Sharp CD-C661H User Manual / Operation Manual ▷ View online
<P=004>
COMPACT DISC OPERATION
■
CD playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
●
CDs can be placed on any open position on the disc tray.
●
Be sure to place 8 cm (3") CD(s) in the middle of the disc
trays.
trays.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
Do not stack CDs in the tray.
This can damage the player and the CDs.
5
When loading a third disc, press the DISC SKIP button to turn
the disc tray, then place the CD in the open position.
the disc tray, then place the CD in the open position.
6
Press the OPEN/CLOSE button to close the disc tray.
●
The total number of tracks and the total playing time for one
disc will be displayed. At this time, the disc number indicator
is flashing.
disc will be displayed. At this time, the disc number indicator
is flashing.
7
Press the desired disc number button ( 1 - 3).
8
Press the
0/R
(
0R
) button.
●
Playback will begin from track 1 on the disc you have selected
to play.
to play.
●
After the disc finishes playing, the next disc will automatically
play.
play.
●
When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will be played.
position will be skipped and the next CD will be played.
●
When the last track on the third disc has finished playing, the
unit will stop automatically.
unit will stop automatically.
To interrupt playback:
①
Press the CD
6
button on the remote control.
●
"
6
" will appear.
②
Press the
0R
button to resume playback from the same
point.
To stop playback:
Press the
■
(CD
■
) button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
●
The disc tray will open. Remove the two discs. Then, press
the DISC SKIP button to rotate the disc tray and remove the
remaining disc.
the DISC SKIP button to rotate the disc tray and remove the
remaining disc.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
Caution:
●
Do not carry the unit with discs left in the disc
trays. The discs may come loose inside the
unit and they may be damaged or cause dam-
age to the unit. This may also cause malfunc-
tions.
trays. The discs may come loose inside the
unit and they may be damaged or cause dam-
age to the unit. This may also cause malfunc-
tions.
●
Do not place two CDs in one disc position.
●
Do not push the disc tray whilst it is moving.
●
Do not attempt to turn the disc tray by hand. This
may cause malfunctions.
may cause malfunctions.
●
If the power fails whilst the tray is open, wait until
the power is restored.
the power is restored.
●
If the disc tray is stopped forcibly, "ERR" will ap-
pear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to
enter the stand-by mode and then turn the power
on again.
pear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to
enter the stand-by mode and then turn the power
on again.
●
If TV or radio interference occurs during CD oper-
ation, move the unit away from the TV or radio.
ation, move the unit away from the TV or radio.
●
If a disc is damaged, dirty, or loaded upside down,
the disc will be skipped and the next disc will auto-
matically play.
the disc will be skipped and the next disc will auto-
matically play.
CD
CD
4
5
7
5 3,6
1
2
8
2
1
8
5
7
12 cm (5")
8 cm (3")
CD-C661H(SUK) TINSE0264AWZZ
8
HK
CD
DISC SKIP
RANDOM
DISC SKIP
<P=001>
(Continued)
■
Disc number selection
1
When stopped, press the DISC SKIP button.
2
Press the
0/R
(
0R
) button.
●
The next disc playback will begin, after which each following
disc will be played sequentially.
disc will be played sequentially.
Notes:
●
When the DISC SKIP button is pressed during playback, play-
back will begin automatically from the next disc. (It is not
necessary to press the
back will begin automatically from the next disc. (It is not
necessary to press the
0/R
(
0R
) button.)
●
When one of the disc number buttons ( 1- 3) is pressed
during playback, playback of the selected disc will begin auto-
matically. (It is not necessary to press the
during playback, playback of the selected disc will begin auto-
matically. (It is not necessary to press the
0/R
(
0R
) button.)
■
APSS (Auto Program Search System)
APSS automatically locates the beginning of any track.
To listen again to the track being played:
Press the
Press the
5
button for less than 0.5 seconds during playback.
To move to the beginning of the next track:
Press the
Press the
4
button for less than 0.5 seconds during playback.
●
To skip a number of tracks at one time, press the
5
or
4
button repeatedly until the desired track number is shown.
●
To start playback from a desired track, press the
5
or
4
button whilst in the stop mode to select the track number,
and then press the
and then press the
0/R
(
0R
) button.
Note:
●
APSS can only search for music on a single disc.
■
Cue and review
1
Load a disc and begin playback.
2
Hold down the
2
button for audible fast forward, and hold
down the
3
button for audible fast reverse.
3
Normal playback will resume when the
3
or
2
button is
released.
Notes:
●
When the end of the disc is reached whilst cueing, "END" will
appear in the display. (Even though the next disc has been
loaded, the disc will not be switched.)
Press the
appear in the display. (Even though the next disc has been
loaded, the disc will not be switched.)
Press the
3
button for fast reverse or press the
■
(CD
■
)
button to stop CD operation.
●
If the beginning of the disc is reached whilst reviewing, the
mode will automatically switch to normal playback at that
point.
mode will automatically switch to normal playback at that
point.
■
Random play
(Remote control operation)
The tracks on the disc(s) can be played in random order
automatically.
automatically.
1
Load a disc(s) and close the disc tray.
2
Press the RANDOM button to begin random play.
