Panasonic KX-TCD460UA / KX-A146UA-1 / KX-A146UA Service Manual ▷ View online
5.3. Battery Life
After your Panasonic batteries are fully charged, you can expect the following performance:
Note:
·
The included batteries are Ni-MH batteries.
·
Battery operating time may be shortened depending on usage conditions and ambient temperature.
5.4. Battery Replacement
If
flashes even when the handset batteries have been fully charged, both batteries must be replaced.
Important:
·
Please use only the Panasonic batteries P03P(Ni-MH)/P03H(Ni-Cd).
·
Use only rechargeable batteries. If you install non-rechargeable batteries and start charging, the batteries may leak
electrolyte.
electrolyte.
·
Do not mix old and new batteries.
·
Use only 2 nickel metal hydride (Ni-MH) batteries or 2 nickel cadmium (Ni-Cd) batteries. Do not mix battery types.
·
Ensure that the correct battery type is selected.
1. Press the notch on the cover firmly and slide it in the direction of the arrow.
2. Remove the batteries positive (+) terminal first. Replace both batteries.
Note for Service:
·
When Ni-Cd batteries are fitted with the
setting in
,
icon might disappear and stop charging
even if the handset is on the cradle for avoiding overcharge.
9
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
6 LOCATION OF CONTROLS
6.1. Base Unit
6.2. Handset
10
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
Important information
7 SETTINGS
General
·
Use only the power supply included with this products.
·
Do not connect the AC adaptor to any AC outlet other than a standard 220 — 240 V AC outlet.
·
This product is unable to make calls when:
−
−
−
−
The portable handset batteries need recharging or have failed.
−
−
−
−
There is a power failure.
−
−
−
−
The key lock feature is turned on.
−
−
−
−
The call bar feature is turned on (only numbers stored as emergency numbers can be called).
·
Do not open the base unit or handset (other than to change the batteries).
·
This product should not be used near emergency/intensive care medical equipment and should not be used by people with
pacemakers.
pacemakers.
·
Care should be taken that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this product to
excessive smoke, dust, mechanical vibration or shock.
excessive smoke, dust, mechanical vibration or shock.
Environment
·
Do not use this product near water.
·
This product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms
where the temperature is less than 5 °C or greater than 40 °C.
where the temperature is less than 5 °C or greater than 40 °C.
·
The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is located/installed near the unit and is
easily accessible.
easily accessible.
Location
For maximum distance and noise-free operation, place your base unit:
- Away from electrical appliances such as TVs, radios, personal computers or other phones.
- In a convenient, high and central location.
Warning:
·
To prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture.
7.1. Connections
7.1.1. Base Unit
·
If the handset is not charged, you cannot make or answer calls.
·
Never install telephone wiring during a lightning storm.
·
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)
·
Use only the AC adaptor PQLV19CEZ.
11
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
7.1.2. Charger Unit
·
The AC adaptor must remain connected at all times (It is normal for the adaptor to feel warm during use).
·
Use only the AC adaptor PQLV200CEZ.
7.2. Ringer Volume
7.2.1. Base Unit
7.2.2. Handset
12
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
Click on the first or last page to see other KX-TCD460UA / KX-A146UA-1 / KX-A146UA service manuals if exist.