DOWNLOAD Panasonic TX-40CS620E / TX-40CSR620 / TX-40CSR625 Service Manual ↓ Size: 14.77 MB | Pages: 82 in PDF or view online for FREE

1. Purpose 
    Restrict a function for hotels. 
2. Access command to the Hotel mode setup menu. 
    In order to display the Hotel mode setup menu,  
   please enter the following command (within 2 second). 
    [TV] :  Vol.[Down] + [REMOTE] : AV (3 times) 
 
    Then, the Hotel mode setup menu is displayed. 
 
 
                                                                                           
                              

 
3. To exit the “Hotel mode”: 
    Switch off the power with the [POWER] button 
    on the main unit or the [POWER] button  
    on the remote control or pressing [EXIT] button 
    on the remote control. 
  
4. Explain the Hotel mode setup menu. 

ITEM Function 

Hotel Mode 

Select hotel mode ON/OFF 

Initial INPUT 

Select input signal modes. 
Set the input, when each time power is switched on. 
Selection: 
Off/DVB-T/AV1/AV2/HDMI1/HDMI2/HDMI3 
*Off: give priority to the last memory. However, Euro  
  Model is compulsorily set to TV.  

Initial POS 

Select programme number. 
Selection: 
Off/0 to 99 
*Off: give priority to the last memory 

Initial VOL Level 

Adjust the volume when each time power is  
switched on. 
Selection/Range: 
Off/0 to 100 
*Off: give priority to the last memory 

Maximum VOL 
Level 

Adjust maximum volume. 
Range: 
0 to 100 

Button Lock 

Select local key conditions. 
Selection: 
Off/SETUP/MENU 
*Off: altogether valid 
*Setup: only F-key is invalid 

(Tuning guide (menu) can not be selected.) 

*MENU: only F-key is invalid 

(only Volume/Mute can be selected.) 

Remote Lock 

Select remote control key conditions. 
Selected” 
Off/SETUP/MENU 
*Off: altogether valid 
*Setup: only Setup menu is invalid 
MENU: Picture/Sound/Setup menu are invalid 

Private 
Information 

Select private information for VIERA Cast is Keep or 
Reset if Hotel mode is set to [On] when TV power 
on. 
Selection : 
Keep/Reset 
•Keep: private information for VIERA Cast is keep 
•Reset: private information for VIERA Cast is reset 

Hotel mode 

Hotel mode 

Off 

nitial INPUT

Off 

Initial POS 

Off 

Initial VOL Level 

Off 

Maximum VOL Level 

100

Button Lock 

Off 

Remote Lock 

Off 

Private Information 

Keep 

Select 

RETURN 

Change 

    When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.  

    When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and the 
copy 
    to other TVs. 

Make pwd file as startup file for (a) or (b) in an empty USB Memory. 

1.  Insert an empty USB Memory to your PC. 
2.  Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created 

by default (New Text Document.txt). 

3.  Right-click the new text document that you just created and select rename, and then change the name and 

extension of the file to the following file name (a) or (b) and press ENTER. 

 
File name: 

(a)  For Board replacement: boardreplace.pwd 
(b)  For Hotel: hotel.pwd 

 
Note: 
       Please make only one file to prevent the operation error. 
       No any other file should be in USB Memory. 

(After exchanging) 

Copy back from USB Memory

TV 

A-board 

USB 

(Before exchanging) 

Copy to USB Memory

Following data can be copied. 
  User setting data 
  (inc. Hotel mode setting data) 
  Channel scan data 
  Adjustment and factory preset data 

Master TV 

Other TV 

Other TV 

Copy to USB Memory 

Copy from USB Memory 

USB 

Memory 

Following data can be copied. 
  User setting data 
  (inc. Hotel mode setting data) 
  Channel scan data 
   
   

Other TV 

1.  Turn on the TV set. 
2.  Insert USB Memory with a startup file (pwd file) to USB Terminal. 

On-screen Display will be appeared according to the startup file automatically. 

3.  Input a following password for (a) or (b) by using remote control. 

(a)  For Board replacement: 2770 
(b)  For Hotel: 4850 

             Data will be copied from TV set to USB Memory. 
             It takes around 2 to 6 minutes maximum for copying. 

4.  After the completion of copying to USB Memory, remove USB Memory from TV set. 
5.  Turn off the TV set. 

 
Note: 
      Following new folder will be created in USB Memory for data from TV set. 

(a)  For Board replacement: user_setup 
(b)  For Hotel: hotel 

Data copy 
(Board replacement) or (Hotel) 

Input Password 
2770   or   4850 

Performing    

Completion          

Data Copy(Board replacement ) 

Input  password  

----- 

Data Copy(Board replacement ) 

Input  password  

----- 

Data Copy(Board replacement ) 

Copy TV to Media 

Please wait for a while 

Please do not remove the Media 

GETTING

Data Copy(Board replacement ) 

 

Data copy has been successful 

Please remove Media  

FINISH 

1.  Turn on the TV set. 
2.  Insert USB Memory with Data to USB Terminal. 

On-screen Display will be appeared according to the Data folder automatically. 

3.  Input a following password for (a) or (b) by using remote control. 

(a)  For Board replacement: 2771 
(b)  For Hotel: 4851 

            Data will be copied from USB Memory to TV set. 

4.  After the completion of copying to USB Memory, remove USB Memory from TV set. 

(a)  For Board replacement: Data will be deleted after copying (Limited one copy). 
(b)  For Hotel: Data will not be deleted and can be used for other TVs. 

5.  Turn off the TV set. 

 
Note: 

1.  Depending on the failure of boards, function of Data for board replacement does not work. 
2.  This function can be effective among the same model numbers. 

Input Password 
2771   or   4851 

Performing    

Data Copy(Board replacement ) 

Input  password  

----- 

Data Copy(Board replacement ) 

Copy Media to TV 

Please wait for a while 

Please do not remove the Media 

 

WRITING

Data Copy(Board replacement ) 

 

Data copy has been successful 

Please turn off the TV for system 

initializing  

FINISH