●
"R" will appear.
Notes:
●
When using random play, be sure to press the
■
(CD
■
) button after you are through listening.
Otherwise, the disc(s) will play continuously.
●
In random play the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
automatically. (You cannot select the order of the
tracks.)
To cancel random play:
Press the
0/R
(
0R
) button.
●
"R" will go out.
CD-C661H(SUK) TINSE0264AWZZ
9
<P=002>
(Continued)
■
APMS
(Automatic Programmable Music Selector)
(Automatic Programmable Music Selector)
You can playback the tracks on the CDs in the disc 1 - 3 positions
in any order desired. By specifying the disc numbers from 1 to
3, and the track numbers from 1 to 99, you can choose up to
32 selections for playback in the order you like.
in any order desired. By specifying the disc numbers from 1 to
3, and the track numbers from 1 to 99, you can choose up to
32 selections for playback in the order you like.
1
When in the stop mode, use the disc number buttons ( 1
- 3) to select the desired disc number.
- 3) to select the desired disc number.
2
Press the
5
or
4
button to select the desired track.
3
Press the MEMORY/SET (MEMORY) button.
●
"MEMORY" will appear to show that the programmed se-
quence is being entered into memory.
quence is being entered into memory.
4
Repeat steps 1 - 3 for any other track. Up to 32 tracks can
be programmed.
be programmed.
●
If you make a mistake whilst in the programming mode
("MEMORY" will appear) or if you wish to change your selec-
tions, the programmed tracks can be cleared by pressing the
CLEAR button. The tracks will be cleared sequentially, starting
with the last track entered.
("MEMORY" will appear) or if you wish to change your selec-
tions, the programmed tracks can be cleared by pressing the
CLEAR button. The tracks will be cleared sequentially, starting
with the last track entered.
5
Press the
0/R
(
0R
) button to start playback of programmed
selections.
To clear the programmed selections:
Press the CLEAR button on the remote control whilst the disc is
stopped.
stopped.
●
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed.
beginning with the last track programmed.
Notes:
●
Opening the disc tray automatically cancels the programmed
sequence.
sequence.
●
Even if you press the ON/STAND-BY button to enter the
stand-by mode or the function is changed from CD to some
other function, the programmed selections will not be cleared.
stand-by mode or the function is changed from CD to some
other function, the programmed selections will not be cleared.
●
During APMS operation, random play is not possible.
■
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be
continuously repeated.
continuously repeated.
To repeat all tracks on up to 3 discs:
Press the
0/R
(
0R
) button twice.
●
"
R
" will appear.
To repeat a programmed sequence:
1
Programme a sequence of up to 32 tracks.
2
Press the
0/R
(
0R
) button twice.
●
"
R
" will appear.
To cancel repeat play:
Press the
0/R
(
0R
) button again.
●
"
R
" will go out.
Note:
●
When using repeat play, be sure to press the
■
(CD
■
) button
after you are through listening.
Otherwise, the CD(s) will play continuously.
Otherwise, the CD(s) will play continuously.
CLEAR
3
2
5
1
2
5
3
1
Selected disc number
Selected track number
Playback order
Repeat play indicator
CD-C661H(SUK) TINSE0264AWZZ
10
<P=003>
2,3,5,6
1
4
RADIO OPERATION
■
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the desired fre-
quency band. (FM ST, FM or AM)
quency band. (FM ST, FM or AM)
4
Press the TUNING/TIME (
X
or
W
) button to tune into the
desired station.
Manual tuning:
Press the TUNING/TIME (
X
or
W
) button as many times as
required to adjust the frequency shown on the display to the
frequency of the desired station.
frequency of the desired station.
Auto tuning:
When the TUNING/TIME (
X
or
W
) button is pressed for more
than 0.5 seconds, scanning will start automatically and the tuner
will stop at the first receivable broadcast station.
will stop at the first receivable broadcast station.
Notes:
●
When radio interference occurs during auto scan tuning, auto
scan tuning may stop automatically at that point.
scan tuning may stop automatically at that point.
●
If a weak station signal is found during auto scan tuning, the
station will be skipped.
station will be skipped.
●
To stop the auto tuning, press the TUNING/TIME (
X
or
W
)
button again.
●
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator
will light, Finally, the station name will appear.
frequency will be displayed first, and then the RDS indicator
will light, Finally, the station name will appear.
5
To receive an FM stereo transmission, press the TUNER
(BAND) button so that the "ST" indicator on the display lights
up.
(BAND) button so that the "ST" indicator on the display lights
up.
●
"
j
" will appear when an FM broadcast is in stereo.
6
If the FM reception is weak, press the TUNER (BAND) button
so that the "ST" indicator goes out.
so that the "ST" indicator goes out.
●
The reception changes to monaural, the sound becomes
clearer.
clearer.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
Note:
●
The last station tuned in will be recalled, even after changing
the tuning band or the function, or after switching the unit to
the stand-by mode.
the tuning band or the function, or after switching the unit to
the stand-by mode.
(Main unit operation)
CD-C661H(SUK) TINSE0264AWZZ
11
Click on the first or last page to see other CD-C661H service manuals if exist.