Panasonic KX-TCD961GB Service Manual ▷ View online
9
KX-TCD961GB
OPERATION
MAKING CALLS
TURNING THE POWER ON
Press
firmly.
• After all possible configurations briefly appear, the display will change to the following. Then the handset is in the
stand-by mode.
The current connected base unit number is displayed.
• You can choose whether to display the base unit number, handset number or no display in the stand-by mode by
programming.
programming.
To turn the power OFF, press and hold
until a beep sounds.
• The display will go blank.
• The handset will not ring.
• The handset will not ring.
• Depending on the programming mode, you may not be able to turn the power off. First make sure the handset is set to the
stand-by mode.
Make sure that the power is ON.
1
Press
.
•
"
" is displayed.
2
Dial a phone number.
• The dialed number is displayed.
3
To hang up, press
or place the handset on the base unit.
•
The handset will return to the stand-by mode.
•
After a few seconds, the display will start showing the length of the call.
KX-TCD961GB
10
TO DIAL AFTER CONFIRMING THE ENTERED NUMBER
1
Enter a phone number.
• The entered number is displayed.
• If you misdial, press
C
. Digits are erased from the right.
• To cancel, press
C
firmly.
2
Press
.
• After a few seconds, the display will start showing the length of the call.
3
To hang up, press
or place the handset on the base unit.
• The handset will return to the stand-by mode.
• If “
• If “
” flashes and an alarm tone sounds after pressing
, move closer to the base unit. Then try again.
• You can choose whether to display the length of the call, call charge or phone number in the talk mode by programming.
TO REDIAL THE LAST NUMBER DIALLED
Press
.
• The last number dialed is automatically redialed.
TO REDIAL AFTER CONFIRMING THE NUMBERS IN REDIAL MEMORY
The unit automatically stores the last 10 numbers dialed into redial memory.
1
Press
.
• The last number dialed is displayed.
2
Select the desired number by pressing
.
• You can also search from the most recent to oldest number by pressing . To search from the oldest to most
recent number, press .
• “
” denotes the end of redial memory.
• To exit the list, press
C
firmly.
3
Press
.
• The number is dialed automatically.
With this feature you are able to confirm the entered number, before you start dialing.
11
KX-TCD961GB
SETTING THE RECEIVER VOLUME
TO SELECT THE RECEIVER VOLUME
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM.
While talking, press or to select the desired level.
• The display shows the volume level.
Ex. LOW is selected.
• After a few seconds, the display will return to the length of the call.
OR
In the stand-by mode, proceed as follows.
ANSWERING CALLS
Make sure that the power is ON, otherwise the handset will not ring.
If the handset is off the base unit, press
.
• You can also answer a call by pressing any dialing button
0
to
9
,
or
(—Any Key Talk).
OR
If on the base unit, just lift up.
• The handset and base unit will not ring if both ringer volumes are set to OFF.
1 Press
.
2 Press or until "
" is displayed, then press
OK
.
• The current level is displayed.
Ex. LOW is selected.
3 Press or to select the desired level.
4 Press
.
KX-TCD961GB
12
SELECTING THE HANDSET RINGER VOLUME
Ringer volume
1 Press
then
I N T
.
2 Press 2 TWICE.
•
The current volume is displayed.
1: LOW 2: MEDIUM 3: HIGH 0: OFF
Ex. MEDIUM is selected.
4 Press the desired volume level 1 , 2 , 3 or 0 .
•
Each time you press a button, the selected volume is displayed and rings.
5 Press
.
•
A confirmation tone sounds and the display will return to the stand-by mode.
SELECTING THE BASE UNIT RINGER VOLUME
Ringer volume
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM. When set to OFF, the base unit
will not ring.
1
Press .
2
Press or until " " is displayed.
3
Press .
•
The current volume is displayed and rings.
4
Press or to select the desired level.
•
Each time you press a button, the selected volume is displayed and rings.
•
To set to OFF, erase " " by pressing until " " is displayed.
5
Press .
•
A confirmation tone sounds and the display will return to the stand-by mode.
•
When set to OFF, " " will be displayed.
OK
Ex. Level 3 is selected.
6 levels are available. The lowest level is 1. The highest level is 6. The factory preset is 3. When set to OFF,
the handset will not ring.
the handset will not ring.
Click on the first or last page to see other KX-TCD961GB service manuals if exist.