DOWNLOAD Sharp CD-DP2400H Service Manual ↓ Size: 1.65 MB | Pages: 32 in PDF or view online for FREE

Model
CD-DP2400H
Pages
32
Size
1.65 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-dp2400h.pdf
Date

Sharp CD-DP2400H User Manual / Operation Manual ▷ View online

13
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
B
asic Ope
ration
- Ge
ne
ra
l c
o
ntr
o
l -
General control
!
Demonstration mode
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the 
X-BASS/DEMO button. The demonstration mode will be cancelled and the display
will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the extra
bass mode.
 
!
To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
 
!
To change the display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
!
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will increase. When it is
turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME   button to increase the volume and the VOLUME   button for
decreasing.
 
!
Bass control
When the power is first turned on, the unit will enter the extra bass mode which
emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra
bass mode, press the X-BASS/DEMO (X-BASS) button.
 
!
Equaliser
When the EQ (EQUALIZER MODE) button is pressed, the current mode setting will
be displayed. To change to a different mode, press the EQ (EQUALIZER MODE) but-
ton repeatedly until the desired sound mode appears.
 
The first time the unit is plugged in, the unit will 
enter the demonstration mode. You will see 
words scroll.
Dimmed
Brightened
X-BASS indicator
The sound is not modified.
Bass and treble are emphasised.
Bass and treble are slightly emphasised.
Treble is cut a little.
Treble is reduced a lot.
Vocals (midrange tones) are emphasised.
0
1
2
29
30 MAXIMUM
.....
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
14
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
B
asic Ope
ration
S
e
tting the
 c
loc
k
 -
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
Note:
The "CLOCK" or time will flash at the push of the CLOCK button when the AC power
supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from the beginning. If the time display is flashing, step 3
(for selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the MEMO-
RY/SET button.
3
Press the TUNING/TIME (  or  ) button to select 24-hour or 12-
hour display and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
 
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
 
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
 
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it has been reset. 
[Refer to "Clearing all the memory (reset)" on page 30 for details.]
4
Press the TUNING/TIME (  or  ) button to adjust the hour and then
press the MEMORY/SET button.
"
Press the TUNING/TIME (  or  ) button once to advance the time by 1 hour. 
Hold it down to advance continuously.
"
When the 12-hour display is selected, "AM" will change automatically to "PM".
5
Press the TUNING/TIME (  or  ) button to adjust the minutes and
then press the MEMORY/SET button.
"
Press the TUNING/TIME (  or  ) button once to advance the time by 1 
minute. Hold it down to change the time in 5-minute intervals.
"
The hour will not advance even if minutes advance from "59" to "00".
"
The clock begins counting from "0" seconds. (Seconds are not displayed.) 
The time display will disappear after a few seconds.
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5 seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on 
page 30 for details.] 
2
Perform "Setting the clock" from the beginning.
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
15
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
CD Pla
y
ba
c
k
- L
ist
en
in
g
 t
o
 a CD
 (
C
Ds)
 -
Listening to a CD (CDs)
Continued to the next page
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the   OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
"
CDs can be placed on any open position on the disc tray.
"
Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
5
Press the   OPEN/CLOSE button to close the disc tray.
Music schedule
Total number of tracks on the 
CD whose number is flashing
Total playing time of the CD whose 
number is flashing
The music schedule will display only the number of tracks on the disc.
If the CD contains more than 15 tracks, "
" will appear.
6
To select the CD you want to listen to first, press one of the DISC-
1 - DISC-3 buttons.
12 cm (5")
8 cm (3")
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
16
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
CD Pla
y
ba
c
k
- L
ist
en
in
g
 t
o
 a CD
 (
C
Ds)
 -
Listening to a CD (CDs) (continued)
To interrupt playback:
Press the CD   button on the remote control.
To resume playback from the same point, press the     button.
To stop playback:
Press 
the  
(CD ) 
button.
To remove the CDs:
Whilst in the stop mode, press the   OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
!
Do not place two CDs in one disc tray.
!
Do not push the disc tray whilst it is moving.
!
Do not turn the disc tray by hand. This may cause malfunctions.
!
If the power fails whilst the tray is open, wait until the power is restored.
!
If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the
unit will not function. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.
!
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
!
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
"
To locate the beginning of a track
Notes:
!
You can locate the beginning of a track on a single disc only.
!
The 
 / 
 or 
 / 
 button on the remote control allows you to locate the
beginning of a track.
 
"
To locate the desired portion
Notes:
!
Normal playback will resume when the 
  or 
 button is released.
!
You can locate the desired portion on a single disc only.
!
When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
!
The 
 / 
 or 
 / 
 button on the remote control allows you to locate the
desired portion.
7
Press the   /   (   ) button to start playback.
!
Playback will begin from track 1 on the disc you have selected to play. After 
that disc finishes playing, the next disc will automatically start playback.
!
When the last track on the third disc has finished playing, the CD player will 
stop automatically.
!
When there is no CD in one of the disc 1 - 3 positions, that position will be 
skipped and the next CD will be played.
To move to the beginning of the next track:
Press the 
 button for less than 0.5 seconds during playback.
!
You can skip to any track by pressing the 
 button repeatedly until the desired track 
number appears.
To restart the track being played:
Press the 
 button for less than 0.5 seconds during playback.
!
You can skip to any track by pressing the 
 button repeatedly until the desired track 
number appears.
For audible fast forward:
Press and hold down the 
 button during playback.
For audible fast reverse:
Press and hold down the 
 button during playback.
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Page of 32
Display

Click on the first or last page to see other CD-DP2400H service manuals if exist.