Panasonic PT-VW355N / PT-VW355ND / T-VW355NT / PT-VX425N / PT-VX425ND / PT-VX425NT (serv.man2) Service Manual ▷ View online
INF-5
SECTION 1 SERVICE INFORMATION
1.4 Remote controls
About your projector
Remote control
This jack is not used for these
projector models.
1
2
3
5
6
7
8
9
4
10
11
12
12
13
14
15
16
17
18
19
20
20
21
22
23
24
25
25
27
28
26
29
1 Remote control signal emitters
2 Power on <b> button
2 Power on <b> button
Turn the projector on.
3 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
projecting the image. In addition, it acts as <CANCEL>
button when using the MEMORY VIEWER function.
(x page 49)
4 <MENU> button
Open or close the On-Screen Menu. (x page 56)
5 <ENTER> button/asq(VOL -) w(VOL+) buttons
Navigate the menu display.
Adjust the volume.
Adjust the volume.
6 <DEFAULT> button
Resets the content of the sub-menu to the factory
default.
(x page 57)
Or deletes one character when you enter an IP address
or a text.
7 <COMPUTER 2> button
Switches the COMPUTER2 signal to project.
8 <COMPUTER 1> button
Switches the COMPUTER1 signal to project.
9 <MIRRORING> button
Switches the MIRRORING signal to project.
(x page 51)
10 <MEMORY VIEWER> button
Switches the MEMORY VIEWER signal to project.
(x page 50)
11 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
remote control for a system using multiple projectors.
(x page 29)
12 <ID SET> button
Sets the ID number of the remote control to use for a
system using multiple projectors.
system using multiple projectors.
(x page 29)
13 <D.ZOOM +/-> buttons
Zoom in and out the images.
(x page 52)
14 <PAGE UP/PAGE DOWN> buttons
You can page up or page down files such as PowerPoint
through "Wireless Manager ME6.3". (x page 51)
15 <MUTE> button
Used to mute the audio.
(x page 54)
16 <P IN P> button (Only for PT-VW355N)
Operate the P IN P function. (x page 53)
17 <ON/OFF> switch
When using the remote control, set this switch to “ON”.
Set it to “OFF” to avoid misoperation when it is not in use.
18 Power standby <v> button
Turn the projector off.
19 Remote control indicator
Flashes if any button in the remote control is pressed.
20 <KEYSTONE> button
Correct keystone distortion. (x page 49)
21 <RETURN> button
Return to the previous menu or cancel the setting.
22 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
23 <HDMI> button
Switches the HDMI signal to project.
24 <Panasonic APP> button
Switches the Panasonic APPLICATION signal to project.
25 <VIDEO/S-VIDEO> button
Switches the VIDEO signal or S-VIDEO signal to project.
26 <FREEZE> button
Pauses the projected image and mute the audio
temporarily.
temporarily.
(x page 53)
27 Number buttons
Act as number buttons. Use these buttons when setting
the remote control codes or entering the password.
the remote control codes or entering the password.
28
<P-TIMER> button
Operate the P-TIMER function. (x page 54)
29 <AV MUTE> button
Used to turn off the audio and video temporarily.
(x page 53)
ENGLISH
- 25
Chapter 1 Preparation - About your projector
INF-6
SECTION 1 SERVICE INFORMATION
2. Menu Navigation
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
1) Press the <MENU> button on the remote control or the control panel.
f The main menu screen appears.
2) Press as to select an item from the main menu.
f The selected item is highlighted in yellow.
3) Press the <ENTER> button.
f
The sub-menu is displayed, and sub-menu items become selectable.
4) Press as to select the desired sub-menu item, press qw or the <ENTER> button to set or adjust settings.
f Some items will switch in order as follows each time you press
qw
.
A
B
C
f
For some items, press qw to display an individual adjustment screen with a bar scale as shown below.
56 - ENGLISH
Chapter 4 Settings - Menu Navigation
INF-7
SECTION 1 SERVICE INFORMATION
Note
f
Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME
LOCK] may not be displayed depending on the input signal.
f Some items can be adjusted even if signals are not input.
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f
For menu items, refer to “Main menu” (x page 57) and “Sub-menu” (x page 58).
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory
default settings.
default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute the [PROJECTOR
SETUP] menu → [INITIALIZE ALL] (x page 84).
f
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
Main-menu item
Page
[PICTURE]
60
[POSITION]
65
[LANGUAGE]
69
[DISPLAY OPTION]
70
[PROJECTOR SETUP]
77
[SECURITY]
85
[NETWORK/USB]
88
ENGLISH
- 57
Chapter 4 Settings - Menu Navigation
INF-8
SECTION 1 SERVICE INFORMATION
Sub-menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the sub-menu.
[PICTURE]
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]
60
[CONTRAST]
[0]
60
[BRIGHTNESS]
[0]
61
[COLOR]*
1
[0]
61
[TINT]*
1
[0]
61
[SHARPNESS]
[8]
61
[COLOR TEMPERATURE]
[DEFAULT]
62
[IRIS]
[OFF]*
2
62
[ADVANCED MENU]
-
62
[DAYLIGHT VIEW]
[AUTO]
63
[DIGITAL CINEMA REALITY]
[ON]
63
[NOISE REDUCTION]*
3
[OFF]
63
[TV-SYSTEM]*
3
[AUTO]
64
[RGB/YP
B
P
R
]/[RGB/YC
B
C
R
]*
4
[AUTO]
64
*1 Only for movie-based signals.
*2 It may be different depending on the input signal.
*3 Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected.
*4 Only when the <COMPUTER 1 IN>/<HDMI IN> terminal is selected.
*2 It may be different depending on the input signal.
*3 Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected.
*4 Only when the <COMPUTER 1 IN>/<HDMI IN> terminal is selected.
Note
f The factory default settings may vary depending on the picture mode.
[POSITION]
Sub-menu item
Factory default
Page
[KEYSTONE]
-
65
[SHIFT]
-
66
[DOT CLOCK]*
1
[0]
67
[CLOCK PHASE]*
1
[0]
67
[OVER SCAN]
-
67
[ASPECT]
-
68
[FRAME LOCK]*
1
[OFF]
68
*1 Only for still image signals.
[LANGUAGE]
[DISPLAY OPTION]
Sub-menu item
Factory default
Page
[ON-SCREEN DISPLAY]
-
70
[HDMI SIGNAL LEVEL]
[AUTO]
71
[CLOSED CAPTION
SETTING]
SETTING]
-
71
[SCREEN SETTING]*
1
-
72
[STARTUP LOGO]
[DEFAULT LOGO]
72
[AUTO SETUP SETTING]
[AUTO]
73
[SIGNAL SEARCH]
[ON]
73
[BACK COLOR]
[BLUE]
73
[WIDE MODE]
-
73
[SXGA MODE]
-
73
[P-TIMER]
-
74
[P IN P]*
1
-
75
[OTHER FUNCTIONS]
-
75
*1 Only for PT-VW355N.
58 - ENGLISH
Chapter 4 Settings - Menu Navigation
● Various menus, settings, adjustment screens, control button names, etc., are displayed in the selected language.
● The language can be changed to English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh, Vietnamese,
Chinese, Korean,Japanese and Thai.
Norwegian, Danish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh, Vietnamese,
Chinese, Korean,Japanese and Thai.
Click on the first or last page to see other PT-VW355N / PT-VW355ND / T-VW355NT / PT-VX425N / PT-VX425ND / PT-VX425NT (serv.man2) service manuals if exist.