Panasonic TH-65SF2U / TH-65SF2E / TH-65SF2W (serv.man2) Service Manual ▷ View online
ADJ-7
SECTION 3 ADJUSTMENTS
<65SF2U/W/E>
2. Input the IP Address and Connection Port
・
Set up the IP Address and Connection Port of connected the Display
unit.
3. Press the [Find] button, and Explorer opens
・
Select the data file to update,
press [Open].
・
Set up the Display unit to the following
Network settings menu / Network control : On
Options menu / LAN control protocol :Protocol 2
A preservation place of the data file
is displayed in full path.
Firmware (or data) name
and a version (included in
the data file) are displayed.
※
For firmware (or data) name, refer to the item
[Updatable firmware list].
ADJ-8
SECTION 3 ADJUSTMENTS
<65SF2U/W/E>
4. Press the [Connection Check] button
It connects to the Display unit and displays the model information.
※
※
This operation is omissible for update.
・
”Connecting” is displayed during the connection
confirmation with the Display unit.
・
Succeed in connection, the Display unit information is
displayed. (Model name, Version, Serial number)
・
Confirmation is over, Press the [CLOSE] button.
5. Press the [Update] button, Send the selected data file.
・
Connection to the Display unit.
・
The confirmation window of upload will
appear and then click [OK] to start updating.
Original version of firmware
New version of firmware
ADJ-9
SECTION 3 ADJUSTMENTS
<65SF2U/W/E>
・
Writing status displays on the window.
・
After finishing the updating, return to the main screen.
6. Press the [CLOSE] button, and close the Update Tool.
ADJ-10
SECTION 3 ADJUSTMENTS
<65SF2U/W/E>
7. ERROR, MESSAGE LIST
Error code
Message
Remarks
Errors detected by tool side
1
Application Internal Error.
Select the data file.
2
Connection Error.
Please check the network.
Check the IP Address and Command
Port.
Check the list of the Display units
compatible with the update tool.
3
Update file transmission failed.
Network failure.
6
Update file is not correct.
Please check the update file.
CRC Error.
Unsupported firmware
Errors detected by the Display unit side
8
Update file is not correct.
Please check the update file.
Incorrect header information.
9
Update file transportation failed.
Network failure.
10
Update file is not correct.
Please check the update file.
CRC Error.
11
Status Error.
Please check the display.
Check the state of the Display unit, such
as power supply.
12
Update failed.
Check the file and try again.
13
Update failed.
Timeout of update.
Message
14
Software upgrades were NOT done.
Please check the file version and try
again.
The same version or new version has
already been written.
7. ERROR, MESSAGE LIST
Error code
Message
Remarks
Errors detected by tool side
1
Application Internal Error.
Select the data file.
2
Connection Error.
Please check the network.
Check the IP Address and Command
Port.
Check the list of the Display units
compatible with the update tool.
3
Update file transmission failed.
Network failure.
6
Update file is not correct.
Please check the update file.
CRC Error.
Unsupported firmware
Errors detected by the Display unit side
8
Update file is not correct.
Please check the update file.
Incorrect header information.
9
Update file transportation failed.
Network failure.
10
Update file is not correct.
Please check the update file.
CRC Error.
11
Status Error.
Please check the display.
Check the state of the Display unit, such
as power supply.
12
Update failed.
Check the file and try again.
13
Update failed.
Timeout of update.
Message
14
Software upgrades were NOT done.
Please check the file version and try
again.
The same version or new version has
already been written.
* When an error or notification occurs,
the screen on the left is displayed.
7.ERROR、MESSAGE表示
ツール使用中にエラー
(ERRRO)又は
お知らせ
(MESSAGE)が発生すると左
記画面(例)が表示されます。
Click on the first or last page to see other TH-65SF2U / TH-65SF2E / TH-65SF2W (serv.man2) service manuals if exist.