Panasonic KX-TCD510RUM / KX-TCD510RUT / KX-TCD510RUV / KX-TCD512RUM / KX-TCD512RUT / KX-TCD512RUV Service Manual ▷ View online
6.6. Reset
6.6.1. Base Unit
You can reset all of the base unit settings to their initial settings.
·
To exit the operation, press
any time.
Base Unit Initial Settings
Function
Initial Setting
Remarks (selectable options)
Dial Mode
Pulse
Tone / Pulse
Recall Time
Type 2 (700 ms)
Type 1 (100 ms) / Type 2 (700 ms) / Type
3 (200 ms)
3 (200 ms)
Pause Time
Short (3 seconds)
3 seconds / 5 seconds
Emergency Call Number 1
03
-
Emergency Call Number 2
01
-
Emergency Call Number 3
02
-
Emergency Call Number 4
04
-
Call Restricted Handset(s)
Delete All
-
Call Restriction Number(s)
Delete All
-
4-Digit Base Unit PIN
0000
-
Base Unit Ringer Volume
Medium
High / Medium / Low / OFF
Caller ID List
Delete All
-
Carrier Code
Delete All
-
Area Code
Delete All
-
Relation of Area Code
Delete All
-
Date/Time
31-12-03/00:00
-
Caller ID Mode
Russian
Russian / Western
No. of Digits
7 digits
4 to 7
Answering System
ON
ON / OFF
Your Own Greeting Message
Remain
-
Caller’s Recording Time
No Limit
Greeting Only / 1 min / No Limit
Number of Rings
4 Rings
2 ~ 9 Rings
Greeting Monitor
ON
ON / OFF
Remote Code
Delete (OFF)
000 ~ 999 / OFF (
)
Incoming/Memo Message(s)
Remain
-
6.6.2. Handset
You can reset all of the handset settings to their initial settings.
·
To exit the operation, press
at any time.
17
KX-TCD510RUM / KX-TCD510R UT / KX-TCD510R UV / KX-TCD512R UM / KX-TCD512R UT / KX-TCD512RUV
Handset Initial Settings
Function
Initial Setting
Remarks (selectable options)
Memo Alarm Mode
OFF
OFF / Once / Daily
Alarm Time
Delete
-
Handset Ringer Volume
6
1 to 6
Handset External Ringer Pattern
1
1 to 15
Handset Internal Ringer Pattern
1
1 to 15
Handset Paging Tone Pattern
1
1 to 15
Handset Private Ringer Pattern
1
1 to 15
Handset Alarm Tone Pattern
1
1 to 15
Key Tone
ON
ON / OFF
Standby Mode Display
Handset Name
Base Number / Handset Name / OFF
Talk Mode Display
Talk Time
Talk Time / Charge / Phone Number
Display Language
Russian
20 languages
Call Bar Mode
OFF
ON / OFF
Direct Call Mode
OFF
ON / OFF
Direct Call Number
Delete
-
4-Digit Handset PIN
0000
-
Auto Talk
OFF
ON / OFF
Select Base
Automatic Base Unit Selection
Auto / Base 1
Redial Memory
Delete All
-
Handset Receiver Volume
Medium
Low / Medium / High
Walkie-Talkie Setting
Group
Common / Group
Phonebook List
Remain
-
LED Colour of Private Category
Green
Green / Orange / Red
Battery Type
Ni-MH
Ni-MH / Ni-Cd
6.7. Key Lock
Note for Service:
The key lock is cancelled if the handset is turned off.
6.8. Recall Feature
6.9. Dialling Pause for PBX line/long distance service users
A dialling pause is used when a pause in the dialling of a phone number is necessary using a PBX or accessing a long distance
service.
service.
For example, when 9 (line access number) is dialled followed by a pause to access an outside line through a PBX:
·
Entering a pause prevents misdialling when you redial or dial a stored number.
·
Pressing RIGHT SOFT KEY more than once increases the length of the pause between numbers.
18
KX-TCD510RUM / KX-TCD510R UT / KX-TCD510R UV / KX-TCD512R UM / KX-TCD512R UT / KX-TCD512RUV
6.10. Call Restriction
You can restrict selected handset(s) from dialling selected phone numbers. You can assign up to 6 call restriction numbers (up
to 8 digits). If you dial a restricted number, the call does not connect and the restricted number flashes.
to 8 digits). If you dial a restricted number, the call does not connect and the restricted number flashes.
·
To exit the operation, press
at any time.
Note:
When you put a first digit on step 9, it must overwrite the current displayed numbers. We recommend you to write
down the restricted phone number you entered.
down the restricted phone number you entered.
6.11. Call BAR On/Off (Call Prohibition On/Off)
When this feature is set to ON, outgoing calls cannot be made. Intercom calls and calls to numbers assigned as emergency
numbers can be made.
numbers can be made.
·
To exit the operation, press
at any time.
·
While the Call Bar mode is turned on, “
“ is displayed.
19
KX-TCD510RUM / KX-TCD510R UT / KX-TCD510R UV / KX-TCD512R UM / KX-TCD512R UT / KX-TCD512RUV
Note for Service:
6.12. Selecting the Display Language
You can select one of 20 languages. The factory preset is Russian.
·
To exit the operation, press
at any time.
6.13. Selecting the Dialling Mode (Tone/Pulse)
You can change the dialling mode to tone or pulse depending upon your Telephone company. If you have a touch tone service,
select
select
. If you have rotary or pulse service, select
.
20
KX-TCD510RUM / KX-TCD510R UT / KX-TCD510R UV / KX-TCD512R UM / KX-TCD512R UT / KX-TCD512RUV
Click on the first or last page to see other KX-TCD510RUM / KX-TCD510RUT / KX-TCD510RUV / KX-TCD512RUM / KX-TCD512RUT / KX-TCD512RUV service manuals if exist.