Panasonic KX-TCD965GC Service Manual ▷ View online
KX-TCD965GC
9
OPERATION
MAKING CALLS
TURNING THE POWER ON
Press
firmly.
• After all possible configurations briefly appear, the display will
change to the following. Then the handset is in the stand-by mode.
• You can choose whether to display the base unit number, handset
number or no display in the stand-by mode by programming.
To turn the power OFF, press and hold
until a beep sounds.
• The display will go blank.
• The handset will not ring.
• The handset will not ring.
• Depending on the programming mode, you may not be able to turn the power off. First make sure the handset is set to the
stand-by mode.
Make sure that the power is ON.
1
Press
.
•
"
" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
3
To hang up, press
or place the handset on the base unit.
•
The handset will return to the stand-by mode.
1 The number of new Caller ID calls received.
2 The current connected base unit number.
1
2
0 New Calls
Base 1
•
After a few seconds, the display will start showing the length of the call.
12345678
00-00-00
Display
Power Butto
10
KX-TCD965GC
TO DIAL AFTER CONFIRMING THE ENTERED NUMBER
With this feature you are able to confirm the entered number, before you start dialling.
1
Enter a phone number.
• The entered number is displayed.
• If you misdial, press
. Digits are erased from the right.
• To cancel, press
firmly.
2
Press
.
• “
” is displayed.
• After a few seconds, the display will start showing the length of the call.
3
To hang up, press
or place the handset on the base unit.
• The handset will return to the stand-by mode.
• If “
• If “
” flashes and an alarm tone sounds after pressing
, move closer to the base unit. Then try again.
• You can choose whether to display either the length of the call, call charge or phone number in the talk mode by
programming.
programming.
1
Press
.
2
Press
F
.
3
While “
Redial
” is at the arrow, press OK .
• The last number dialed is automatically redialed.
TO REDIAL THE LAST NUMBER DIALLED
TO REDIAL AFTER CONFIRMING THE NUMBERS IN REDIAL MEMORY
The unit automatically stores the last 10 numbers dialled into redial memory.
1
Press
F
.
2
While “
Redial
” is at the arrow, press OK .
• The last number dialled is displayed.
3
Press or until the desired number is displayed.
• To search from the most recent to oldest number, press . To search from the oldest to most recent number, press .
• When the number at the top of the redial memory is displayed, two beeps will sound.
• When the number at the top of the redial memory is displayed, two beeps will sound.
• To exit the list, press
C
.
4
Press
.
• The number is dialled automatically.
• If “
No Stored Memory
” is displayed in step 2, the redial memory is empty.
• If the same phone number is stored in the phonebook, the name will be displayed.
Redial
Caller ID
New Phonebook
Redial
Go Back
KX-TCD965GC
11
SETTING THE RECEIVER VOLUME
TO SELECT THE RECEIVER VOLUME
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM.
While talking, press or to select the desired level.
• The display shows the volume level.
Ex. LOW is selected.
• After a few seconds, the display will return to the length of the call.
OR
In the stand-by mode, proceed as follows.
1 Press
F
.
2 Press or until the arrow points to "
Program
", then press OK .
3 Press or until the arrow points to "
Receiver Volume
", then press OK .
4 Press or to select the desired level.
5 Press OK .
• The display will return to "
Receiver Volume
". To return to the stand-by mode, press
C
or wait for 60 seconds.
ANSWERING CALLS
Make sure that the power is ON, otherwise the handset will not ring.
If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring. Please wait until the
second ring to answer a call in order to view the Caller ID information.
second ring to answer a call in order to view the Caller ID information.
1
Press
.
• You can also answer a call by pressing any dialing button
0
to
9
,
or
(—Any Key Talk).
2
To hang up, press
or place the handset on the base unit.
• The handset and base unit will not ring if both ringer volumes are set to OFF.
Receiver Volume
- +
12
KX-TCD965GC
1 Press
F
.
2 Press or until the arrow points to "
Program
", then press OK .
3 Press or until the arrow points to "
Setting Handset
", then press OK .
4 Press or until the arrow points to "
Ringer Volume
", then press OK .
•
The current volume is displayed and rings.
5 Press or to select the desired level.
•
Each time you press a button, the selected volume is displayed and rings.
•
To set to OFF, erase " " by pressing until "
OFF
" is displayed.
6 Press OK .
•
A confirmation tone sounds.
•
The display will return to "
Ringer Volume
". To return to the stand-by mode, press
C
or wait for 60 seconds.
•
When set to OFF, "
Ringer Off
" will be displayed.
SELECTING THE HANDSET RINGER VOLUME
You can program the desired handset ringer volume. Make sure that the power is on and the unit is in the stand-by mode.
6 levels are available. The lowest level is 1. The highest level is 6. The factory preset is 3. When set to OFF, the handset will
not ring.
6 levels are available. The lowest level is 1. The highest level is 6. The factory preset is 3. When set to OFF, the handset will
not ring.
SELECTING THE BASE UNIT RINGER VOLUME
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM. When set to OFF, the base unit will not ring.
Make sure that the power is ON and the unit is in the stand-by mode.
Make sure that the power is ON and the unit is in the stand-by mode.
1 Press
F
.
2 Press or until the arrow points to "
Program
", then press OK .
3 Press or until the arrow points to "
Setting Base
", then press OK .
•
"
Input Command
" is displayed.
4 Press
2
TWICE.
•
The current volume is displayed.
1: LOW 2: MEDIUM 3: HIGH 0: OFF
5 Press the desired volume level
1
,
2
,
3
or
0
.
•
Each time you press a button, the selected volume is displayed and rings.
6 Press OK .
•
A confirmation tone sounds.
•
The display will return to "
Setting Base
". To return to the stand-by mode, press
C
or wait for 60 seconds.
Ringer Volume
- +
Click on the first or last page to see other KX-TCD965GC service manuals if exist.