Panasonic KX-TCD460UA / KX-A146UA-1 / KX-A146UA Service Manual ▷ View online
10 DISASSEMBLY INSTRUCTIONS
10.1. Base Unit
Shown in Fig.-
To Remove
Remove
1
Lower Cabinet
Screws (2.6 × 12)..........(A) × 2
2
Main P.C. Board
Main P.C. Board
29
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
10.2. Handset
Shown in Fig.-
To Remove
Remove
3
Rear Cabinet
Screws (2 × 10)..........(B) × 2
4
Rear Cabinet
Follow the procedure.
5
Main P.C. Board
Screw (2 × 8)..............(C ) × 1
Screws (2 × 8).............(D ) × 2
Main P.C. Board
Screws (2 × 8).............(D ) × 2
Main P.C. Board
30
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
10.3. Charger Unit
Shown in Fig.-
To Remove
Remove
6
Lower Cabinet
Screws (2.6 × 14)..........(E) × 2
7
Main P.C. Board
Tape and Solder
Main P.C. Board
Main P.C. Board
31
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
11 ASSEMBLY INSTRUCTIONS
11.1. Warning When Constructing the Base Unit
OK
NG
Rib
CHG terminal is properly fit in the cabinet.
CHG terminal comes out of rib by pulling black lead wire when opening the cabinet and turning
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
the PCB over. The terminal cannot have enough elastic force, cannot have good contact with
handset, and it will result in charge problem.
32
KX-TCD460UA / KX-A146UA-1 / KX-A146UA
Click on the first or last page to see other KX-TCD460UA / KX-A146UA-1 / KX-A146UA service manuals if exist.