channels. The right 
speaker is the one on the right side when you face the unit.
"
Do not let the bare speaker wires touch each other.
"
Do not allow any objects to fall into or to be placed in the 
bass reflex ducts.
"
Do not stand or sit on the speakers. You may be injured.
Incorrect
Black
Red
Front speaker (Right)
Surround speaker (Right)
Surround speaker (Left)
Centre speaker
Front speaker (Left)
Grey
Orange
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
12
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
Prepara
tion f
o
r U
s
e
- S
y
s
te
m
 c
onne
c
tion
s
 -
System connections (continued)
!
Placing the speaker system
To enjoy the surround effect, we recommend that you place each speaker as shown
to the below.
 
Installation of the surround speakers:
If possible, mount the surround speakers on the wall. Install them 60 cm - 90 cm (23"
- 35") above the height of your ears when you are seated.
!
To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung on the wall. Be sure to
use the type and size of screw that is shown to the below.
 
!
Connecting the AC power lead
After making all connections, plug the unit. If you plug the unit first, 
the unit will enter the demonstration mode.
 
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a pro-
longed period of time.
Notes:
"
The front speakers and the centre speaker are magnetically shielded.
Therefore, they do not affect the display even you use them near the TV. However, 
some colour variation may occur, depending on the type of TV used.
 
If colour variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
 
If the colour variation is still present...
Move the front speakers further away from the TV.
 
"
If any kind of magnet or an electromagnet is placed too close to the TV and the sys-
tem, irregular colours may appear on the TV screen.
Main unit
Front speaker
(Left)
Front speaker
(Right)
Surround speaker
(Left)
Surround speaker
(Right)
TV
Centre speaker
Wall
Example: when installed on the wall
Example: when installed vertically
60 - 90 cm
(23" - 35")
1
Make a hole in the wall using a
drill.
2
Drive a wall mount plug into the
hole using a hammer. Drive the
wall mount plug in until it is flush
with the wall surface.
3
Drive one screw into the wall
mount plug for each speaker.
Drive the screws, so there is about a 5 
mm (3/16") space between the wall and 
the head of the screw.
4
Mount the surround speaker on
the wall so that the screw head is
inserted into the slot on the sur-
round speaker.
5 mm (3/16")
3.2 mm (1/8")
Min. 22 mm (7/8")
9 mm (3/8")
32 mm (1-1/4")
8-9 mm (3/8")
Wall mounting screw
Wall surface
Wall surface
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Page of 32
Display

Click on the first or last page to see other CD-DP2400H service manuals if exist.