Panasonic PT-RZ575 (serv.man4) Service Manual ▷ View online
9
PREFACE
< RZ575 >
2.4. Dimensions
Unit: mm
210 (8-9/32")
249 (9-13/16")
498 (19-5/8")
372.5 (14-21/32")
420 (16-17/32")
13 (1/2")
94 (3-11/16")
168 (6-5/8")
21 (13/16")
460 (18-1/8")
* Actual dimensions may differ depending on the product.
SECTION
1
INF-1
CONTENTS
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1.1 Projector body
1.2 Control panel
1.3 Connecting terminals
1.4 Remote controls
1.2 Control panel
1.3 Connecting terminals
1.4 Remote controls
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-5
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-9
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-9
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
4. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-17
4. 1. Before service operation
4. 2. Service
4. 3. Security password
4. 2. Service
4. 3. Security password
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-19
5. 1. Power/Light source/Temperature indicators
5. 2. Shutdown system
5. 3. System log data acquisition method
5. 4. Troubleshooting
5. 2. Shutdown system
5. 3. System log data acquisition method
5. 4. Troubleshooting
SECTION 1 SERVICE INFORMATION
INF-2
SECTION 1 SERVICE INFORMATION
< RZ575 >
1. The name of each part
1.1 Projector body
1 2 3 4
6
6
8
7
5
7
7
7
14
15
12
11
8
9
13
Front
Side
Rear
16
7
10
Bottom
Top
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
2 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
3 Light source indicator <LIGHT>
3 Light source indicator <LIGHT>
Indicates the status of the light source.
4 Temperature indicator <TEMP>
4 Temperature indicator <TEMP>
Indicates the internal temperature status.
5 Projection lens
6 Adjustable feet
5 Projection lens
6 Adjustable feet
Adjusts the projection angle.
7 Air intake port
8 Air exhaust port
9 Remote control signal receiver (rear)
8 Air exhaust port
9 Remote control signal receiver (rear)
10 Luminance sensor
This is a sensor to detect the luminance of the installed
environment.
11 Control panel
12 Connecting terminals
13 Security slot
12 Connecting terminals
13 Security slot
This security slot is compatible with the Kensington security
cables.
14 <MAIN POWER> switch
Turns on/off the main power.
Projection direction
15 <AC IN> terminal
Connect the supplied power cord.
16 Burglar hook port
Attaches a burglar prevention cable, etc.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
INF-3
SECTION 1 SERVICE INFORMATION
< RZ575 >
3
4
1
2
1 Power <v/b> button
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is
switched off (standby mode).
2 <MENU> button/<ENTER> button/asqw buttons
Used to navigate through the menu screen.
Also used to enter a password in the [SECURITY] menu or
enter characters.
3 <INPUT SELECT> button
Switches the input signal to project.
4 <LENS> button
4 <LENS> button
Adjusts the focus and shift (position) of the lens.
8
9
10
11
12
2
3
4
5
6
7
1 <VIDEO IN> terminal
This is a terminal to input video signal.
2 <COMPUTER 1 IN> terminal
This is a terminal to input the RGB signal, YC
B
C
R
/YP
B
P
R
signal,
or Y/C signal.
3 <COMPUTER 2 IN/1 OUT> terminal
This is a terminal to input the RGB signal or YC
B
C
R
/YP
B
P
R
signal.
Also, the RGB signal or YC
B
C
R
/YP
B
P
R
signal input to the
<COMPUTER 1 IN> terminal can be output to an external
device. Video signal is output when the input is switched to
COMPUTER1.
4 <DVI-D IN> terminal
This is a terminal to input the DVI-D signal.
5 <HDMI 1 IN> terminal/<HDMI 2 IN> terminal
This is a terminal to input the HDMI signal.
6 <DIGITAL LINK/LAN> terminal
This is a terminal to connect a device that transmits video
signal or audio signal via the LAN terminal. Also, this is the LAN
terminal to connect to the network.
7 <LAN> terminal
This is the LAN terminal to connect to the network.
8 <AUDIO IN 1> terminal
This is a terminal to input audio signal. There are right input
<R> and left input <L>.
9 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
10 <AUDIO IN 2> terminal/<AUDIO IN 3> terminal
This is a terminal to input audio.
11 <VARIABLE AUDIO OUT> terminal
This is a terminal to output the audio signal input to the
projector.
12 <DC OUT> terminal
This is the USB terminal dedicated for power supply. (DC5 V,
maximum 900 mA)
This can be used when a power is needed to be supplied to a
wireless display adaptor, etc.
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
1
1.2 Control panel
1.3 Connecting terminals
Click on the first or last page to see other PT-RZ575 (serv.man4) service manuals if exist.